Reviews
Bag and Quantity:Set and practicality at its best
The bracket on the underside could have been made a little more parenthesis. I attached the CenterCarrier bag for SUPER CUBCROSS CUB of the same manufacturer, and it went on without any problem. View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
Dedicated Bag is convenient
The bag is also Waterproof Specification and uses a watertight fastener, so you don't have to worry about sudden rain.
It is useful for holding simple tools, Touring net, and Cableetc. for recharging.
It does not lose its shape, but if you attach a bag normally, the length of the belt is quite excessive, so it may be a little troublesome for those who take or attach a bag depending on the situation.
I leave it on and I tuck the excess Belt so that it is not visible.
The installation of the Carrier itself is easy.
Since we will also use Crankcase Bolt for Engine, I would like to have at least Torque wrench.
However, the Multi Bar is difficult to see Navigation even if a Smartphone Holder is attached to it due to its position, so I could only think of attaching a Drink holderetc. etc. (I have not installed anything, though.)
Also, if you put too much stuff in the attached Bag when refueling, the open Seat will fall right out of the way.
Personally, I think it is a very good product.
View detail
It's Wilde, isn't it?
I wanted a rugged Image, Wilde feel, so I chose this one, although it is more expensive.
A short Hexagonal Wrench may not be able to reach it.
It is my favorite as per Image.
View detail
Name Chain
To increase load capacity as much as possible, CenterCarrier was considered.
The CenterCarrier is also GCraft, as it is also equipped with a GCraft front carrier, to create a sense of unity.
The Plate area of Silver is quite large, so the impression you see changes at once and the Machine feeling becomes stronger.
The load capacity is said to be 1 kg, but there is room for maybe 3 kg.
The installation itself is easy, but be careful only to install and remove the bolt that attaches to the MotorcycleBodyFrame.
The Bolt is screw-cut so that it enters the Bolt at an angle, so if you do not do it carefully, you will break the screw threads.
OUTEX SteeringStabilizer is installed, but it interferes with the Handlebar when it is cut to the fullest, creating a dent. The surface finish is beautiful Silver, but it seems to scratch easily.
The system is compatible with the Mole System standard, so various bags can be loaded in a variety of ways.
View detail
As expected
Installed on a CT125. There are many manufacturers, but I bought this one because I liked the shape best and the paint was well done. The price is a little high, but I am satisfied. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
CUB in the world
SUPER CUB is a must-haveItems (o^O^o) View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
Cheap! That's it.
[How is it used?
I installed it on my CUB that I use for commuting.
They are always out of stock, but I just happened to have some in stock, so I popped them in.
Recommendation to buy without hesitation if it is in stock. It is inexpensive.
Was the one you received as per Image?
It's even chubbier than the Image lol.
I don't mind because the price is the price.
Was the installation difficult?
There were a few areas that didn't fit, but Power solved them.
Power solves everything.
How was your experience with it?
There is nothing in particular to put anything on it, but you can put Gloves between them.
Actually, it's FashionCarrier.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Bolt is too chunky. You should replace this one.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
I rushed to buy it before it was out of stock.
The manual was confusing, I was worried that it might break the leg shield, but it seems to be fine, it's good enough to put on gloves, it's good because it doesn't leave shoe marks on the leg shield, it's FCarrier and Quantity.:I bought it because it gives a sense of unity when attached as a Set. View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50
Installed on JA60CROSS CUB!
[Usage]
It is installed on a JA60CROSS CUB.
I tried to aim for loading Up in Touringetc.
Was the one you received as per Image?
I was not sure about the color Black, but I think Silver would also look good on the PcoBlue body.
Was the installation difficult?
It was easy. There was no distortion in the product and it was installed Smoothly.
The Body may be scratched if the installation work is not done with care.
How was your experience with it?
It is now loaded Up and I like the way it looks.
[Included Parts:were they on?
No problems. Seems reliable.
[Was there anything that disappointed you?
One Flat Washer was deformed. Since there seems to be no performance problem, we are using it as it is.
Point and hang of installation
If you work according to the Instruction Manual, there is no problem.
Since the OEMBolt on the body side may be tightened by the devil's Torque, care and force are required when removing the OEMBolt.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cub Pro110, HONDA Cub Pro50
Waited quite a long time because advance reservations must be made But when received, it's very cool. View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50
It was easy.
This is a great product.
Quality and accuracy unquestionable!
In the beginning, I put it on for the purpose of Guard of the car body because I kick it off with my legs, but I'll try to devise a way to put it on Porch.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50
No problem with installation accuracy in operation
I was worried because the front side of the Carrier was too wide and it was difficult to install in other people's impressions.
I received the product and was able to install it successfully.
However, "Front side is wider. It is a fact that the Bolt hole on the front side of the Carrier is
Quantity:Pair (for Left and Right) Both were less than 1cm away from the vehicle.
The Rear side is Exactly to the vehicle's mounting area, and is a sure precision.
I see this precision in your eyes. "'Is the Front side deliberately wide?' I thought
ahead of time "Wide." I temporarily fastened the Front side, but I was able to install the Bolt that came with the product because it was somewhat long.
When the front side is tightened to the specified torque value after the rear side is temporarily fastened, the front side of the carrier seems to have tightened while slightly flexing.
On my vehicle, the Bolt (2 out of 4) that came with the vehicle originally were tight and
It was important to note that there was a possibility of licking it when removing it.
I used the Spinner Handlebar because I felt it was too dangerous to use a normal driver.
I put the Bag on it after installation and thought it would be better if it was longer front to back.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO
To protect the top of the Fender when getting in and out!
Due to the box on the Rr, if I straddle it with my feet behind me, it hits me, so I have to straddle it from the front, and my shoes rub the top of the Fender (either way...maybe it's also due to aging and not being able to lift my feet! LOL).
As for me, I don't intend to put any luggage on the Fender, but I installed this and no longer rub the Fender with my shoes (and rehabilitate my feet a little higher!). lol). And of course I can put my luggage on it!
As someone else wrote, I was worried about Center Gap since it is shared with other models, but no Center Gap on my CROSS CUB. And it looks GOOD!
(If only there was something a little cheaper in terms of price...)
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cub Pro110, HONDA Cub Pro50
That was proprietary
The length of the Bracket is wrong as reviewed in other sites and so on I drilled a new hole in the Cowl and installed it because it was going to be gutted against the Cowl, although I could do it The only thing that is disappointing about this product is the accuracy of the bracket It was If you are really concerned about accuracy and appearance, I think the Carrier from Takemoto or KI◯ACO is a good choice It's a good choice If I can do the processing myself, this one has more flavor, so I'm personally satisfied with Large View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
I think that the price is cheap
The price is cheap and the shape is also good
Making is rough
If you do not take BALI
I will injure your hand
When you should take it, scratches will just hit the Leg shield
Please take care.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
Purchased with Mesh Inner Rack
Large I thought that they would be attached separately but I did not attach it outside so I processed a little rack.
Then we managed to install it so there is no problem.
Also, I added a spare Tank and made it before Seat, but it was a good position for height so there is no problem.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
I am surprisingly firm.
Custom not too customized for CUB. I thought it would be Betokari. It is easy to install and it is not a good place to work especially because it is nice and good. When loading luggage actually it will be necessary in the atmosphere, but you will need codes etc.. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
Quality is reasonable
I arrived earlier than I expected.
I will break the packaging to install it immediately.
Right The front Bracket was turning inward.
Okay so okay w
Straight down with Pliers.
Screw hole BALI, steel material cutout part BALI and so on hand w
I cut off the dangerous part, but at the same time I have to cut Plating and so I will paint rust once..
I attach it to my car LITTLE CUB
Body was also distorted overall.
After attaching One Side, we will bring it back to force.
Installation is easy because it only stops Bolt in 4 places.
It's quite powerful with Spring like Nasumi Take. Tha Brett I thought I was going to sandwich it, but it is likely to be destroyed and I am considering what to pinch.
It was OK at all because I attached it with an emphasis on appearance.
I have not decided what I can post, but it is cheap and plating is more satisfying.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
purchased since it increased although appearance was smart and the load was also little -- there is almost no description and unkind.Since attachment was found when seeing the photograph of the goods List, it put between the Washer and Plate of
purchased since it increased although appearance was smart and the load was also little -- there is almost no description and unkind.Since attachment was found when seeing the photograph of the goods List, it put between the Washer and Plate of a Bolt which are fixing the Leg shield, and attached.For exclusive elegance, even if shakiness does not have attachment and it straddles by a Bolt on, it does not become obstructive.however,
restricted to a Leg-shield wearing vehicle -- when the Gasoline carrying can was stacked instantly, it became comfortable good touch.Although a binder function occurs in the center of a Carrier, a load can be inserted, and there are few loads which whether there is any opportunity to use not much can
--(=omega=;)
Stack, it becomes a picture even if it is stacking nothing, since the Design of a Carrier is good.When dissatisfaction removes a Leg shield, it becomes time and effort. -- Aren't they things?
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
A price is cheap and quality is also the passing mark. The first reason for having chosen this is that it did not want to soil the Lec Shield with shoes.
A price is cheap and quality is also the passing mark.
The first reason for having chosen this is that it did not want to soil the Lec Shield with shoes.
View detail