Reviews
Satisfied with just the right size and cool typeface.
I purchased this as a number plate for off-road racing.
There are three cards with the same number.
Compared to the Off-roadNumber Plate of other manufacturers, it is a thin material, so when it arrives, it is very thin and not as thin as the Off-roadNumber Plate of other manufacturers. 'Won't it peel right off if it's this thin?' I had no problem washing the car while it was running and afterwards.
I have not tried the high-pressure car wash yet, but I think it is Large sturdy if you are conscious of not exposing it directly to water.
I trust it because it is a Number Plate handled by BONSAI, which is an expert on Race (laughs).
Size selected is approximately 85mm in height.
I put it on my Husqvarna 2016 TE250 and it was just the right Size.
I felt that the typeface was distinctive, but a friend of mine who was watching the Race That Number Plate was easy to read. so it seems to be highly visible from a distance.
View detail
3pcs in 1set, before quantity:Pair (for Left and Right) Cost-effective and can be affixed to
[How is it used?
Dress-up of my car?
Was the one you received as per Image?
I think it is as per Image.
How was your experience with it?
Some places to paste the Number Plate may be curved, so it is better to paste the Number Plate on a flat surface if possible,
[Points to note]
The area where the Number Plate is to be applied should be degreased and wiped clean.
How was your experience with it? As mentioned in the previous section, it is better to use a heat gun to warm up the paste before slowly applying it to places where the paste surface is not flat or curved.
How did it compare to other products?
The price is low and there are 3 pieces in 1 SET, so Upper Cowl and Quantity on the front:Pair (for Left and Right) It is good because it can be attached to the Cowl of
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
It is recommended to degrease and wipe the area to be used for affixing the Number Plate beautifully in advance.
If the surface is not flat or curved, it is better to warm it up with a heat gun before applying the paste slowly.
View detail
for RaceNumber Plate
[How is it used?
I purchased this as a SIDE and UnderNumber PlateSticker for Road race.
How was your experience with it?
I usually use a Number Plate Sticker from KITACO, but Webike discontinued it, so I looked for something close and bought it. 9 was the Number Plate, but Sticker 6 was in stock, so I used 6 upside down.
How did it compare to other products?
I think the numbers are longer and narrower than the Sticker I used to use, perhaps for Off purposes? I think the numbers are longer and narrower.
Also, the thickness of Sticker seems a bit thick.
[Points to note]
When I put it on the part with R, air gets in and it is hard to put it on well, so I use heat gun and struggle more than usual Sticker.
Especially, when I want to sticker to Seat Cowl, my Motorcycle needs to cut the sticker,
I had a hard time putting it on well. (Even after it was pasted, the workmanship was not good.)
View detail
The usual Number PlateSticker was discontinued.
[How is it used?
I purchased this as a Front License PlateSticker for Road race.
How was your experience with it?
I usually use a Number Plate Sticker from KITACO or similar, but Webike had discontinued it, so I looked for something close and bought it.
How did it compare to other products?
I think the numbers are longer and narrower than the Sticker I used to use, perhaps for Off purposes? I think the numbers are longer and narrower.
Also, the thickness of Sticker seems a bit thick.
[Points to note]
When I put it on the part with R, air gets in and it is hard to put it on well, so I use heat gun and struggle more than usual Sticker.
View detail
Durable even off-road!
I bought and pasted it for competing in an off-road race.
Although the area of the Number Plate was small for Endu-LANCER, the exquisite large size of the Number Plate, with good visibility and a size that does not cause trouble where it is attached, convinced me that the Number Plate was produced by a shop that knows the field.
The Number Plate fell down many times during the race, and although there were some scratches and scuffs on the Number Plate, it did not peel off until the end.
I would like to purchase this product again before the next Race, so please make sure you have all the numbers in stock.
View detail
Ideal for off-road vehicles
Even the recent Side cover of Smallest Motorcycle has this Quantity:Set is a good place to put it. I buy them because I race a few times a year and it's a hassle to cut them out. View detail
Design and Size are good
Design and Size are just right, but not so durable. View detail
Buy for Race
I'm going to participate in HappyEnduro, an off-road Enduro race!
So, we needed Number Plate and purchased this product.
It contains 3 pieces per set, Front mask and Quantity:Pair (for Left and Right) The number seal could be pasted with the number seal of the
I have a CuttingMachine at home, but to be honest, it's a hassle, so I'm very grateful to be able to buy it this way.
View detail
Race Specification (appearance oriented) If you want to...
[How is it used?
Used for Cowl's Dress-up.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
The texture is solid and does not seem to be peeling off, etc., as it can be used in actual races.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Nice webshop
I like OEM parts. Everything was delievered as aspected. Shiping as aspected. I will return when they have been assembled View detail
Friendly design, but
I purchased this product for Circuit running. Part of the top of the base paper is peeled off, and it is a kind design that is easy to stick, but the glue overflow and stickiness are terrible, and the base paper is hard to peel off.
After you put it on, the overflowing glue spreads when you rub it, and it looks dirty (laughs)
View detail
for people who don't want to make their own work
I used this at a track meet that required a Number Plate display.
I just flicked it on and off, but it didn't wrinkle and I was able to put it on. There is no problem even on a curved surface.
It's not cosy, but it's easy and good.
The number of sheets is 2 per 1pc. so be careful when buying!
View detail
This is a normal Number PlateSticker.
I used this at a track meet that required a Number Plate display.
I just flicked it on and off, but it didn't wrinkle and I was able to put it on. There is no problem even on a curved surface.
Also, I used White, but with Cutting sheetMaterial, there was no color smear and the color was beautiful.
But the price is a little high. If you need to cut, paste, or use it many times, it is better to learn how to make your own Kill.
View detail
for Race.
[How is it used?
I bought this for the Enduro race.
I usually have someone with a CuttingMachine cut it for me, but I realized at the last minute that the number was different than usual and panicked and chose this product. I'm glad it was in stock! Thank you WehBig.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Just stick it on.
Because it was 2 digits this time, it was easy. Sometimes, if it is a popular course in the FUNClass of JNCC (such as the old Mt. Yaga), because there is a case of 4-digit Number Plate, it is better to match the place once if it is possible to paste.
How was your experience with it?
I am satisfied with the easy-to-read Number Plate.
Some people often make a dirty Number Plate with Vinyl Tape or Gum Tape, but since it's hard for the Race tallying Staff to check, I want them to be cursed with not being able to get around because of Stack or MachineTrouble happening. It's really annoying. Don't compete in Level.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It's always nice to have a good inventory.
View detail
Best size for Off-road motorcycle
[How is it used?
Purchased to compete in the Enduro race on a HUSQVARNA TE250.
I always buy it because it's too much trouble to Cut it every time every time.
Before, Quantity because it contains 3 sheets when you buy one:Pair (for Left and Right) Minutes, no problem.
How was your experience with it?
There are other products, but this size is very convenient for sticking on the Small Space of Off car.
I think the durability is also there because it doesn't come off even if I wash it several times with a high-pressure washer.
[Points to note]
If I do it while warming it up with Heat gun etc., I know that I can put it on beautifully, but I put it on properly every time, but because Size is Small, I can put it on properly in that way.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Cheap and selectable numbers
I love that I can choose my favorite number and there are three in the package.
It might be useful for the person who does StickerTune.
I made myself 1 and 2.
View detail
If you think about the hassle, it's more economical to buy.
Purchased for the Enduro race as it is mandatory to install the Entry and designated Number Plate.
I thought about making it myself using a cutting sheet, but I thought it would be better to buy it considering the time etc. I chose this product which is also reasonably priced.
The size was Large and Small, but both were in line with the Race regulation, so I chose the Small one.
I was able to get over the race without any problem if I polish it with degreaser before sticking.
I think it's durable to some extent if you don't use it wrong.
View detail
If you think about the hassle, it's more economical to buy.
Purchased for the Enduro race as it is mandatory to install the Entry and designated Number Plate.
I thought about making it myself using a cutting sheet, but I thought it would be better to buy it considering the time etc. I chose this product which is also reasonably priced.
The size was Large and Small, but both were in line with the Race regulation, so I chose the Small one.
I was able to get over the race without any problem if I polish it with degreaser before sticking.
I think it's durable to some extent if you don't use it wrong.
View detail
If you think about the hassle, it's more economical to buy.
Purchased for the Enduro race as it is mandatory to install the Entry and designated Number Plate.
I thought about making it myself using a cutting sheet, but I thought it would be better to buy it considering the time etc. I chose this product which is also reasonably priced.
The size was Large and Small, but both were in line with the Race regulation, so I chose the Small one.
I was able to get over the race without any problem if I polish it with degreaser before sticking.
I think it's durable to some extent if you don't use it wrong.
View detail
Necessary for the Race
It's a must-have for Road race, Enduro, Motocross and Race.
If you have a cutting sheet and a cutting machine, you can make this product.
Material is firm and stretchy and doesn't leave a sticky residue.
View detail