Reviews
Good looking design
I used it to hide the screw hole of the Bolt that removed the Tandem Footpeg. View detail
To improve serviceability.
Since the other Cowl Fastener was not a D-Ring, I purchased the D-ring Fastener from CLEVERWOLF for improved serviceability.
As a result, it was not possible to use the Fastener because the diameter of the Fastener of the original cowl of other companies was larger than the Quick fastener that was purchased this time.
It turns out that it is rattling, and was informed here that there was size in Quick fastener, it was not able to use, but it is a good learning experience.
View detail
big
It's bigger and rougher than the different colors of the same product I bought before.
It arrived in a Vinyl bag, and I wonder if it's real?
I should have bought the CALI Plate from another company because other companies are starting to copy it.
View detail
Fits: SUZUKI DR-Z400S, SUZUKI DR-Z400SM, SUZUKI DR-Z400 R 00-09, KAWASAKI KFX400(ATV) 03-06
Good for One Point
I bought it because the paint came off of NORMAL and the base of Black became shabby. I chose Red to match the Anniversary color, GoldRed! View detail
As for Repair, I recommend it
I bought it for the Repair of Race cowl for Saitaniya R25
But Size seems to be small and it was not usable for the Cowl of Saitaniya
I think it can be used for any manufacturer's cowl if the size is right
You should check the Size before you buy
View detail
Thank goodness the M5 has been sold
In the old days, M6Size was the smallest size, so we can use it to make a small size
I've been diverting M6s for the M5 part as well
I bought it because I thought it was time for a change
If it fits, so does the Center
It's a surefire way to get out, and the Parts that have been with us for a long time
Because there was a lot of Wound out there
Replaced and Refreshing
View detail
Fits: HONDA MONKEY, HONDA SUPER CUB110, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA CHALY, HONDA DAX, HONDA CD90, HONDA CD50, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125, HONDA GORILLA, HONDA MONKEY, Others , HONDA SUPER CUB110ThailandMODEL, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA LITTLE CUB
One point・Accent
At the time of rear suspension replacement, I bought it to put red Accent I did I think the red color makes a nice statement for me! View detail
I'm all about high quality anyway!
If you use the Fender Eliminator Kit, you can use the Swing Arm The OEMBracket mounting holes are left in place, and it's not as if the You're out I chose Yoshimura's Boss Cap because it looks uncool
It is important to note that there are some bolts that have a similar shape, so make sure you choose the OEM bolts or else you'll get a It will not be fixed in place Also, the material:Because it is like an aluminum product, there is a feeling that the hexagonal hole is damaged when it is tightened with full force It seems to be good to apply Screw lock and fasten in moderation I am very happy with the quality
View detail
Recommended for those who have installed the Fender Eliminator Kit by YOSHIMURA
The Swing that I removed when I installed the Fender Eliminator Kit This is a product to plug the holes in ArmFender
Aluminum alloy cut-out for quality, color and appearance
The word YOSHIMURA is marked, so you can see the word "YOSHIMURA" This would be especially good for those who have installed the Fender Eliminator Kit
When installing the Swing ArmFender, the Bolt that comes out when removing the NORMAL Swing ArmFender is removed Use
Insert the product into the screw on the Swing Arm and put the above reused bolts from the back It is installed by pinching and tightening, but Sprocket interferes with the rear side I think it's a little hard to tighten the Wheel with it in place
I'm a Long Hexagonal Wrench with a balled tip, and putting it back together is a I applied a little bit of medium-strength screw lock to prevent it from coming off by vibration and tightened it up It was
When you install the Yoshimura logo, make sure it's in the same position as the other two
View detail
A little expensive, but I would recommend it to anyone who has replaced it with a Fender-less one
After replacing it with a Fender-less, I was concerned about the holes in the Swing Arm, so I bought it as soon as I could
I am satisfied with the beautiful finish, as expected of a Yoshimura
You can use the screws of the removed License Plate Bracket for installation However, because the screw on the Stem shaft side is narrower than the Sprocket, the A It was a little hard to close
View detail
I'm a bit extravagant
I put it on the license plate, but it was unexpectedly extravagant
It's surprisingly large and conspicuous
Can you get away with swinging a little more Small if you have something that is decorated with the Bolt itself? And
It would be a good Accent, depending on where you use it
View detail
Fits: BMW R1200R LC, BMW R1200RS LC, BMW R1250R, BMW R1250RS
I think it's good
I installed it on the R1250RS
It's a large quantity, but it's easy to install
It's a good thing that it's a low-Cost project
It's handy to have a plahan
The front of the Engine is tucked away
You can push it in at the handle
The fit feeling is also exquisite
View detail
Titanium is burning well
It's totally self-congratulatory Parts!
Size is M6×15mm P=1.0
I'm happy with the way the Titanium is burned, just the right amount of Large!
For those who like Titanium, it's Recommends (^o^)
View detail
Fits: HONDA MONKEY, HONDA CT125, HONDA MSX GROM, HONDA DAX125, SUZUKI Gixxer, HONDA GROM, HONDA SUPER CUBC125, HONDA SUPER CUB110ThailandMODEL, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA GORILLA, HONDA MONKEY
5
Installed on a SUPER CUBC125 2019 MODEL
You'll be more efficient in adjusting the Chain!
It made the process much easier
View detail
Fits: BMW R1200R LC, BMW R1200RS LC, BMW R1250R, BMW R1250RS
The construction is solid
Installation required a plastic hammer for some locations, but
The texture was quite good It is well attached and medium in appearance I would recommend it
View detail
Maybe it's not strong enough?
NINJA2 Helmet50Rsl Fender Eliminator by DAYTONA Installed in the Kit's license plate 。 After the second touring, the root of the Sticker Plate at home (Where it hangs on the body part next to the screw mounting screw about 1cm) Crack confirmed in Crack in the middle of removal (Not the part of the mounting screw) The Fender Eliminator may have a Large vibration View detail
Fits: YAMAHA TT-R50E, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
Just Looks UpParts
Changing the appearance of this product with UpParts will not improve performance
The OEM engine plug is a Large Slotted screwdriver with It can be removed, but I don't have one, so I used a $500 coin
It's easy to distort a 500-yen coin, but I was able to use it
View detail
Seem very big
I buy it because I change my number board and would like have something new. It is plain sliver color and very simple design so I love it and buy it to try. After I get it, I think this may be to large for my number board. So I still not yet decided to install it. Anyway, the quality seem good. Hope it will fit my board View detail
Perfect Deal
Perfect Service and Quality, Thank you, my monkey is very happy and is smilling now every day and night. I will order in the next few weeks any more parts, because the Service and the Quality is perfect. View detail
A little more welding Can't you make it a little more skillful?
When I took it out of its packaging "Whoa! It's ironic and martial, that's good!' I thought, but the welds are just as shown in the picture..
This is how it should be (?_?)
I don't have any welding expertise, but I'm a layman "What's this? What do you think?
There's a gap between us
The picture in the product description is the same, so I'm sure you can't return it
That's about it and I would like to ask Mr. We-Big to answer the day
As I said
I'll replace it (lol)
View detail