Reviews
Mounted on PCX160
I bought this to protect my license plate and dress-up my new car.
I had to widen my nails to get the Number in when I installed it, but other than that it was fine and took about 10 minutes to install.
The texture was also Matte pearl and luxurious.
The Plate will make it stronger and prevent the Number from being bent by mischief.
I didn't use the supplied Bolt stuff, I bought it separately.
View detail
Is good
It is inexpensive, but the accuracy is good and the quality of the plating is fine. There is no sense of existence than I thought in a good sense after installation. The point that I want to improve only one is to pinch the lower side of Number. Claws. This is the sharp edge. Since this is a sharp edge, it would be 100 points if you could refine it to a chamfered shape, but since it's plating, you can't sand it yourself. (Rusty) So.... View detail
To prevent the License plate from bending
The Fender Eliminator prevents the license plate from being bent, and the license plate part that can be seen directly from the back is material.:The body is made of FRP, so it is very light and strong. View detail
![PREMIUM ZONE License Plate HolderQuantity:Set [M6]](https://img.webike-cdn.net/catalogue/images/15903/91947_1_TS.jpg)
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
It will look Gorgeous.
The bolt that comes with the DMV or license plate is a steel bolt, which is not treated well, and rust will appear soon. The stainless steel bolt has a very custom look and is resistant to rust. View detail
The rear area becomes gorgeous.
It's a simple customization that makes it look gorgeous with just a change in the license plate mounting bolts. View detail
I like the design
The license plate holder I had installed before was deformed, so I decided to replace it with this type.
With Hole to reduce weight.
It's a shame that the vibration-reducing Pad wasn't included. (*_*)
View detail
Lightweight and neat looking
I replaced it with their Fender Eliminator Kit.
Lighter weight around the rear, LED blinker, and
I installed it to make it nicer.
Together with the Fender Eliminator, it's probably 1kg lighter.
The Aluminum Anodized Black used is beautiful and
The base plate has the minimum area and thickness required for rigidity.
Blinker has recently released a Small Type as well, but
This one is almost the length of the license plate.
It doesn't feel different.
The following are some notes and improvements, though not drawbacks
You should be careful about the side bag itself because it will interfere with the side bag of Company T when you install it.
Blinker's Wiring is laid bare.
The part coming out of the blinker body that needs to be sealed is
You may not have to worry too much about it. (I don't know, but it could be an internal countermeasure.)
WiringLayout asks for Sense, and
It sounds difficult, but I hope it will be improved somehow, in a good way.
We did not use the supplied resistors and replaced the Relay to deal with the problem.
The picture of the wiring explanation is hard to understand. I wanted one simple circuit diagram to be attached.
View detail
![Premium Zone License Plate Holder Set [M6]](https://img.webike-cdn.net/catalogue/images/15903/91945_1_TS.jpg)
Fits: SUZUKI GSX-S750, HONDA CBR500R, YAMAHA YZF-R3, HONDA CB500X, HONDA CB150R, HONDA CB300R, YAMAHA YZF-R25, YAMAHA XSR900, SUZUKI GSX250R, SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-R125, KAWASAKI VERSYS-X 250, HONDA PCX125, HONDA NC750X, HONDA CBR650R, HONDA CBR650R, HONDA CBR400R, HONDA CB650R
It's not bad, but...
It's a solid product, not a bad one.
When I installed it, it stuck out too far from the side.
A little bit of Parenthesis bad...
View detail
It's definitely fashionable.
It's a great way to dress-up casually at One Point.
But this price is so high!
Well, it's not a product that's out of shape or anything, so if it's cheap on sale or something, I'd buy it.
View detail
To Dress-up in Number.
You can dress-up your license plate easily.
If you add stickers and three-dimensional emblems to the edge of this, it's easy to give it a custom look.
However, since it's plastic, you have to be careful when tightening it with screw, otherwise it will crack if you tighten it too hard. (Lol) 。
View detail
It's a bit pricey.
I couldn't get a similar product from MADMAX, but that's when I found this one.
color is "Blue" "Red" "White" You can choose between the two. (There seems to be a product that can be switched with Relay, which is a higher-end product.
I connected to License Plate Light's Wiring, but it's only a +- wiring. "Select Red, TailWiring. You can play a lot of things such as
The product comes in two parts:the LED part and the Acrylic Plate, which can also be purchased as repair parts.
View detail
It's only a License Plate Bolt.
I've been thinking for a while that Bolt fixing the Number was Parenthesis bad It's steel, so if it rusts it's the worst. However, I had never thought about replacing it before, but this time the grommets Once I got hooked on Custom and started obsessing about it, even this one started to bother me.
So, I knew there were a lot of people out there thinking the same thing! There are Parts that properly cater to those feelings. We-Big had a variety of DesignBolts for license plates. They have some weird Mark's bolts, but they have a beautiful anodized color. The stainless steel cap bolt and stainless steel lock nut are used to stop it. I thought this product was very good, and it comes in several different colors. If you're cool with it, you can't say it's expensive for just this, but, well, these parts are. I think we should be thankful that we are prepared in advance.
I'm Grom Dress- in BlackRedGold Germany Flag Concept Since we're moving up, the obvious choice is Gold, because Anodized Finishing's The shape and texture of the color are good. As far as fitting into Plate...well, there's no way around it!
It's easy to install, of course, and it's prepared for Number, so it's easy to adjust the length of the bolts and so on. It's a perfect fit. Now look at the pictures. Does it have a presence? No? This is also an expression of love for your car, after all. It's not about what other people see, it's about creating your own personal vehicle, not just here and there, but also here and there. I think it's the joy and pleasure of creating.
View detail
It's pretty good.
Just remove the Number and attach it.
It comes easily.
The texture is such that this is what it is for the price.
I think it would be better if the rim was a little narrower.
Minus this one point.
It doesn't help that the Bolts tend to loosen up due to vibration.
This is a car model issue.
We are dealing with this by using a double nut.
View detail
Fits: Others Vehicles over 126cc
It's refreshing
Blinker seems to melt because the Slip-on Silencer used is quite up type So I bought it, I didn't use Ceramic resistors, but Relay to OEM Harness The White Wiring for resistors was used by connecting it as it is because the thing that seems to have been attached to it was used I used Vinyl Tape and wrapped it around Harness without connecting the View detail
Ideas product!
It was installed as a decorative plate on the reverse side of the License Plate
The Number's reverse side looks tighter now that I've installed it!
The product itself was a little distorted, but if you co-tighten it to the back of Number, there is nothing wrong with it
View detail
Red fades
I think it's nice and simple to look at, and since it's Torque, it's also petit security!
I don't think I'd recommend red because it's getting more and more faded
Black or something like that would be good
View detail
Parenthesis is good
This is a product category that tends to be neglected and has a high price tag
You'd be hard pressed to find anyone wearing them
He is unique and has good looks with good sense
I don't care if it's a single car, like the Manufacturer's Jimmy that sells EG It also fits single cars and other vehicles
It is such a product
View detail
You don't have to be a Fender Eliminator to be cool
I installed it on my New Model Katana
Expensive Attachment, so the Suzuki:SEA BASS License Plate Lock Bolt Set Item Number ： It was installed together with 99000-990Y7-A02
It's a pretty thick and solid product, and the cut area is nicely finished
[Was there anything that disappointed you?
Nothing in particular, but YLineCut is naturally not visible when Number is installed
Do you have any wishes or improvements you would like to make for the Manufacturer?
It's quite thick at 3mm, but if it's a matter of rigidity, could it be made 2mm and no meat removal? It could be a CostCut, too …
[Do you have any products to compare it to?
Material:Various PlateHolders in Aluminum
What made you decide to buy?
Impression of this product
It is a longtime seller and has a good rating, so I didn't hesitate to buy it
How was your experience with it?
The Yoshimura logoSilkscreen shines casually
Speaking of SEA BASS, if you are a Yoshimura fan, you will be satisfied with this product
There is no sense of discomfort when used in conjunction with the KATANA OEMOption's Carbon parts
Was the installation difficult?
The exchange itself is easy to do with just Spanner and Hexagonal Wrench
But I didn't know how to install the lock bolt and finally asked the Pro Shop to install it It was
【Please tell me the installation point and hang】
New with OEM Swing Arm, not Fender Eliminator When you install it in ModelKATANA, you need to put the bottom part of the license plate holder There is no need to remove it
[Was the Instruction Manual easy to understand?
No Instruction Manual is available
[Included Parts:were they on?
YOSHIMURA Sticker is included in the package
[Others]
tYPE-B with Reflector seems to have been discontinued
View detail
This part is a good one for the cheap
I bought it to protect Number on MONKEY
The Number is already a little warped when the motorcycle is put in and out of the garage In the meantime
Modified and installed
It is a little heavy, but I am satisfied with its cheapness and simplicity
The claw that inserts the bottom of the Number seems to be tight, but if you put a little force, it will go in
But after you plug it in, you can use Quantity:Pair (for Left and Right) The Gap adjustment of the
You may want to plug it in
PlateHolder and Number Quantity:Pair (for Left and Right) I guess I shouldn't care about the difference in the gap between
View detail
XG250 TRICKER must be modified to fit!
I bought two of them to help me digest my limited time points
I was going to install it on the XG250 TRICKER and MT-03, but the XG250 The TRICKER could not be installed because there was not enough space on the upper side of the Number
I installed it on MT-03 and T-Racer
I chose Black as the color, so it looks almost the same from the back
When you look at it from an angle, the silver-colored Number back side is black It feels tighter because it's there
I made it black so the chain oil splatter is less noticeable
View detail