Reviews
Genuine Yamaha Tank Pad for MT10
This was something I had been meaning to buy but never got around to it. My mistake as I ended up with a small scratch from my jacket on the tank. Rather than get a respray, I just thought it best for now to get a new tank pad which will cover the scratch and then also add protection for any future scuffs. The correct tank pad was not hard to find, I just filtered the manufacturer and then model of bike and there were a couple to choose from. I deceided on teh genuine Yamaha one as it will fit as it should do with it being made for this bike. The cost was not too bad actually and better than I had seen for sale locally. With a couple of other tank pads for other bikes, I had them all shipped together via EMS. EMS just do what they say and get your order to you quickly. Mine arrived 5 days after the shipping date which is perfect. The entire order was neatly packed in the box, the tank pads were all kept nice and flat so there was no distortion which could have been a problem when fitting. The tank pad came in a Yamaha packet and was neatly presented. The pad itself feels very nice and smooth but does have a bit of friction due to the materials used. I was expecting a slightly more domed gel pad but for what it is, it's fine for my needs. Fitting was straight forward and when on without issue. Pleased with the purchase and hopefully, this stops any future scuffs from happening with my jacket zip. Thanks Webike View detail
OEM Product when in doubt
I ran it for a little bit, but it has a moderate grippy feel, so I feel it's for street use.
Isn't it big? I thought for a moment, "It's too big," but I didn't care. It was too expensive, even for an OEM product.
How durable is it?
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25
Quintessential OEM
I bought it to hide scratches and to prevent future scratches.
This is a quintessential OEM Product.
It can be attached perfectly and looks great.
View detail
Best protection pads
Install new production pads on my bike. The material is with highest quality. It fits well and looks good on my bike. Highly recommend for others thank. View detail
A little difficult to put up.
I am satisfied with the Guard where my feet hit the ground when I ride.
One Primer is included for sticking, but I wanted to stick it firmly, so I bought the same Primer from amazon and applied it lavishly before gluing it. It is firmly attached without peeling off.
View detail
Wear-resistant patches
My motorcycle is a YAMAHA XMAX300. Usually when I get on and off the car, if I don’t pay attention to the shoes, the fuel tank will be worn, and there will be a lot of scratches after a long time. This makes me very uncomfortable with obsessive-compulsive disorder, so I am I bought the original patch on webike, although the price is more expensive, but it is much more durable than other sub-factory patches. -------------------------------------------------- -------- My motorcycle is YAMAHA XMAX300. When you get on and off the car, if you do n't pay attention to the shoes, you will wear it to the fuel tank. After a long time, there will be a lot of scratches. Webike bought the original patch. Although the price is more expensive, it is much more durable than other sideways. Powered by Google Translator View detail
Amazing Tank Side Pad
About quality and texture: Great quality and perfect texture for grip About the feeling of use: Grips perfectly to position Products to buy together: N/A Difficulty of installation: Extremely Easy Cost performance and comparison with other products: Expensive but looks very good About shipping and packaging: PERFECT Packaging and delivery Any concerns, cautions, or advice when purchasing: No concerns- GOOD JOB WEBIKE! View detail
If the colors are right...
I was a little worried about whether the black pad would look good on my YZF-R7 60th anniversary car because of its white color, but I stuck it on. There were instructions on how to install it, and it was easy to put it on, but it didn't match the great color scheme of the White and Red tanks, so I took it off. I bought Stomp Grip Clear instead, but it was more difficult to adhere. View detail
Beautiful tank grip
Such a beautiful tank grip which made by japan yamaha, Made in Japan, have high quality, easy to clean. Shipping is fast. View detail
High quality and security of OEM
When I was looking for a Tank Pad, I looked at a lot of products, but I personally thought that many of them had a messy Design.
We were also looking for a product that was as simple and high quality as possible, which ultimately led us to OEM Product.
I like that it is high quality and safe to use.
View detail
It peels off in places.
I installed this in August and the Primary treatment fluid dried out quickly.
Will it work in this condition? After installing the pad, I cured the edge of the pad with Tape.
About 2 months later, as expected, both ends of the Pad in front of the fueling port are peeling off.
The Manual says not to reuse a pad that has been peeled off, but if it peels off so easily, there seems to be a problem with the Primary treatment itself.
View detail
Wide range of Guard
I had it installed by Shop when I bought my Motorcycle.
You can do this Level by yourself as long as you degrease it well and position it correctly.
The Guard range is wide, so you don't have to worry about scratches from the bracket of the Pants.
I also think it is probably easier to knee grip than not.
I would have liked to have had Color variations if possible, but...
View detail
To prevent scratching.
I put it on because it is easily scratched by shoes when getting on and off the car. It's easy to put it on, but be careful with the positioning. It looks good and I am satisfied. View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25
The quintessential OEM luxury!
Motivation
Due to the 20 year old Mat silverMaterial, there were several scratches and stains on the tank due to carelessness.
At first I bought it to hide the scars.
[Price]
As for the price, it is a bit higher than similar products.
But as an OEM, trust is paramount!
【attachment】
End of 5 minutes - Easy
[Feeling of use]
After all, OEMManufacturer is a bargain for a slightly higher price.
The color tone and texture are different from the external brands. "RLogo. The atmosphere of R25⇒R1 was created by Honeycomb, a three-dimensional print of W
I've also noticed a good grip feeling in my legs and knees for pass and Winding driving.
(I didn't intend for it to be a Gripup, but it's an unexpected bargain!
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25
As expected of Y'S GEAR, design and functionality are combined in a high dimension.
I asked to have it installed before delivery.
It's pricey, but the car models Exclusive Design and functionality are outclassing to fit the Tank shape well.
I thought about Universal Product's Tank Pad, but this is the only one I can think of.
If you want to ride for a long time, the cost performance is also satisfactory.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR700, YAMAHA XSR700, YAMAHA XSR700
Stable OEM Products
I bought the XSR700 Red, but I didn't want to get a scratch in it
I think it's easier to ride because it gives you a better grip
I feel that the design is tighter with one point in the tank
The costumer is an OEM product, so I don't think it's that good
View detail
MT10 Tank protector
Disappointed. Flat piece of vinyl low quality this, so disappointed. want to send back for the money was expecting good quality, it is not worth it at all. Will not put this on my bike would down grade it. I took a photo, but it will not load it is low res, small file and should easily load. Showed up and was there, but when I submit says an error. View detail
I am very satisfied with the product.
You can purchase items very quickly and with confidence. Moreover, I think that it is convenient to be able to find products easily and to select various things.
Thank you.
View detail
Texture is good, but pasting is Large strange
The texture is good
It looks better and the traces of shoes do not remain on Body
However, pasting work is quite Large strange
There is no guide of the place to paste,
Also in the Instruction Manual I have not written Ad Vise, which is the point to put in, or which of the three are the first to put on
It is best to clip it to Beauty with each mount and position it by trial and error on its own, but it is quite troublesome
Peel off the backing and paste it, it's a game of one shot
Since adhesive strength falls, it can not be pasted over and over again
I wish the Instruction Manual was a little more kind
View detail