Reviews
with Reflector
Purchased because of the Fender Eliminator.
The Reflector is convenient because it can be installed along with the Number, since it would be poorly maintained without the Reflector.
The product itself is thick and sturdy, so it is unlikely to be bent only at the reflector attachment point when it is caught on the cover.
I think the price is a little high, but the color is good and the rigidity seems high, so it is not bad.
View detail
Fits: Others Universal
Yo...
Installed on the License Plate of Mrs. Rebel250.
I have pushed and pulled this product with it installed before and it went gasketed, but it bent with the License Plate, so I think it has no strength at all.
but purchased and installed again lol
This product is a little larger than the License Plate, and the main points of this product are that it is lightweight and can be easily installed. (´∀`)
Incidentally, when using the included anti-vibration sponge, the gap between the license plate and the panel becomes too large and the panel floats.
Overall, I think it is a good product for dress-up purposes.
View detail
I like the color.
This is my first ReturnRider in 8 years, but I have been using DRC mono for a long time, so this is a Repeat purchase.
I love the texture and color.
However, you should be careful not to widen the claws on the bottom side, otherwise the Wound will get into the edge of the License Plate.
(I actually inserted it without expanding it, and when I removed it, it had a Wound in it…)
Currently I am using only the color Washer and Bolt because they interfere with the Fender Eliminator Kit that I installed separately.
View detail
Fits: Others Universal
It was a little too flashy.
I bought this for Number protection and dress-up.
I imagined that the License PlateBody would fit in the body, but it was not quite large enough, so it stuck out. I had to put the attached cushion on it because it floated.
The frame itself is a bit Large, so in the case of Gold, it was an unfortunate point that it would stand out too much.
I think it is an Exactly product for those who like to be flashy.
View detail
Functional Parts for a Bland Bolt
[How is it used?
For fixing Bolt of License Plate of SEROW250 which is used for mountain play.
Just by replacing the inorganic fixing Bolt with this product, it will look better, and it can also be used as a Net fixing Hook for when you have a lot of baggage. Two for the price of one. PARTS.
Was the one you received as per Image?
I saw a friend's Motorcycle that had already installed this product when I didn't know it existed yet. What is this aluminum color that looks like a very small version of the Tezuga?" When I asked him about it, he told me that it was a product installed for the above-mentioned purpose, so I immediately took a crack at Ideas.
The product was as per Image because of such a process of purchase.
Was the installation difficult?
The difficulty level is low because all you have to do is remove the bolt that was attached to the License Plate and install this product, and I think that anyone can easily customize this part.
How was your experience with it?
Most of them are free dress-up parts, but they are used for fixing the Hook of Net for Motorcycle when we carry a lot of luggage with Motorcycle, which happens a few times a year or not.
It is seldom used for functional purposes, but it is useful when it is.
Well, it's a bit of a duplication. Color Anodized Aluminum Collar Dress-upSmall things.
[Included Parts:were they on?
As you can see in the picture, each color Aluminum Collar, Cap bolt (length is about 20mm?), Nut, Nylon washer×2 and 1 piece of Iron Washer are included. and Nut and Nylon washer×2 and 1 piece of iron washer is 1Quantity:Set, and itsQuantity:Two Sets are included in the package.
[Was there anything that disappointed you?
My friend who used it before me bought the Red one, but after about a year or so the Anodized staining faded and it became just Silver, so he painted it Red with plasticolor and dyed the hollow side line White (it was exactly the Image of Zunga).
Anodized light colors may fade quickly.
Other items that would be helpful
Point and hang of installation
Even though the collar is sandwiched, it is basically a fixed Bolt. "Tighten with the proper Torque." I don't think there is a problem as long as the
"Loose and falling off." If you are concerned about the "Mere Old Man", it may be a good idea to replace the existing nut with a Lock nut.
[Availability and clarity of the Instruction Manual
No Instruction Manual, as noted above. Bolt & Nut+α for fixing So no problem.
It can be used not only for fixing License Plate, but also for fixing M6Size, so it can be used in various ways depending on each individual's Ideas.
[Notes]
Not particularly
[ITEMS TO BUY TOGETHER
Basically, no.
Bolt & Nut, Aluminum Collar, and Washer in Quantity:The set is complete, so if the purpose is to fix the License Plate, this product is all you need.
[Opinions and requests to Manufacturer
2Quantity:Considering that the Set costs about 910 yen, I would like to request a more UV-resistant dye.
View detail
For vehicles registered as Class 2.
I installed this on my class 2 registered VINODELUXE and I think it is a must have for a class 2 registered moped. I am glad that the Triangle Mark Sticker is included so I didn't have to buy a new one.
The finish on the corners of the Holder is not good. I was also concerned about the weight of the Holder itself, but it might be good for durability.
View detail
slightly overcosted
Anodized finish is only on the cap part. The bolt included is a normal bolt.
Given this, it seems somewhat high.
View detail
Appearance Carbon
Quantity over FRP:Carbon board with 1pc.
Still, it serves well as a License Plate Holder, so there is no problem.
Glimpses of Material:Carbon Style is Fashion?
View detail
NumberKit
Purchased to install Japan Standard Number on an imported Fender Eliminator. It is thick and seems to be resistant to vibration. View detail
Fits: Others Universal
For reinforcing License Plate
Purchased before License Plate was bent.
Silver is refringing, but the overhang of the Plate is one turn (upper and lower Quantities).:Pair (for Left and Right) (about 2mm each) Large size looks like a large.
The anti-vibration sponge is too thick and the plate warps when the bolt is tightened. I shaved it thin and used it. The attached nut is a loosening stop, so I don't think it is necessary to use it.
The supplied Bolt was not long enough and was purchased at Home center.
View detail
Fits: HARLEY-DAVIDSON FLFB, HARLEY-DAVIDSON FLSL, HARLEY-DAVIDSON FXBB
I want to cancel it.
I want to make a cancellation, but there is no Cancellation item.
Please take a few minutes to complete the Cancellation procedure.
View detail
The edge is Beauty, but I'm worried about the gap.
I was looking for a moped license frame in silver and came across this one. The frame edge is beautifully made. The screws are a little difficult to fasten when installing the number because the sponge is a little wide. Also, there is a little gap at the corner of the Horizontal Type Number. It is a little bit of a gap at the corner of the Horizontal TypeNumber, but it is not noticeable when seen from a distance. The number screws are probably stainless steel screws, but they are made of a material that looks like a rusty nut. When completed, it has a beautiful, casual custom look. I am glad I chose this License Frame. View detail
It's bigger than NanBar size.
I was looking for a NORMAL frame, but I found this product and bought it because it was available for mopeds and 125s.
The other thing was that it was difficult to align and fit them together.
View detail
A little Size.
I bought it thinking it would be a little larger than the Number because it was for 50-125. Also, the pcx mounting bolt is a little short, so you may need to buy a separate bolt with the thickness of the plate. View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
Stylish License Plate Bolt
The License Plate Bolt was plain, so we installed this product.
The texture is good and will improve the appearance of the car body. You can also choose the color you want.
The installation nut is not included, so the original one must be diverted or a new one must be purchased.
It would be kind if you could include a flange nut with a non-turnover spec.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
things (which) may or may not exist
I bought Plate in Gold to go with it.
I like the variety of colors that are available.
There is nothing wrong with NORMAL Screw, so it is really self sufficient.
View detail
Fits: Others
Check Bolt's Size
I thought it was short because my Memo said M8x30.
I knew it was short…
The Black Dish Bolt with an intensity of 8 is in storage because it is not found anywhere else.
I wonder if the Color Washer has any use…
View detail
It's going to look good.
License Plate will look better.
Installation is as simple as removing the License Plate and reattaching it.
It also prevents Number from bending.
View detail
It's going to look good.
The Number stays in place and the helicopter doesn't bend.
There is an effect of putting it on.
It can also be used to add color and improve the look.
The reverse side of the Number can get pretty dirty, but with this on, the back is flat.
Easy to clean.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
A little high
I used it on my Blue metallic TRX850. When I bought it used, I used a Fender Eliminator to adjust the angle of the Number.
I've been wondering about this for a while now, so I replaced the bolt with a connecting bar.
I am satisfied with the way it looks. However, the screws are a little short, so it would be better if they were 3 to 5mm longer.
Durability is unknown
View detail