Reviews
![PREMIUM ZONE License Plate HolderQuantity:Set [M6]](https://img.webike-cdn.net/catalogue/images/15903/91946_1_TS.jpg)
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
Stylish License Plate Bolt
The License Plate Bolt was plain, so we installed this product.
The texture is good and will improve the appearance of the car body. You can also choose the color you want.
The installation nut is not included, so the original one must be diverted or a new one must be purchased.
It would be kind if you could include a flange nut with a non-turnover spec.
View detail
Fits: Others Universal
Could it be the lightest License Plate Holder?
Purchased to prevent License Plate from bending.
Although the License Plate Holder is extremely lightweight, the shape of the outer circumference seems to have been designed to ensure strength.
Therefore, it is considered to be strong enough to meet the needs. It is lightweight, so the increase in vehicle weight is kept to a minimum.
The Bolt included is excellent, and the anti-dropout type makes it safe to drive.
When installing the Bolt, it is recommended not to over-tighten the Bolt, as this will cause the License Plate to bend.
View detail
![PREMIUM ZONE License Plate HolderQuantity:Set [M6]](https://img.webike-cdn.net/catalogue/images/15651/91954_O01_TS.jpg)
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
things (which) may or may not exist
I bought Plate in Gold to go with it.
I like the variety of colors that are available.
There is nothing wrong with NORMAL Screw, so it is really self sufficient.
View detail
sufficient for one's needs
I bought this to counteract the fact that the Number was bent before I knew it.
I think it is a good measure.
I like that there are so many colors.
View detail
buying a new one (esp. a new one in the same store)
I bought the wrong size, and went straight to the purchase shop. 。 I bought a new one. View detail
Mounting Posh Cap bolt decorating License PlateMounting Bolt
Since the License Plate Mounting Bolt is not enough, I wanted to have something one point, so I purchased Posh's CapBolt & Nut Set for License Plate fixing this time.
As for the color, Gold was selected.
Reddit's Gold!" I have been using Gold as an accent on my motorcycle in some places, so I wanted to add Gold to the balance of my motorcycle.
Well - I think this will be the Sense of the buyer.
I think it is a self-satisfied attachment, but I am happy that I bought it and installed it.
View detail
Effective for vibration control of License PlateLarge
Used for KLX125.
Since the License Plate has been cracking due to vibration, I installed it for protection, but it seems to be stronger than aluminum and so far I have had no problems.
I think the quality is good with no unevenness in plating.
View detail
![Premium Zone License Plate Holder Set [M6]](https://img.webike-cdn.net/catalogue/images/15903/91945_1_TS.jpg)
Fits: SUZUKI GSX-S750, HONDA CBR500R, YAMAHA YZF-R3, HONDA CB500X, HONDA CB150R, HONDA CB300R, YAMAHA YZF-R25, YAMAHA XSR900, SUZUKI GSX250R, SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-R125, KAWASAKI VERSYS-X 250, HONDA PCX125, HONDA NC750X, HONDA CBR650R, HONDA CBR650R, HONDA CBR400R, HONDA CB650R
Easy and convenient dress-up?
I purchased this in adjustment to get free shipping on other products.
Installation is easy, just remove the original bolt and replace it with a new one.
I think it is good as One point.
View detail
Mounted on Large-type car Number
I installed it on my CB1300SB. The length of the License Plate Bolt is limited because of the Camera Holder.
Also, I think it depends on the NanBar size, but the corners interfere a bit.
View detail
Fits: Others Universal
License Plate does not appear to be broken or bent
Mounted on Rocket3gt
Although the motorcycle does not vibrate that much, I bought it to protect the License Plate that was directly attached to the vehicle body.
I think I made a good purchase as it is very lightweight and will serve its purpose discreetly.
The License Plate standards have become stricter, but the fact that it also conformed to those standards is also highly commendable.
However, it is almost the same size as the License Plate, so it is not obvious at a glance that it is attached.
I don't think it will serve the purpose of dress-up or adjusting the angle of the Number.
My only regret is that I felt the price could have been a little lower.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Simple and high texture
I was looking for a number base to prevent blurring of the License Plate, but since it is not for decorative purposes, I wanted something as inconspicuous as possible, so I chose this one. I chose this one because it is thick enough to be solid and not visible from the surface at all. View detail
Very light.
[How is it used?
Reflector mounting section is used to install the company's moped two StickerBracket.
Since the reflector is not used, a commercially available plate is installed to cover the hole in the mounting area.
Was the one you received as per Image?
It's just that it says "lightweight," and it's meatless.
It is lighter than the one I used before.
Was the installation difficult?
Long holes are machined for easy position adjustment and installation.
How was your experience with it?
Lightweight but good without Chatter sound.
[Included Parts:were they on?
License Plate Bolt is also included, but
I am replacing it with a Torx bolt from another company.
[Was there anything that disappointed you?
None in particular
View detail
It is not a dress-up, but it increases the rigidity of the number.
Unless you use a Fender Eliminator, this License Plate Holder is the same size as the local number, so you can't see it at all, so I chose Black.
I bought it because there is no other product exclusively for local numbers, but it is perfect because I bought it as a reinforcement for the backing.
The purpose of purchase is to cover the back of the Number from mud splashes and chain oil splashes, and to protect it from bending.
View detail
Fits: Others Universal
The best product for Number protection
[How is it used?
Used for 400X License Plate
Was the one you received as per Image?
It is exactly as pictured.
Was the installation difficult?
Driver and Wrench are all that is required for installation.
How was your experience with it?
It's definitely a product I see a lot of on a regular basis.
[Included Parts:were they on?
Sponge is attached for cushioning between Body and Plate.
If you apply it properly, the number will be attached in a curved state, so please apply it with a little thought.
[Was there anything that disappointed you?
It is cheaper than other similar products, but it would be easier to buy if it were a few hundred yen cheaper.
View detail
Seeking to hide bracket and increase texture
Purchased to conceal Number mounting Bracket.
It was not completely hidden, but it was better.
The product is not as shiny as I expected.
be on the verge of tying the number Claws. should be spread out and then put Number between them.
I feel like I'm getting a little old-fashioned, but it's cheap. Well, okay." I feel like.
View detail
Fender Eliminator
I bought a Fender Eliminator, so I decided to change the Bolt as well.
I had a Torque tool at home and didn't have to buy a separate Nut, so I would recommend it to anyone in that condition.
If you're buying a tool just for this, I think you'd be better off with another Bolt.
View detail
Reinforcement
I had bent a License Plate once, so I installed it for reinforcement purposes, and it worked perfectly.
I used double-sided tape and laminated it with Number, and so far it has not peeled off.
View detail
Fits: Others Universal
Solidly built
I didn't want the License Plate to bend in any way, so I installed it as a counter piece.
It is well made and secure.
It's not cool if the License Plate is crooked.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
In the Accent of License plate
Instead of the tasteless Hexagon Bolt, we tried to match the color of the car body.
There is no Hook function, but I think that's OK.
However, it may be a bit expensive.
View detail
It is completely the world of a self-satisfaction. It attached, although he thought that it was somewhat expensive.
It is completely the world of a self-satisfaction.
It attached, although he thought that it was somewhat expensive.
View detail