Reviews
Not much change.
Maybe it's not necessary at this price? View detail
Koo~ Oshii ?? (?"-??? -?) ?".
I used to get frustrated when I couldn't remove the CALI Sticker from my Number because I couldn't remove it to Beauty, but thanks to you, I'm going to be free from frustration ^^.
I think it is a good purchase because it can also serve as one point of dress-up.
…… is,
When I installed it, it was too close to the NumberLeft hiragana, so it took about a quarter of the time as it was.
The hole was enlarged horizontally in Drill and shifted to the Limit to finally achieve the current shape (see image).
I can't say for sure, because the form of Number varies from region to region, but at least in my area Number requires processing ^^;.
I also thought it would have been better if the four corners were slightly rounded.
View detail
Fits: HONDA CRF110F, HONDA CROSS CUB50, HONDA CROSS CUB110, HONDA MONKEY125, HONDA CT125, HONDA TRAIL125, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
It looks beautiful, but!
The original shape is a little smaller than the original, but the Mizo is a little larger! View detail
Insufficient strength
Material:It is aluminum, so be careful not to overtighten. It can be easily broken. View detail
PetitCustom
Bleeder Cap is usually used for Material:The rubber cover is available in anodized color, and the aluminum cover provides an enhanced texture.
We chose the color Black because we prefer the OEM look.
View detail
Fits: DUCATI MULTISTRADA V4, DUCATI MULTISTRADA V4 S, DUCATI MONSTER 797, DUCATI MULTISTRADA 1260, DUCATI MULTISTRADA 1260 S, DUCATI MULTISTRADA 1260 PIKES PEAK, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4 R
A little Bolt is better than a lot of Bolt
It is a small part, but I think it will increase the sense of customization.
The color is Black because I prefer OEMchic.
View detail
Confirmation of MODEL required
Installation is easy. I have been working on it since I purchased it.
The tool compartment has been removed and the hollow Space
I'm installing it only because I didn't like it.
Bore Ace, for better or worse, as improved versions are developed.
(A little sad when an improved version comes out after installation…(lol)) )
There are two types:the old Type? and the improved Type.
for Carburetor? (may need processing) The improved version is
It can be attached to FI Vehicles. Old Type is
It is not physically attached to the FI, so it is on the bore Ace itself.
I think it would be better to make sure.
Currently I am not sure which one will be delivered.
I was forced to put the old Type on at first.
View detail
I wish Logo had a choice.
It would have been better if the logo could have been chosen between ”Kawasaki” and ”KAWSAKI”.
The installation itself should not be difficult, but there are three recommendations for User's own installation.
1.Curing Fender with Toweletc.
2.Remove the cowling (see Photo 1 and Photo 2, actual working time is about 1 or 2 minutes)
3.The tip of the flat terminal of the Horn is sharper than expected, so protect the terminal when removing and installing the Horn.
The rest of the procedure is as described in the instruction manual.
Edge of Bracket is sharp. Chamfering is recommended for those who are concerned.
Since this is not a location that is normally easily touched, it was installed in its current state.
According to the instruction manual, the angle between the Horn and Horn Bracket is at about 14 o'clock, but we decided to set it at about 13 o'clock in consideration of the handling of the Wiring. Since there may be some individual differences, it is best to use the instruction manual as a basis and match it to the actual vehicle.
View detail
It was used for the dress-up of a tank and a fender up.
It was used for the dress-up of a tank and a fender up. View detail
One point
When attached to the license plate, it becomes a one point.
It is a Dice design, so it is unique and eye-catching.
The look from the Rear of the Motorcycle is a bit different.
The price is reasonable, so it is easy to buy and the quality is not bad.
View detail
Small personality, durability is …
I found it to be a very good product for One Point Fashion for my feet.
The work itself only requires replacing the Breeder's Cap, so even beginners can do it quickly and easily.
The texture of Anodized was good and I thought it was indeed a Kohken product.
But it's not very durable;
After six months, the Rubber cracked, and after about seven months, only the Aluminum Cap was missing.
It may be inevitable for the structure to fly away, but the caliper generates heat, and I would like to see the use of heat-resistant and durable rubber.
We wanted to take a look at the NORMAL Rubber cap, so we gave it a slightly lower score.
View detail
pleasant to look at
This time, I put this Holder in place of a Washer for the M10 Cap Bolt for the Exhaust System.
It is definitely better looking than the tasteless Washer. It also applies a good amount of surface pressure. I chose Silver, but there are many colors to choose from.
View detail
Fits: MV AGUSTA F4 1000 RR, MV AGUSTA F4 1000 RC, MV AGUSTA F4 1000 R, MV AGUSTA F4 1000, DUCATI SUPERSPORT 936 S, DUCATI SUPERSPORT 936, DUCATI SUPERBIKE Panigale V4 S, DUCATI SUPERBIKE Panigale V4 R, DUCATI SUPERBIKE Panigale V4, DUCATI SUPERBIKE 959 Panigale, DUCATI SUPERBIKE 955 Panigale V2, DUCATI SUPERBIKE 899 Panigale, DUCATI SUPERBIKE 1299 Panigale S, DUCATI SUPERBIKE 1299 Panigale, DUCATI SUPERBIKE 1199 Superleggera, DUCATI SUPERBIKE 1199 Panigale S, DUCATI SUPERBIKE 1199 Panigale R, DUCATI MONSTER 1200 R, DUCATI MONSTER 1200, DUCATI MONSTER 1200 S
Tandem Footpeg Removal Solution
Purchased to fill the Left Side Tandem FootpegBolt hole in the Exhaust Support installation on my Duka Motorcycle.
Well, that's normal.
View detail
Ideal for home-made Ducts, etc.
I used it to customize around the Intake of MT-09SP. Because I cut the introduction board of air to Large width and cut the hole of Air Box secretly, I put up a net to prevent Garbage from entering.
I chose Sugar Crystal because I can cut only the large size of the air cleaner.
View detail
To improve serviceability.
Since the other Cowl Fastener was not a D-Ring, I purchased the D-ring Fastener from CLEVERWOLF for improved serviceability.
As a result, it was not possible to use the Fastener because the diameter of the Fastener of the original cowl of other companies was larger than the Quick fastener that was purchased this time.
It turns out that it is rattling, and was informed here that there was size in Quick fastener, it was not able to use, but it is a good learning experience.
View detail
As for Repair, I recommend it
I bought it for the Repair of Race cowl for Saitaniya R25
But Size seems to be small and it was not usable for the Cowl of Saitaniya
I think it can be used for any manufacturer's cowl if the size is right
You should check the Size before you buy
View detail
The attention to detail is evident; perfect for dress-up Price is rather high
Where the OEM Cap has to use the Coins driver
The car is a used car, and I've been naffing it since I bought it
We use a lot of Parts from HAMMERHEAD, and
I bought it because there are not many other manufacturers with black colors available
The surface treatment is probably anodized, but only the color of the logo is changed
This area was stylish and particular
There is nothing wrong with it in terms of accuracy
Detachment will be Hexagonal Wrench, but with 6mm on the top side and 10mm on the bottom side Hexagonal Wrench is required
I don't think many people have a 10mm Hexagonal Wrench, so that's a good place to start Notes
Cost performance is a bit more manageable, though
View detail
Fits: HARLEY-DAVIDSON Universal
Valve cap and Quantity:Set
I wanted to incorporate Iron Cross Parts in the Chopper style, so I started with Valve I bought a Sudoku Screw in conjunction with the cap that I had changed I like the way it looks View detail
Not too bad
American car. It gives a Yankee feeling It's not so easy to install severe
It's also nerve-wracking to carefully apply the seal material and assemble it to prevent rain from entering
If you're not good at detail work, it's safer to quit
View detail
Fits: YAMAHA TT-R50E, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
Will it look a bit narrower?
I bought it at the same time with Zita's Brake hose clamp.
It has nothing to do with performance, but if there are Parts that can be exchanged, it will be the same color as before!
View detail