Reviews
It became Dress-up.
I bought it for Dress-up. Because it is the same shape as the OEM Product, it was easy to install without the need for machining. However, it is a place where it gets hot, so I'm not sure if it will discolor in the future. After use, if there is change I will imprint again. View detail
Fits: YAMAHA TT-R50E, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
Cool ... I'm pretty ... really cool ...
It's Impression of Hey Guys! Kazu !!
It has been cut out with high precision and it is super cool..
With this price Machine will be Race ish at once.
Regarding installation, we attach OEMCover 's Rubber Seal here. Reuse There is no problem at all.
I'm Blue's WR 250 R but for those Parts absolutely Red you can point to the point!
View detail
With Bit Bolt alone
I was holding it, but since it is a fatherhood I tried putting a cap Holder etc. Is good. ★ It was five if the color was a little more colorful. View detail
Fits: その他 , YAMAHA SR500, YAMAHA SR400, SUZUKI ST250, SUZUKI VOLTY, KAWASAKI W650, KAWASAKI W400, KAWASAKI ESTRELLA
As a matter of fact
Installation is Large strange, but there is no doubt that it will be much cooler when attached. That is the best because the price is cheap. Recommended for Cafe racerCustom. View detail
Fits: YAMAHA TT-R50E, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
Zeta Zeter Engine plug
Even here, especially OEM, there is no problem, but I tried to replace it with a matter of just appearance.
There is no problem with installation and build, but after all the price is subtle "high" For this price you want the O-ring position to be attached.
I will assume that it looks good with Accent attached.
View detail
Fits: YAMAHA TT-R50E, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
Check before installation
It is a bonsai Parts, but it looks like it looks.
But as usual it is not even an O-ring even though it's expensive. O-ring etc. Since it is a cheap one, please come attached. Plugs and caps from other companies are almost almost attached.
I found it when I installed the OEMO-ring, but there was cutting powder adhering to the Screw part. It was quite large cutting Aluminum kusu, so installing without noticing it was a Damage to the Engine.
Laser print and other places are beautiful, but engine parts and cutting powders are poor finish.
View detail
Fits: YAMAHA TT-R50E, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
Easy to install
ZETA's Red is thin compared to DRC. I'd like to improve it because I like Red a bit darker. As for DRC.
As for installation it took less than 1 minute and was easy to wear.
View detail
For vehicle inspection ship Sticker
What are you guys doing? Are you clumsy, Seal gets dirty and it gets dirty Number.
So I used the KITACO thing in the previous car, but this one was cheap and I bought it.
View detail
It is only self-satisfaction Parts
For my Motorcycle it is a Parts that can be said to be the best Matching.
As Silencer and Rear inner fender are aligned with Twill Carbon, the existence of Rear brakes tank was floating.
However, by wearing this product, it is resolved and it seems that it got together in Design.
Although mostly satisfied, Edge 's processing was sweet, and it seemed to hurt your fingertip carelessly, so we did Edge processing with 400 and 800 File and mounted it.
In addition, since the photograph of the back side is also posted in my diary, I think that those who were worried can refer to that.
View detail
Fits: SUZUKI DR-Z400S, SUZUKI DR-Z400SM, SUZUKI DR-Z400 R 00-09, KAWASAKI KFX400(ATV) 03-06
Anyone can do it.
Easy to install, anyone can. I wonder if Engine has changed a bit. Unified with Change shift, footpeg and Red. Change shift is made by Hammerhead and it interferes with Engine Case. I will not take measures. View detail
It's as natural as OEM Product
Bare Meter harness - Cover protecting Cable.
If MT-09 is not installed with Screen installed, Cable under Meter is Dustetc. It will soon become dirty and will become White っ ぽ い. It is very troublesome to wipe Cable one by one even if you wash it.
So I wear this Cover. It is designed to tighten together with the Tapping screw behind Meter, it is designed according to the shape of Meter. The texture is Headlight coveretc. The same as Black resin, it looks like an OEM Product.
The difficulty is that it is just a resin molded item but it is a bit expensive?.
View detail
Easy installation, atmosphere up!
It is installed in ESTRELLA.
The feature of the largest Large is that it can be worn without Fender machining!
Body is a thick Gold matrix plate, it is sturdy enough to not be bent by hand. I am very satisfied that the texture of the paint is also high. Fingerprints are easy to attach.
When Fork stretched, when we hit Headlight, we installed on the front side feeling that there was a Review on WEB. I ran like a pass, but so far Large seems to be durable.
I attached it because I thought that I missed the Rubber molds that came with it. As the corner becomes Wrinkle, I think cutting is necessary by cutting it with Cutter and not floating. There is no double-sided tape for fixing the Rubber molds, so it is necessary to prepare.
The installation on Fender is Double-sided Tape. Do not forget to degrease when wearing. Tape is a very thin Sponge, so after wearing it seems to float slightly by its thickness, you may be worried if you are interested.
The adhesive strength of Tape is quite strong. There was no play even after driving on expressway or pass, and I felt that problems would not arise in normal use. Since the strength at the time of Tape deterioration is concerned, (Lightly touching) I think that it is better to carry out without fail. The Instruction Manual inspects every 100 km after the first time, every 500 km.
It's very easy to install and Recommendation as the atmosphere of Vintage gets much more. Decorating with Cutting sheet, Seal, etc. may be more attachment attached.
View detail
The best dish to enjoy the atmosphere
Among the similar products released from a number of companies, "No Fender Drilling Processing" "Double-sided Tape paste" The thing made by this DAYTONA.
That is the biggest cause I hesitated to me, and it is also the biggest reason I bought it.
I am worried about the reliability of Double-sided Tape, I was looking for a product of drilling Screw stopper, but there is resistance to punching holes in Fender. Considering rust and taste change, Motorcycle sale, this product attached without processing is appealing.
Although I also referred to Imsupu of Others, I heard that when I told the story of the person who was wearing it at Touring destination the other day, it took three years to install, but I am told that I do not have to worry with all the grafting. I actually confirmed the product, but it was solid. Just rust occurred in Bracket, but it will be managed somehow.
That's why I bought it without hesitation.
View detail
BLACK ON SILVER
I changed the Cap bolt holder of License Plate from Gold to Black.
The attached vehicle is Ninja H2.
Until now, I used Gold, but I chose to remake Black Balance with body color Miller coatBlack, I chose Black.
Although it is a private impression, the effect is as expected! Large Correct!
Silver of Cap bolt and Black of Holder matched, it became a good contrast Contrast, the Balance of the whole body was further improved.
Small Sana Parts, but the fine Balance stacking is Large off to Custom.
View detail
attachment
I bought Twill Weave Carbon because the Reserve tank was visible. Installation is very easy because it is Bolt-on. The price was a little expensive but I am very satisfied.. View detail
PetitDress-up ‥ ...
I bought it for Caliper's new opportunity.
The coloring of color is also beautiful and color is plentiful. You can always find your favorite color anywhere. As expected it is Mr. Kouten of Anodized.
Because explanation of hang of installation is polite and it attaches considerably to Well, it drops etc etc. There will not be worry of.
Quantity : 1 Set of 2pcs. So the fraction may end up, so if color preferences match, joint purchase with friends may be useless.
The price is as it is (Because it will be attached by anyone if it is too cheap haha) I think that it is perfect for casual PetitDress-up.
View detail
Unexpectedly large effect PetitCustom
I made PetitCustom with CF POSH Cap bolt holder.
The material of the product Body is Duralumin, and the color is beautifully decorated with Anodized Treatment.
Color is from Balance with car body color, Choice Black. Design is also simple, I like it very much!
Since the License Plate was previously installed with Cap bolt, we diverted it and replaced the Washer and Cap bolt holder.
Casual PetitCustom, but the effect is more than expected!
Duralumin is a type of Aluminum Gold, such as Aluminum and Copper, Magnesium etc., the proportion of Gold other than Aluminum is copper : About 4%, Magnesium : 0. 5%, Manganese 0. It's 5%.
Then, the applied Anodized Treatment is extremely convenient, electrolyzes dilute sulfuric acid, oxalic acid, etc. as a treatment bath and Aluminum as an anode, electrochemically oxidizes the surface, and forms a film of aluminum oxide By the method, it is resistant to corrosion and it becomes a hard surface, so it becomes high wear resistance.
In addition, coloring (It is not painting) It has the feature that it can be done. There are countless holes in the film made with Anodized Treatment, and if it is impregnated with dye, it can color while keeping the gloss of Gold genus. This is not able to do with any Gold genus, it is a special skill that only Aluminum can do.
* Plating's is not Anodized.
CF POSH Cap bolt holder has various colors, so do not you enjoy PetitCustom of your favorite color with your favorite color?
View detail
Two types of municipal mandatory vehicle liability insurance Seal
Since the two municipal License Plates are Small, since the misperception responses Seal overlapped slightly with numbers and fitting was bad, fitting.
It is thicker than I thought and the touch - It is perfect for texture.
Since Color and Bolt necessary for installation are also included, they are bought and installed immediately.
View detail
To decorate OEMExhaust pipe!
Purchase for unnatural OEMExhaust pipe decoration purposes.
Plating so dirt easily falls.
I changed it to the full exhaust system immediately so I have not used it for a long time, but in long-term use I also feel burned and rusted.
View detail
Looking at importance - -
Because the Rear brakes tank was visible, looking attentive Material : I attached Carbon's Brake tank Guard.
It was Black as the surroundings disappeared.
Mounting and screw holes were not mad and completed immediately.
View detail