Reviews
RearTank Guard for cbr1000rr but can also be used for cbr600rr!
This is my first purchase of a~tech products and I think the quality is good.
I had removed the tandem footpeg and installed a single seat cowl, but the rear brakes tank was exposed and I felt something was not right!
When I put it on, I was satisfied without complaint!
If anyone is having the same problem as I am with the exposure of the Rear brakes tank with the Tandem Footpeg removed, this is a RECOMMENDATION.
By the way, the model of cbr600rr is 2bl-pc40.
View detail
The service hole cap offers an attractive yet practical design
About quality and texture - The service hole cap from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The service hole cap offers an attractive yet practical design and a simple solution when you are looking for a higher quality part when compared to the original that comes with the Monkey 125. Products to buy together - A key product to purchase to add a more attractive appearance to the Monkey 125 engine is the finned camshaft cover from G-Craft tht adds something real special where needed. Difficulty of installation - The installation of the service hole cap is a simple task that took 0.1 an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to service hole cap to the left crankcase cover. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the service hole cap is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the engine cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
The engine cap offers an attractive appearance
About quality and texture - The engine cap from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The engine cap offers an attractive appearance and a simple solution when you are looking for a higher quality part when compared to the original that comes with the Monkey 125. Products to buy together - A key product to purchase to add a more attractive appearance to the Monkey 125 engine is the clutch cover plate from G-Craft tht adds something real special where needed. Difficulty of installation - The installation of the engine cap is a simple task that took 0.1 an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to engine cap to the left crankcase cover. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the engine cap is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the engine cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Dress-up casually!
Since it is a BreedCap, it is not very conspicuous, but it is like a casual dress-up. View detail
Attached because it's cool.
I didn't put QuickSystem on it, nor do I Race it, but I put it on because it's cool and it's also a functional Part.
Neck the Drill and Nutter required for the work is expensive even though they are not usually used, but we found a tool that can be implemented cheaply.
Hand drill about 2,800 yen, A little nutter about 1,000 yen, 7.1mmDrill about 900 yen.
I was reluctant to drill a hole in the Swing Arm, but I took the plunge and did it, and since it is an aluminum Swing Arm, the hole opened easily.
The nut is also fixed with 2-component Epoxy when crimping because it would be disastrous if the nut spins out of place.
When crimping, care should be taken not to raise the screw threads since the aluminum nut is M5 and small in diameter.
The part where the chain hangs is chamfered and has a good texture, but the price is Neck.
View detail
Fits: HONDA MONKEY, HONDA SUPER CUB110, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA CHALY, HONDA DAX, HONDA CD90, HONDA CD50, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125, HONDA GORILLA, HONDA MONKEY, Others , HONDA SUPER CUB110ThailandMODEL, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA LITTLE CUB
Easy Dress-up
I bought it to replace the rear shock absorber.
One point can be fashionable.
When using this product, the washer that comes with the Rear shock absorber may or may not be used, so it is necessary to read the Instruction Manual.
Rear shock absorber in the photo is SP Mukawa Rear shock absorber Black 06-04-0152
This one product contains 4 Nut.
View detail
Fits: HONDA CRF300L RALLY, HONDA CRF300L, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250L, HONDA TRAIL125, HONDA CT125, HONDA MONKEY125, HONDA CROSS CUB110, HONDA CROSS CUB50, HONDA CRF110F
Well, it's only for appearance, but it's important to look good.
It's the look. Looks.
Motorcycle is a hobby, so it is a matter of how much you are satisfied with it. This item solves this problem, and it does not improve the performance at all.
If the OEM engine plug is too hard to remove, apply a Large thicker and harder Washer and turn it between the pliers.
As everyone says, it's expensive, so at least put an O-ring on it.
View detail
Emblem
It was an easy job, as there was no modification to be done, just remove and attach the Screws! View detail
Kawasaki Zephyr 400/550 dress up badge. A MUST HAVE
fantastic dress up part for the kawasaki zephyr 400/550cc. my bike now looks complete with this badge and the build quality is amazing. if i could give it 6 stars i would. View detail
m8Bolt to Fashion.
The m8Bolt is Fashion. The price is low, and the luxury is good. View detail
A must if you want to make Racer
Essential for quick detachment of Cowl View detail
Fits: YAMAHA TT-R50E, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
SEROWEngine plug
It has a beautiful finish and is great for one point custom.
Engine oil can be replaced without removing it.
Gasket must provide OEM.
SEROW, which is often a bit plain, will be a bit more fashionable.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
SP Mukawa BoltRetainer
Wow that's cool
Design is good
One Screw hits the Frame
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800
Reduced heat in the thigh area
The W800 has a Bevel Gear Cover that gets very hot in the summer, but this part makes it slightly better.
Installation is easy
However, the price seems too high, even for Carbon.
View detail
moon eyes love~!!
I love Moon Eyes products so much. My monkey car is plastered with Moon Eyes products everywhere. The license plate bolt is one of them. There are two types, but I bought it because I really liked the cute shape of the circle. Make sure to apply rock tight so that it doesn't get loose. I like it because it stands out as a point. I think we need to take good care of it so that it doesn't get contaminated. So that yellow doesn't turn black... Thank you. View detail
Fits: YAMAHA TT-R50E, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
SEROW、Engine plug
It is completely dress-up parts.
Functionally, nothing has changed, but the impression looks different.
The replacement work is easy and can be done even by beginners in machine tinkering.
Gasket is not included and OEMParts must be provided.
View detail
Poached!
Installed at the base of the Grab Bar on a Z900RS.
The Grab Bar itself is Black, so the Gold color is a nice touch with Pinpoint ?. (*?Please note that the) lucifer
Shorter and slimmer than OEMHook. It's nice.
By the way, I have Babyface's Stand HookV-type on my Z9, and here I have Black-colored SocketFlange on my Z9.
It is good to create a prominent Custom feel with LargeHanGold, but I am satisfied with the Custom that you have to look closely to see. (* 'Ω `*)
View detail
FashionParts
Parts have been around for a long time and are used in a variety of ways.
[How is it used?
Silencer Fixed
Was the one you received as per Image?
Image itself
Was the installation difficult?
It was so easy that I was surprised.
How was your experience with it?
Parenthesis has improved very much!
[Included Parts:were they on?
It came with an outer bag.
[Was there anything that disappointed you?
None at all.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Posh Face Machined License Plate Holder
I installed it on my first Motorcycle and the License Plate area looked tighter, so I bought it to install on my second Motorcycle. I think the cost performance is good. View detail
I thought it would go well with my old motorcycle.
[How is it used?
I was looking for a cap bolt with FUJI TSUBO Type color to replace the bolt for fixing the exterior of my SV650X, which has a delicate design and may or may not be a Neoclassical. I found this product and bought it.
Did you receive the item as per the Image?
This is a design that was the standard for this kind of aluminum spacer a long time ago. FUJI TUBO type. I thought it would be suitable for Motorcycle and Neo-Class cars of a while ago because of its highly universal nature with its uneven design, and the product was just as I imagined.
Was it difficult to install?
There is nothing difficult about this product, as it is installed by biting it in place of a washer when using a cap bolt.
How did you like it?
It's not a functional component. Power up!" Ya Fuel Efficiency! It is a product that does not have any effect on etc., only a slight change in appearance&Washer substitute.
Since it is made of aluminum material, each piece is light in weight and can also serve as a washer, making it a very convenient product that can be used in a wide range of applications.
One point can be used to add an "Accent" when installing the License Plate, which is not so easy to do with BoltSingle Body.
There is no effect of weight reduction, reinforcement, etc. (Strictly speaking, there is a slight increase for color.) I like this kind of products, but I appreciate it very much.
It may not be suitable for the newest model of sports type motorbike, but for the previous generation of Motorcycle and Neoclass etc.... "Chooey old." I think it will help to create a sense of
Was "Included Parts:" attached?
None
I purchased the "Titaniumium color" In Quantity:The price per set of 4pcs. is 1,734 yen, and the unit price per pc. is 433 yen. The price seems to go up and down slightly depending on the color, but it would be even better if the price were a little lower.
Were there any disappointments?
Not particularly
There are Anodized dyed products. The color of the image is different from the color of the actual product. If you are concerned about this, it might be better to check the actual product at a Motorcycle accessory store before ordering.
Make good use of the wide selection of 12 colors to add flair to the Accent of your car body.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use the Barnacle Collar when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
I am sure it will be Large sturdy as it just needs to be used as described above.
[Notes]
Continued exposure to UV rays for long periods of time will cause the color to fade. (The same goes for the exterior of a motorcycle.) When not riding, protect them from UV rays with UV Cut Body Cover or Garage Storage.
[ITEMS TO BUY TOGETHER
Cap boltTypeExclusive Since it is like a collar, prepare a cap bolt of each material& length that you want to install.
[Opinions and requests to Manufacturer
Quantity:1 Set of 10pcs. is 10% cheaper or Quantity:It would be even more appreciated if there is a discount for purchasing large quantities, such as 20% discount for 1 set of 20pcs.
View detail