Reviews
Many SR riders use it! (p∀p) aha!
[How is it used?
I wanted to put something Iconic on my car, so I decided to use it.
Was the one you received as per Image?
I believe I received the exact image of the product.
The inside of the lid has a tight Rubber so I thought the waterproof property was also good.
Was the installation difficult?
I think it depends on the installation location, but it was not difficult because I just crimped it into the available hole.
More than that - I was worried about the Logo to put inside, mainly because of the angle!
How was your experience with it?
Once attached, it does not bother me. The place where it is attached is not visible when riding, and it is completely self-satisfying.
[Included Parts:were they on?
No, it would be better not to add "Included Parts:" to increase the price.
[Was there anything that disappointed you?
None 。
It is a good Manufacturer that also offers Logo that fits the size.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Before purchasing or installing the product, it is recommended to test the product on a piece of paper, etc., against the part of the car body where you plan to install it to see how it will look, so that you will not make any mistakes.
View detail
![[Mr Quick] Side Cover Bolt](https://img.webike-cdn.net/catalogue/images/130748/mr19-cc06-bk_TS.jpg)
NORMAL Screw is lame, right?
I wanted to replace the NORMAL Screw because it smelled like a potato, but I didn't like the gear-like Knob from another Manufacturer.
I decided on this one, because it is a Round Type, which has the drawback of being slippery when turning it, but it was Large and durable when I was wearing Gloves, which prevent my fingertips from slipping. If it is not wet, you can turn it with bare hands. If you are looking for practicality, the gear-shaped Knob is definitely easier to turn, but I decided to go with this one because of its looks.
I love it
View detail
CALI Seal
When CALI seals are affixed to the License Plate, the adhesive residue can be a problem when replacing the seal. In the first place, due to the excessive number of registered vehicles in some municipalities, the number of letters on the plate may be too many, and the plate may be covered with the letters, making it difficult to affix the seal neatly.
The product in question is just a Plate that provides a dedicated place to affix a CALSeal next to the License Plate.
It is a simple Level product that some people can cut out of steel or acrylic plate and make themselves.
However, when I picked up the product, I found it to have a nice texture, and considering the time and effort required to make it myself, I think it is an easy and cost-effective product.
However, I am a little afraid that I might scratch the Dustclothetc. when wiping it off when washing the car.
View detail
Fits: HONDA Super Cub 50, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA SUPER CUB110ThailandMODEL, HONDA CUB100EX, HONDA CROSS CUB50, HONDA SUPER CUB 50
Chain case hole replacement
Too easy to install, conversely, theft is a concern. View detail
heavily
Before purchasing the product, I thought it would be lightweight, but when I picked it up, I found it to be quite heavy. But when I picked it up, it was quite heavy.
Installation is very easy. Simply attach with the included double-sided tape.
If you put it too far back, it will hit the headlight when you brake. （It is better to put it in a position where it does not interfere with the headlight when stroking before putting it on.
It is very solid and doesn't seem to break.
Since the double-sided tape is not very forgiving, I am thinking of drilling holes in it and attaching it sometime in the future.
Parenthesis is better and Large is satisfied.
View detail
Custom
Recommended for those who do not want to put CALSeal directly on the License Plate! View detail
Good product at a reasonable price.
I chose them based on price from a number of companies, but I am satisfied with the QUALITY, which is more than I had imagined.
Quantity:1pc. eye photo
Material:Stainless Steel Body with Rubber packing and Material:Waterproof performance cannot be guaranteed and is for reference only.
Second and third pictures
The front fork boots and Fender mounting screws were loosened, and the EmblemHolder stays were inserted into the gap between the front fork boots and Fender.
View detail
Quality as good as the price
There are similar products with lower prices, but I am satisfied with POSH products because of their higher quality. View detail
Material:Aluminum, but heavy in its own way.
When used as a Sticker Plate, it is mounted on the Left side of the Number, so the KN imprint is on the reverse side, facing sideways.
It is a little too big to use as a Key Holder.
I'm not the only one who thought it came with a Key Holder in addition to the Plate.
View detail
Beautiful browning
I really wanted the Titanium color as it is, but Webig didn't have it in stock, so I bought this product.
Well, it is not so noticeable even if it is replaced, and it is a product for self-satisfaction.
View detail
Mounted on Riser bolt
The OEM Riser installation was a Type with the Bolt sticking out of the Nut.
I installed it for a blindfold, but because of its size, it was not as SMART as I had imagined.
View detail
One point of individuality.
Originally Posted at United Kingdom Tax Certificate to Motorcycle
Items for posting. Easy.
You can also change the contents.
Good for a change of pace.
View detail
License bolt Green color
Beautiful. I like the color.
It was easy to install.
View detail
I need an Instruction Manual.
High quality for the price.
I just want an Instruction Manual!
View detail
ได้รับสินค้าแล้วครับ/ตรงตามที่สั่ง/สิ้นค้าไม่เสียหายใดๆ/ใช้เวลาในการส่งไม่นานมากครับ/มีโอกาสจะคงสั่งต่อไปครับผม View detail
Fits: HONDA Super Cub 50, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA SUPER CUB110ThailandMODEL, HONDA CUB100EX, HONDA CROSS CUB50, HONDA SUPER CUB 50
Looks good!!!
Checking Chain tension and mere window for refueling "Lid. But I'm all about the looks!
Texture is Up to Large width than Plastic lid!
As for installation, as mentioned in the Instruction Manual, the inner O-ring can be installed normally, but the outer one has to be put in one side while pulling it into the gap, and finally pushed in, so it is difficult to manage to fit it inside without it sticking out... (sweat)...
This price for just a lid... (laughs). Recommended for those who value appearance.
View detail
PetitCustom
Texture and quality are good, but not cosmetic enough for PetitCustom?
I'd still be in the $3,000 range!
View detail
PetitCustom
I got the PetitCustom and was concerned about the holes after the Fender Eliminator, but I'm glad I did. I wish the price was a little lower so it would be easier to buy... View detail
Classical is the way to go!
The material and design are very classical. It's easy to install, and it's a VERSIONUP to a fashionable cafe racer right away. View detail
Fits: その他 , YAMAHA SR500, YAMAHA SR400, SUZUKI ST250, SUZUKI VOLTY, KAWASAKI W650, KAWASAKI W400, KAWASAKI ESTRELLA
Used for MeguroK3
Classic fenderFront from the same manufacturer (WW-FF1GEL) It was used in conjunction with
Holes were drilled using a method that came up in a Net search, using masking tape.
The gap between the thickness of the Plate and the Bracket is not Exactly, so the Plate moves around when assembled properly.
If you are concerned about this, you should twist the Bracket to assemble it, or adjust it by collapsing the gap between the Bracket.
Plate will peel off color quickly during assembly.
View detail