Reviews
SP Mukawa CenterCarrier
Purchased for SUPER CUBC125.
ExactFit to CUB with Refreshing Design.
There are carriers with extravagant designs, but this product is simpleis the best and well-made.
I think the price is a little high, but I agree that it is a Brand.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50
CenterCarrier glad I put it on.
It is thicker and very suitable for CROSS CUB.
I bought the matte black, but it was a bit textured and I would have preferred it not to be matte.
There are several protrusions to hook the Rubber string to secure the luggage.
The quality is good but a bit expensive.
This product itself was easy to install even for a beginner like me, but the Screw originally attached to the Body was so hard that I had to have it removed by a motorcycle shop.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50
The stable Mukawa Brand!
I wanted a solid CenterCarrier and chose Mukawa's Aluminum CenterCarrier.
As one would expect from a Mukawa product, it is solidly built! It feels quite Firmly.
Since the side cover is likely to be scratched during installation, it is recommended to install it after preventing scratches by using curing tape, etc.
View detail
the second time
I have been using it since I was riding LITTLE CUB, and it is simple and very good. View detail
practicality first
I bought this to have more room for my luggage when I go camping. I found that a Carrier with a Hook on the Carrier is more practical than a Net Carrier with a Hook on the String.
I can buy some food at the store and get a packing String and still have a proper fixed load. This is good. Carriers that focus on looking good don't have a Hook, so this is difficult.
View detail
The area near the Screw stop Plate at the Center has rusted.
A packing cord is also included for ease of use.
However, it rusted within six months of purchase.
I don't ride in the rain. Protect your car body with Cover when you go out.
Home is kept at Garage and not on the coast.
And once a month. Raspene." I was wiping the CROSS with the CROSS.
I will not purchase any more.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50
Installed on JA60CROSS CUB!
[Usage]
It is installed on a JA60CROSS CUB.
I tried to aim for loading Up in Touringetc.
Was the one you received as per Image?
I was not sure about the color Black, but I think Silver would also look good on the PcoBlue body.
Was the installation difficult?
It was easy. There was no distortion in the product and it was installed Smoothly.
The Body may be scratched if the installation work is not done with care.
How was your experience with it?
It is now loaded Up and I like the way it looks.
[Included Parts:were they on?
No problems. Seems reliable.
[Was there anything that disappointed you?
One Flat Washer was deformed. Since there seems to be no performance problem, we are using it as it is.
Point and hang of installation
If you work according to the Instruction Manual, there is no problem.
Since the OEMBolt on the body side may be tightened by the devil's Torque, care and force are required when removing the OEMBolt.
View detail
I guess I value looks more than practicality.
Since we cannot put too large objects on it and only tie it with a string, it is installed for its appearance. View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50
The quintessential Mr. Mukawa.
A certain Large hand mail order first. KITACO KITACO:FashionCenterCarrier". I purchased the It was a little cheap and I thought it was the most suitable for my use as far as I saw in the photograph.
However, when installed, the front and rear Quantity:Pair (for Left and Right) It is very distorted to the body of the car. It is a structure that can be adjusted to some extent, but it was not in the range that can be covered by adjustment very much.
I've been talking about other companies' products for a long time, but in the end, I couldn't stand it for a week and replaced it with this product.
It's the quintessential Mr. Mukawa Quality! It would have been great to have a larger size for my use, but I'm happy with the large size.
Should have bought this one from the start!
It was not a cheap tuition.
View detail
Look at the picture.
The part in the image is bent, right?
Right above the middle, such a prominent place is this accuracy?
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO
Purchased for scratch protection
It contains many Screw and colors and is suitable (Quantity).:Pair (for Left and Right) If you don't use the right one, you will get Center shift.
Anyone who points out Center misalignment on Impression is using the wrong color and Screw.
Hexagonal Wrench is necessary, and I think that the difficulty of installation is high. I think the price is also a little high;
I bought this product to prevent scratches, and I'm happy with the design and the product.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50
It was easy.
This is a great product.
Quality and accuracy unquestionable!
In the beginning, I put it on for the purpose of Guard of the car body because I kick it off with my legs, but I'll try to devise a way to put it on Porch.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50
No problem with installation accuracy in operation
I was worried because the front side of the Carrier was too wide and it was difficult to install in other people's impressions.
I received the product and was able to install it successfully.
However, "Front side is wider. It is a fact that the Bolt hole on the front side of the Carrier is
Quantity:Pair (for Left and Right) Both were less than 1cm away from the vehicle.
The Rear side is Exactly to the vehicle's mounting area, and is a sure precision.
I see this precision in your eyes. "'Is the Front side deliberately wide?' I thought
ahead of time "Wide." I temporarily fastened the Front side, but I was able to install the Bolt that came with the product because it was somewhat long.
When the front side is tightened to the specified torque value after the rear side is temporarily fastened, the front side of the carrier seems to have tightened while slightly flexing.
On my vehicle, the Bolt (2 out of 4) that came with the vehicle originally were tight and
It was important to note that there was a possibility of licking it when removing it.
I used the Spinner Handlebar because I felt it was too dangerous to use a normal driver.
I put the Bag on it after installation and thought it would be better if it was longer front to back.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO
To protect the top of the Fender when getting in and out!
Due to the box on the Rr, if I straddle it with my feet behind me, it hits me, so I have to straddle it from the front, and my shoes rub the top of the Fender (either way...maybe it's also due to aging and not being able to lift my feet! LOL).
As for me, I don't intend to put any luggage on the Fender, but I installed this and no longer rub the Fender with my shoes (and rehabilitate my feet a little higher!). lol). And of course I can put my luggage on it!
As someone else wrote, I was worried about Center Gap since it is shared with other models, but no Center Gap on my CROSS CUB. And it looks GOOD!
(If only there was something a little cheaper in terms of price...)
View detail
Cross Cub Vietnam Carrier
I've bought several carriers, but this is the one I'm most satisfied with. First of all, the bolted part is exactly the same and the product itself is sturdy. It seems to be suitable for use as a luggage. The price is higher than other products, but I think it is because it is made of aluminum. I recommend buying several carriers, but this is the most satisfying. First of all, the bolt fastening part is exactly the same, and the object itself is also solid. It is recommended translated by Google Translator View detail
Fits: HONDA Super Cub 50, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO
There is a Gap from Center and it is diagonal
It's not purchased from Webike, but it's a good reference
This product can be installed at the same time as NORMALLoading Hook and I chose it for the peace of mind that comes with OEMOption
But no matter how you install it, it will be at an angle
Manufacturer's product description is
The CarrierBody has an OEM style shape that does not alter the image of the SUPER CUB By using this, there is no sense of discomfort at the time of installation, and it is fitting like OEM parts You will enjoy the customization
And
Fitting like OEM Parts, but if this is an OEM Product Problem Level There is a lot of discomfort when wearing it
Is it set up in OEMOption and is it not causing any problems?
I had the dealership talk to the Manufacturer, but the
Due to the individual differences in each vehicle and the specs, leaning will occur
I was not able to get any response from them
It's not at all what the product description says, so people who are thinking of buying it should be careful I think
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50
The price is right at less than 10,000
The order was placed directly with Takekawa, but the sales schedule for the end of May was postponed several times, and it was not delivered until December
When one screw is temporarily fixed, the screw on the other side will be replaced by the one on the Front side does not reach
The pipe diameter was too big to be hand bent with Manpower After a hard fight, the eye screw on the car body side became stupid and I had to cut the screw again It might be better to ask a motorcycle shop to cut the screw I can't be satisfied with this quality level unless you pay less than 10,000 yen for it
View detail