Reviews
A Little Fashion
Since OEM Bolt is lame (lol),,,, it is a bit Fashion. View detail
Fits: Others Universal
I'm glad I bought it
I purchased this product because someone hit my Number and bent it. It was a good purchase, thinner and more solid than I had imagined.
It was easy to install.
View detail
NumberKit
Purchased to install Japan Standard Number on an imported Fender Eliminator. It is thick and seems to be resistant to vibration. View detail
For Customization around License Plate
I have been using it for a long time for customization and to prevent cracks from entering the License Plate hole since it holds a wide range of License Plate holes.
(The models in the photo are 2022 RIEJU MR250 Racing and Tango250 because they were the only choices available in the system.)
View detail
![[K-CON Pro] License Plate Base](https://img.webike-cdn.net/catalogue/images/69385/0901-657-00050b0_TS.jpg)
ExactlySize
License Plate and ExactSize Plate
Unobtrusive, but that's what I like.
View detail
ตอนนี้ได้รับแล้ว รอไม่นานถือว่าไวมากๆ สั่งมาหลายรอบแล้ว สินค้าตรงตามสั่งทุกครั้ง ไม่เคยมีชิ้นไหนชำรุด หรือ เสียหาย สวยงามมากๆ ยิ่งใส่กับผฝแผ่นป้ายทะเบียนญี่ปุ่นยิ่งลงตัวมากๆ ราคาถูกกว่าที่อื่นเยอะเลย โดยรวมถูกใจมากๆ เดี๋ยวสั่งของเรื่อยๆๆแน่นอนครับ View detail
Solidly built
I haven't installed it yet, but I think the texture and look are great.
It seems to be sturdy and does not seem to have any flapping.
View detail
Fits: Others Universal
For reinforcing License Plate
Purchased before License Plate was bent.
Silver is refringing, but the overhang of the Plate is one turn (upper and lower Quantities).:Pair (for Left and Right) (about 2mm each) Large size looks like a large.
The anti-vibration sponge is too thick and the plate warps when the bolt is tightened. I shaved it thin and used it. The attached nut is a loosening stop, so I don't think it is necessary to use it.
The supplied Bolt was not long enough and was purchased at Home center.
View detail
FeedSportsLicense Plate Base
I bought it to see if it could be installed on my R1250GS, but it was possible to install it with only a little interference from the reflector.
The Rear area is Fashion and Refreshing compared to OEMPlateBase.
View detail
Fits: Others Universal
To prevent the License plate from bending
I bought it to prevent it from getting caught on the License Plate when applying the Cover.
It's a small thing, but it's also a dress-up.
View detail
Compliance with new regulations provides peace of mind
Due to changes in the law, the installation method used to be [Color] Since I could not clear it, I purchased a POSH License Plate Holder and a Number Fixing Bolt. This will help me to comply with the stricter labeling rules. [Color] The number fits nicely without any fluttering, and the dress-up effect is outstanding despite being a simple part. View detail
New regulation compliant product
Strict License Plate Labeling Rules Made Stricter by Revised Laws [Color] The clear surface gives a sense of security. It is a simple part, but it also has an outstanding dress-up effect. I recommend this product. View detail
Installation in conjunction with RearFender cut
CROSS CUBFJ60 I installed this product because I lost the triangular mark due to the rear end cut of the Rear Fender of the "Rear Fender". View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
You should definitely buy it!
When I bought a motorcycle, I immediately ordered this product to protect my License Plate. (^ ^) View detail
Fits: HARLEY-DAVIDSON FLFB, HARLEY-DAVIDSON FLSL, HARLEY-DAVIDSON FXBB
I want to cancel it.
I want to make a cancellation, but there is no Cancellation item.
Please take a few minutes to complete the Cancellation procedure.
View detail
Fits: Others Universal
For those who want to wear a Slim Reflector.
ReflectorSince even a Single Body costs about this much, this price is inexpensive for a Number pedestal and a discreet reflector.
The Bolt is also inconspicuous, and the look and feel of the Bolt is much more stylish.
View detail
![[WALLESS] Aluminum License Plate Base Plate](https://img.webike-cdn.net/catalogue/images/59796/wls-001_01_TS.jpg)
For those who want to casually prevent License Plate cracks.
Purchased for W800 License Plate vibration control.
The thick aluminum plate is effective in preventing cracking of the Number without resonance.
Since it is the same size as the License Plate, it does not protrude from the License Plate when installed, and is recommended for those who do not want to look like they are installing a frame.
When looking at the License Plate from the Rear Fender side, the reverse side of the License Plate can be seen, which can be covered by the Plate.
View detail
Fits: Others Universal
Care must be taken during installation.
Motivation When I bought a new motorcycle, it was delivered with the License Plate installed as it was, so I bought this to prevent the License Plate from being bent when I put on the Body Cover, etc.
Accuracy, texture, etc. I am satisfied with the accuracy of the Large change. The back of the License Plate looks unreliable at first glance due to its light weight, but there is no problem at all.
Difficulty of installation It is very easy. The only thing to note, however, is that there is a thick rubber between the Number and the body, which is attached to the body as an anti-vibration measure. In other words, the gap between the License Plate and the Body is quite large, so if you tighten the screws without paying attention to the gap, the Number will be bent. It is recommended to tighten the screws little by little while checking the installation condition.
【Review】 It is highly accurate at an affordable price, and is highly recommended.
View detail
Fits: BMW RnineT, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Pure, BMW RnineT
Fit feeling is okay I guess.
RnineT Pure is now a Fender Eliminator, and the Japan License Plate goes on it with no problem.
The English version of the Instruction Manual (mostly photo explanations) makes installation easy.
However, the quality and texture of the joints with the RearLamp are not quite right, so I would rate the quality and feel of the product as dry.
View detail
Special shape
It is sufficient as a PlateHolder.
I can put a triangular Mark on the moped type 2 where it sticks out.
View detail