Reviews
Fits: YAMAHA XJR 1300 SP , YAMAHA XJR 1300 C , YAMAHA XJR 1300 , YAMAHA XJR 1300 , YAMAHA XJR 1300 , YAMAHA XJR 1300
miscellany (classification of Japanese poetry unrelated to the seasons or to love)
The painting is messy, too messy.
The quality was shitty because it was crumbly, there were multiple areas where paint was not applied, and those areas were rusted.
To be more specific, if you've ever painted yourself, you know that you hang the paint on a gold needle and blow it, right?
The area where the Gold needle was hitting was not painted in its entirety.
In addition, there are some areas where the paint was too viscous and the substrate was not fully covered.
They are not spraying the paint, but rather taking it out immediately and shipping it without inspecting it properly during the process of submerging it in the paint pool.
Furthermore, it was not the License Plate Light in the product image, but a very small LED.
The shown image is only for reference.. It may differ from the actual product." I often say that, but I feel a bit cheated when I see the difference.
Maybe the Spec. has changed.
However, if you are going to put a picture of it installed on a real car as a product image, I think you should sell the same product.
I wonder if this kind of thing is allowed overseas.
If I sold this in Japan, I would get a storm of rejections and re-calls.
View detail
It is not possible without fail
License Plate Protection
I put it on to prevent tampering.
I chose Silver as my color.
It was safe, neither impossible nor impossible.
View detail
Looks good, but has BALI, so be careful when working with it.
The size and thickness of the plate was just right. It seems to be strong enough that there is no bending by vibration. I think that it is good because I can secure appropriate visibility by turning it inside out and attaching it according to the type of car because it is angled against the License Plate attachment surface.
What I was interested in was the BALI on all corners of one side. Although it was painted, the aluminum of the base was visible because of the BALI. In some cases, I thought that I might cut my hand. When I installed it, I shaved off the BALI and repainted it.
The finish is a bit poor for the price. It's a shame because the machining itself is well dimensioned...
View detail
Note the Size of the License Plate
I bought it in S Size for mopeds, but I didn't know that there are 170mm×100mm wide and 200mm×100mm long even for mopeds.
In Ehime Prefecture, because it was 200mm×100mm in width and 100mm in length in Square Type, this product could not be used because Size did not fit. 200mm×100mm in width and 100mm in length in DAYTONA seemed to be only trapezoidal Type, so Square Small Number Plate Holder Type2 of CFPosh was bought again. Because there seemed to be only trapezoidal Type in DAYTONA, I bought again the Square Small Number Plate Holder Type2 of CFPosh (horizontal 200mm× vertical 100mmSquare Type). The Size and the shape (Square Type, trapezoidal) of the Number seem to be different according to the region especially for the moped.
I think it is the thing as expected if the size is right. The PlateHolder of DAYTONA is working well for another motorcycle (250CC).
View detail
Fits: Others Universal
I am satisfied
I'm a Motorcycle push-around.
I used to bump the license plate a lot.
I bought it for protection.
The Fender Eliminator Kit does not have a Reflector.
Select "with Reflector" MODEL.
The product consists of the Body, Mounting Bolt and a noise suppressor.
Anti-vibration Cushion (Cut already) is included.
View detail
![FENDER LICENSE PLATE MT [DS-720814]](https://img.webike-cdn.net/catalogue/images/35311/DS720814_TS.jpg)
Fits: HARLEY-DAVIDSON Road King Classic EFI FLHRC, HARLEY-DAVIDSON 1200 Electra Glide FLH, HARLEY-DAVIDSON Low Rider FXSB, HARLEY-DAVIDSON Sturgis FXB, HARLEY-DAVIDSON Sportster 900 XLCH, HARLEY-DAVIDSON Sportster 1200 XL 50, HARLEY-DAVIDSON Super Glide EFI FXDI, HARLEY-DAVIDSON 883 Hugger XLH, HARLEY-DAVIDSON Softail Fat Boy EFI FLSTFI, HARLEY-DAVIDSON Softail Fat Boy EFI FLSTFI, HARLEY-DAVIDSON Fat Boy S FLSTFBS, HARLEY-DAVIDSON Street Bob FXDB, HARLEY-DAVIDSON 1200 Fat Bob FXEF, HARLEY-DAVIDSON 1200 Roadster EFI XLR, HARLEY-DAVIDSON Super Glide FXD, HARLEY-DAVIDSON Sportster 1000 XLCH, HARLEY-DAVIDSON Super Glide II FXRS, HARLEY-DAVIDSON 1200 Low Rider FXS, HARLEY-DAVIDSON Low Rider Custom FXLR, HARLEY-DAVIDSON Super Glide Custom EFI FXDCI
It's a nice angle.
The NORMAL looks better with the license plate facing a little bit at an angle while the license plate is right angle. It's not a bad angle for vehicle inspection and the visibility of the plate from the rear is not bad at all. View detail
![Premium Zone License Plate Holder Set [M6]](https://img.webike-cdn.net/catalogue/images/15903/91945_1_TS.jpg)
Fits: SUZUKI GSX-S750, HONDA CBR500R, YAMAHA YZF-R3, HONDA CB500X, HONDA CB150R, HONDA CB300R, YAMAHA YZF-R25, YAMAHA XSR900, SUZUKI GSX250R, SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-R125, KAWASAKI VERSYS-X 250, HONDA PCX125, HONDA NC750X, HONDA CBR650R, HONDA CBR650R, HONDA CBR400R, HONDA CB650R
Anodized is strong.
It's just a nondescript decorative Bolt.
The Bolt is used to sign the License Plate, so it will have no effect on the performance of the MotorcycleBody.
I've been putting it on vehicles that have been stored outdoors for more than a year without Cover, and surprisingly the red color of Anodized doesn't come off.
Anodized in this kind of vivid color will fade pretty quickly, but as expected of Daytona, it's made by Daytona.
View detail
Fits: Others Universal
REBEL250 (2020) It's used in...
This Plate fits fine.
But it's just not a good match for the REBEL250...
The REBEL 250 is equipped with vibration-reducing rubbers in three locations.
This is the part of the Bolt stopper and the lower middle part.
Instead of the rubber in the lower middle supporting the frame, it goes directly to the Number from where the meat is removed.
Also, Number itself may play a role in Fender?
The number of New Model is set on the lower side...I imagine that Small stone hits the place where the meat is removed...maybe.
I failed to choose the right product. I'll install the unpadded one.
I don't think there would be a problem with Full Cowl or something like that.
View detail
Parenthesis is good
The Red Frame is cool
It was just not installable on my Fender Eliminator
The frame is wide, so make sure you take proper measurements when you install it
If you drill a hole in the Fender EliminatorFrame, you can install it on the next holiday Installation
If you don't have tools, etc., it can be a little difficult
Number is gorgeous and looks perfect
View detail
Essential for License Plate Protection
I've installed them on all my previous Motorcycles
I always use the License PlateSingle Body because it bends immediately I try to do this
View detail
![MOUNT LIC PLT FENDER BLK [2030-0886]](https://global.webike-cdn.net/photo/impression/10/10cb95f71615fbe87cc90541a5b0f1fdL.jpg)
Fits: HARLEY-DAVIDSON Sturgis FXB, HARLEY-DAVIDSON Sportster 1200 XL 50, HARLEY-DAVIDSON Sportster 900 XLCH, HARLEY-DAVIDSON 1200 Electra Glide FLH, HARLEY-DAVIDSON Low Rider FXSB, HARLEY-DAVIDSON Road King Classic EFI FLHRC, HARLEY-DAVIDSON Super Glide EFI FXDI, HARLEY-DAVIDSON 883 Hugger XLH, HARLEY-DAVIDSON Softail Fat Boy EFI FLSTFI, HARLEY-DAVIDSON Fat Boy S FLSTFBS, HARLEY-DAVIDSON Street Bob FXDB, HARLEY-DAVIDSON 1200 Fat Bob FXEF, HARLEY-DAVIDSON 1200 Roadster EFI XLR, HARLEY-DAVIDSON Super Glide FXD, HARLEY-DAVIDSON Sportster 1000 XLCH, HARLEY-DAVIDSON Super Glide II FXRS, HARLEY-DAVIDSON 1200 Low Rider FXS, HARLEY-DAVIDSON Low Rider Custom FXLR, HARLEY-DAVIDSON Super Glide Custom EFI FXDCI, HARLEY-DAVIDSON Low Rider FXS
Satisfied after installation
You need an electric drill If you need to process it from the beginning, it should be written in the instruction manual ('∀ `) Screw holes in the License Plate do not match The rest is good! View detail
It does not need it if it says not to need it (Lol)
It is essential for the current 2 Motorcycle Items?
I made it Black according to Rear Fender, is it a Custom feeling thin?
I should have made a more prominent color, but it is difficult to match with PinkNumber.
View detail
Fits: SUZUKI GSX-S750, HONDA CBR500R, YAMAHA YZF-R3, HONDA CB500X, HONDA CB150R, HONDA CB300R, YAMAHA YZF-R25, YAMAHA XSR900, SUZUKI GSX250R, SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-R125, KAWASAKI VERSYS-X 250, HONDA PCX125, HONDA NC750X, HONDA CBR650R, HONDA CBR650R, HONDA CBR400R, HONDA CB650R
Good quality
The quality is good. But, there is a point i feel disappointed which is the nuts are not included. I need to buy them separately with extra money. View detail
I was a bit disappointed but were you satisfied?
What made you decide the purchase?】
Because I am in Fender Eliminator, the License Plate has been exposed and there was a fear of bending.
【How was it actually used?】
Rib is solid, there is a sense of rigidity very much, even if you shake by hands Large durable at all.
【Was it difficult to install? (Hard parts case)】
DAYTONA 's Fender Eliminator had difficulty because Nut can not be rotated unless RearCowl is removed because License Plate installation Nut is hidden inside.
【Please tell me the point of installation and hang (in the case of Hard parts)】
I think that it is necessary to check the installation state of the License Plate at the present time and install it according to it.
[Is there anything I was disappointed about?]
Although this is a personal opinion, it is useless because I bought it without confirming the spot, but I think that it was a little thick. Let's say good because rigidity increased accordingly.
【Hope for Manufacturer ? Please let me know if there are any improvement points]
There is a problem with packing. By vibrating during transportation, it seemed like White rubbed like some rubbing and I thought I was going to return it, but I decided it was probably the same and I painted it myself. If it is overseas production, I think that it will be understood by everyone that it takes time to transport, so I'd like to consider the neighborhood.
【Have you compared items?】
YOSHIMURA's Carbon License Plate Holder, but it's too expensive so I decided to do it.
[Others]
View detail
Nice looking
Nice looking bolt & nut, add some colour to the number plate. Haven't try install on my bike but it will look good. Nice brand from posh. View detail
![PREMIUM ZONE License Plate HolderQuantity:Set [M6]](https://img.webike-cdn.net/catalogue/images/15651/91950_O01_TS.jpg)
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
A short leg but a handsome guy
I attached it to Axis Treat.
Bolt is short.
I managed to install it, but I plan to purchase it separately.
The texture is cheap, but I like the shape.
View detail
For Fender Eliminator Kit installation vehicle, confirmation of own vehicle is required before purchase
Based on my experience, I thought that I could easily install. However, our car NMAX 155 was fitted with the Fender Eliminator KIT, and the mounting hole of the License Plate had become considerably higher.
Therefore, it turned out that the Parts interfered with the car body and could not be installed.
Although it is making the product, although slight unevenness was seen in the Anodized processing, it is good because it is the back side. The attached BoltCollar is made like Dress-up. So I decided to use only BoltCollar.
I think the product itself is reasonable for price. It is better to check the location of the License Plate mounting hole of your car before installation.
View detail
![PREMIUM ZONE License Plate HolderQuantity:Set [M6]](https://img.webike-cdn.net/catalogue/images/15903/91948_1_TS.jpg)
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
I think that it is good for One point
We are using it for mounting Number.
Although it is a product of feeling lost without permission, I think that it is good for a little Accent.
If Bolt is a little longer and I attach a Frame cover a lot, I think it will be different because I can do various things, but with Fender Eliminator Kit attached with Reflector it is regret to install Frame cover with Bolt's Length Limit.
I think that it is more expansive for those products to allow some more room - - -
View detail
At One point.
Since I also use Blue color Aluminum parts, I purchase it. There is nothing especially because it is attached to other vehicles.
It's relatively inexpensive so you may change the color with your mood.
View detail
In the same color as PlateHolder
Once you install PlateHolder it will be here too!
Because we are using two PlateHolder, because the attached Screw is short, we used a longer Screw.
Tail base is OEM's Material : Because it is Plastic, I also used Washer of Large grain to distribute the load.
Also, since the vibration of APE is amazing, we also used Spring washer to prevent loosening of Screw.
View detail