Reviews
Fits: SUZUKI GSX-S750, HONDA CBR500R, YAMAHA YZF-R3, HONDA CB500X, HONDA CB150R, HONDA CB300R, YAMAHA YZF-R25, YAMAHA XSR900, SUZUKI GSX250R, SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-R125, KAWASAKI VERSYS-X 250, HONDA PCX125, HONDA NC750X, HONDA CBR650R, HONDA CBR650R, HONDA CBR400R, HONDA CB650R
Red is good for PinkNumber
Purchased Red for my moped2 PinkNumber because I thought it was a good choice for my moped2 PinkNumber.
I am satisfied with it just as I imagined.
View detail
Gorgeous because of its color!
We replaced it incidentally when adding a Hook around the License Plate area.
The Torque bolt has a flat plate screw head, low volume, and a thin aluminum tray for a clean look. The aluminum tray is also thinner and looks more stylish, whereas a normal bolt looks rugged.
You will need a T30 Torque to install it, but it is not included with the product. It would be a waste to buy it just to install this, so we recommend checking to see if T30 is available beforehand.
View detail
Paint is weak
The paint feels weak. The color is beautiful, but the paint is weak and even the slightest thing seems to scratch it. View detail
Material:Lighter than Aluminum and installed.
[How is it used?
Material:This is a replacement for an Aluminum Holder.
Was the one you received as per Image?
The design is good like ZETA and fits ADV160.
Was the installation difficult?
License Plate BoltQuantity:It is only a 2pc detachment.
How was your experience with it?
Material:Since it is plastic, it is lightweight, which will reduce the burden on the mounting area.
[Included Parts:were they on?
Bolt set is included.
[Was there anything that disappointed you?
Not particularly
As with all ZETA products, Sticker's Quantity:I think it would be nice if you could add at least 1 pc.
View detail
Fits: Others Universal
Not only does it protect the License Plate, but it also looks GOOD!
[How is it used?
It is installed under the 250ccMotorcycle License Plate.
Was the one you received as per Image?
It was very nice!
Was the installation difficult?
A Hexagonal Wrench and Spanner are all that is needed for installation.
How was your experience with it?
I like it very much.
[Included Parts:were they on?
Four Seals for vibration isolation and Attachment for Bolt and Bolt were included.
[Was there anything that disappointed you?
Not particularly
View detail
It's normal
Can be installed normally.
However, I think it would be troublesome to clean it if it gets dirty.
View detail
Anti-theft and dress-up
I use it on all three of my motorcycles. It is a good anti-theft measure and also has a dress-up effect. Highly recommended. View detail
For vehicles registered as Class 2.
I installed this on my class 2 registered VINODELUXE and I think it is a must have for a class 2 registered moped. I am glad that the Triangle Mark Sticker is included so I didn't have to buy a new one.
The finish on the corners of the Holder is not good. I was also concerned about the weight of the Holder itself, but it might be good for durability.
View detail
Fits: Others Universal
in a fashionable way
[How is it used?
Installed on Yamaha's WR155R.
Fender Eliminator is installed, and since GIVI Bracket is installed, the Blinker is relocated to the Number.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is co-tightened with Number, so it can be installed immediately.
The Frame is attached to the Sponge like a vibration, but the Number is placed on top of the Sponge, so the Number is not completely covered by the Frame, but is attached to the Image as if it is floating.
It does not seem to offer that much protection in the event of a fall.
How was your experience with it?
Stylish and good.
Reflector is also included, so no need to retrofit. Good shape.
[Included Parts:were they on?
Sponge
[Was there anything that disappointed you?
I want to feel more protected!
View detail
Unobtrusive Parts but does a good job
This one was selected because it had a Crack along the Mounting Bolt on the License Plate due to vibration.
There are various shapes of number brackets, but this one is shaped to perfectly enclose the license plate and has claws to stop it from slipping, so even a somewhat deformed number will be held firmly in place.
It is also nice to be able to choose a color that matches the car body.
View detail
รองป้ายพลาสติกทะเบียน kn ใส่แล้วดูดี View detail
self-satisfaction
Good Items to casually assert YOSHIMURA View detail
Even with the lights on, the car will still hit you regardless.
I installed a DriveRecorder.
I was looking for something to put on a staker and found this product.
Stickers, once applied and removed, leave tanning marks or glue, or they naturally flip off.
Plate can be removed without leaving any scratches or stains.
[Thoughts
Cars that are going to hit you will hit you regardless of whether you have the lights on or not.
Probably a driver of such intellectual Level that he can't even read the Alpha bet.
So, translation (it might be better if you type it here!)
The License Plate Light is visible at night thanks to the License Plate Light (the Camera on the DVR is not visible).
It's just for decoration.
The car that runs into the Motorcycle is probably not even aware that the Motorcycle is in front of it in the first place, so it's not a good idea to be on the lookout for it. (Lol)
I don't blame Minus stars for saying this, but I feel the price is too expensive for the product.
Well, it's not a product that can be sold in large numbers, so it's no wonder it's so expensive.
View detail
slightly overcosted
Anodized finish is only on the cap part. The bolt included is a normal bolt.
Given this, it seems somewhat high.
View detail
Fits: Others Universal
License Plate Holder
The unrefined License Plate becomes stylish,
I am satisfied.
View detail
Fits: DUCATI , DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, BMW , KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR KRT EDITION
Light CarbonLicense Plate
AELLA is very polite, and you can download a PDF file of the full-size drawing to check if it can be attached to the License Plate Base.
Thanks to this, it was possible to install the license plate without drilling a hole for the license plate base, etc.
However, it was necessary to note that the Bolt length to the License Plate Base is not Penetrating Bolt hole. 。
Bolt length 10-12mm was ?? and 15mm was ?.
View detail
The Bolt on the License Plate was about to rust.
The bolt that attaches the number seemed to rust, so we changed it to this TorqueTaperBolt & Nut Set.
I chose the color Silver so that it wouldn't stand out too much, and I'm glad I did, because it looks OEM-like, just as I wanted.
And, since our vehicle has a driver's recorder bracket that is co-tightened, the bolt length was a little longer than other products, but the thickness of the bracket was just barely sufficient to allow installation.
I have no problem with normal installation, but would have appreciated another 2mm or so longer.
The bolt installed on the car at the time of delivery is prone to rust, and it has a large area to prevent tampering? The Bolt installed on the car at the time of delivery is susceptible to rust and tampering, and has a large area to suppress the Number, so depending on the type of car, such as a single cylinder, the Number may be less likely to crack due to vibration? It may be.
View detail
For additional Helmet mounting location
Purchased Helmet to attach it to places other than Mirror.
Installation is very easy.
Simply remove the Bolt from the Number and attach the PlateHolder together with the Bolt.
There is no need to add any other Bolt or Screw.
Anyone can install it in 5 minutes.
This time, I installed it on YOSHIMURA's Fender Eliminator Kit instead of OEM Fender,
No glitches or problems at all.
Also, I installed it with the supplied bolt, but other License Plate Bolt should be no problem.
I think
The construction was quite solid, thicker than I expected and Firmly.
The surface finish is also Beauty.
Helmet holder is Quantity:Pair (for Left and Right) Either can be attached.
Easy to remove and install.
The key part is a bit weak due to pushing, but that's about it.
It's not so much to prevent theft as it is to keep the Helmet on when you leave the Motorcycle for a while.
I personally don't care about it because it is the thing of the
I also installed a Holder on the SIDE of the car, but when the Exhaust System hits the car and it is immediately after running, the Holder is not installed.
It was a little difficult to use, so it is nice to be able to put it on without hitting the Exhaust System.
However, it does hit the Tire a bit, so those who are concerned about sogginess may need to take some measures.
Also, if you are in a windy place, the Exhaust System will sway quite a bit and hit the Exhaust System, so be careful there as well.
The supplies do not stand out as a Custom in appearance.
But the installation is easy and useful.
On the other hand, because it is inconspicuous in appearance, it is not so conspicuous in Styling and Silhouette.
It's good for people who don't want to change.
If the price were a little lower, the cosmetics would be perfect.
View detail
Appearance Carbon
Quantity over FRP:Carbon board with 1pc.
Still, it serves well as a License Plate Holder, so there is no problem.
Glimpses of Material:Carbon Style is Fashion?
View detail
Used instead of Fender
Fender is cut and used in Fender city because it splashes a lot.
There is a big difference between having it and not having it.
View detail