Reviews
Genuine Kawasaski Tank Pad for Ninja 650
This was purchased for the Ninja 650 to help protect the fuel tank from scuffs. This does happen with the leathers zip section so always best to help stop that in the first place. The correct part was not hard to find, I just used the search facility on Webike and narrowed down the search to OEM Kawasaki and fuel tank protection. There was a few to choose from but only this one was specifically Kawasaki branded for this model. The cost was pretty good for such a good tank protector and along with a few other items in my basket, I got them all shipped together to save on a bit of shipping cost. I generally use EMS these days as they just get the job done. I almost always get my order delivered within a week and more so in 5 days from shipping Webike warehouse. This was no exception, the order arrived in 5 days as expected. The outer box was sealed along each side and the inner was well padded out. With the tank pad being flat and needing to stay that way during transit, Webike had this taped to a large piece of cardboard to keep them safe. This worked a treat. The tank pad itself was packaged in a nice Kawasaki standard packet. They are flexible but do have some structure to them. They were slightly on the thin side but when you think about it, if they were much thicker, you would struggle to get it placed where you need it anyway. I am very pleased with the purchase and look forward to trying them out on the road as they also supposed to give a little grip to the tank too. Added bonus. Thanks Webike View detail
very good
Good looking and easy to apply, nice product. View detail
Kawasaki Tank Pad.
Very Compact, good looking and easy to apply, very good product. View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI Z400, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Z250, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 250
Genuine Kawasaki Tank Pad (3 piece)
I have said this before and this is something every fuel tank should have on them from factory. Fortunately, no scratches to cover on this beautiful tank. No need to tempt fate so I just thought it best bet for now to get a tank pad. This will help stop any scratces and abrasions from the jacket etc. The correct tank pad was not hard to find, I just filtered the manufacturer and then model of bike and there were a couple to choose from. I deceided on the genuine Kawasaki one as it will fit as it should do with it being made for this bike. The cost was not too bad actually and better than I had seen for sale locally. With a couple of other tank pads for other bikes, I had them all shipped together via EMS. EMS just do what they say and get your order to you quickly. Mine arrived 5 days after the shipping date which is perfect. The entire order was neatly packed in the box, the tank pads were all kept nice and flat so there was no distortion which could have been a problem when fitting. The tank pad came in a Kawasaki packet and was neatly presented. The pad itself feels very nice and smooth but does have a bit of friction due to the materials used. Fitting was straight forward and when on without issue. As this is a 3 piece tank pad, you should really mock up the fitting beforehand so you know where it will sit once you remove the backing. Easy if you take your time. No one wants to have a constant reminder that they messed up with a wonky set. Pleased with the purchase and hopefully, this stops any future scuffs from happening with my jacket zip. Thanks Webike View detail
Genuine Kawasaki Fuel Tank Pad for Z900
This is something every fuel tank should have on them from factory. Unfortunately, sometimes scratches occur and this makes a real mess of a beautiful tank. This was exactly what happened to this Z900. I just thought it best bet for now to get a new tank pad which will cover the scratches and then also add protection for any future scuffs. The correct tank pad was not hard to find, I just filtered the manufacturer and then model of bike and there were a couple to choose from. I deceided on the genuine Kawasaki one as it will fit as it should do with it being made for this bike. The cost was not too bad actually and better than I had seen for sale locally. With a couple of other tank pads for other bikes, I had them all shipped together via EMS. EMS just do what they say and get your order to you quickly. Mine arrived 5 days after the shipping date which is perfect. The entire order was neatly packed in the box, the tank pads were all kept nice and flat so there was no distortion which could have been a problem when fitting. The tank pad came in a Kawasaki packet and was neatly presented. The pad itself feels very nice and smooth but does have a bit of friction due to the materials used. I was expecting a slightly more domed gel pad but for what it is, it's fine for my needs. Fitting was straight forward and when on without issue. Pleased with the purchase and hopefully, this stops any future scuffs from happening with my jacket zip. Thanks Webike View detail
Nice but a bit small.
Nice simple design. It compliments the pattern of the stock seat. It's a bit on the small side, so correct placement is key. A bit bigger would have been good. Make sure it covers the area where your belt buckle might contact the tank during normal riding. Also, be sure to fit it while the bike is level..either use the centre stand or paddock stand. View detail
Sticker.
The actual Sticker is a single piece Sticker. Although I prefer the look without it, it is more convenient to have it to prevent scratches on the Tank. The instructions for the position of the sticker are included in the package, so anyone can stick it. I have driven 500km after applying the sticker and I am satisfied that there are no scratches on the tank. View detail
Fits: KAWASAKI Z H2, KAWASAKI NINJA H2 SX, KAWASAKI Ninja SE+(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002BKF), KAWASAKI Ninja H2 SX(ZX1002AKF), KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE(ZX1002AKF), KAWASAKI Ninja H2 SE(ZX1002BKF), KAWASAKI Z H2, KAWASAKI Z H2 SE
Protected from wounds.
This is an OEMTank Pad from H2 and I use it on my Z650.
It took a bit of work to apply the Tank because of its different shape, but it is firm, thick, and secure.
View detail
OEMParts
The knee bites firmly when Cornering!
OEM only, no deterioration even after 2 years of outdoor storage
View detail
Fits: KAWASAKI Z H2, KAWASAKI NINJA H2 SX, KAWASAKI Ninja SE+(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002BKF), KAWASAKI Ninja H2 SX(ZX1002AKF), KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE(ZX1002AKF), KAWASAKI Ninja H2 SE(ZX1002BKF), KAWASAKI Z H2, KAWASAKI Z H2 SE
Select a shape
I purchased this for use with CLEVERWOLF's Tank Cover, but the bend was too tight to use.
Because of its hardness, it can only be used with a wide, flat-shaped tank.
Furthermore, due to its hardness, there were multiple thin abrasions on the surface from the time of purchase.
If the shape is right, the design and original texture are good.
View detail
Fits: KAWASAKI Ninja 250, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Z250, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 400, KAWASAKI Z400
OEM is good
I peeled off the Chinese one that had been pasted since I bought the Z400 and pasted the Kawasaki OEM one. It is divided into two parts, but if I peeled off the base paper and put it on the tank, I could put it on the tank as it is. View detail
Kawasaki OEM is good
When I bought it used, it had a Chinese-looking Knee Pad on it.
The double-sided tape was sticking out from the Knee Pad to which it was attached and was dirty with Garbage.
I bought the Kawasaki OEM to peel and stick anyway.
The OEM was totally different in terms of texture, interaction with the Tank surface, etc....
View detail
Fits: KAWASAKI Z H2, KAWASAKI NINJA H2 SX, KAWASAKI Ninja SE+(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002BKF), KAWASAKI Ninja H2 SX(ZX1002AKF), KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE(ZX1002AKF), KAWASAKI Ninja H2 SE(ZX1002BKF), KAWASAKI Z H2, KAWASAKI Z H2 SE
Nice
Hello everyone, this is a good product and I recommend it to everyone. This is 100% original, you can buy with confidence. View detail
Kawasaki Tank Pad
Since it is OEM, it can be installed without any discomfort. View detail
Fits: KAWASAKI Z H2, KAWASAKI NINJA H2 SX, KAWASAKI Ninja SE+(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002BKF), KAWASAKI Ninja H2 SX(ZX1002AKF), KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE(ZX1002AKF), KAWASAKI Ninja H2 SE(ZX1002BKF), KAWASAKI Z H2, KAWASAKI Z H2 SE
Good
Hello everyone, here I recommend everyone to buy this product, it can prevent our belts/coats from being scratched, it is a very good product, not only beautiful but also very effective. View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4RR KRT EDITION, KAWASAKI Ninja ZX-4RR 40t Anniversary Edition
LusterLuster's Kawasaki!
Carbon Spec. glossy Tank Pad.
The sticking feeling is as OEM as you would expect. Adhesive strength is spot on!
Once it sticks, it is strong and cannot be reapplied. Make sure it is firmly attached.
Check the position and attach.
View detail
Since it is an OEM
Other Brand Products are large, thick, and OEM. View detail
get on well with (someone)
I exchanged Tanks, so I decided to use the same one as before. I still prefer pure raw. View detail
NinjaZX-10RR Tank PadNinjaLime green
Good I put it on top of Carbon Tank Pads.
Does it serve as a feeling Cushion as it just hits the belly area?
The Ninja Logo and the colors are so much more vibrant than I expected!
Thank you
View detail
Good size for light motorcycles, small size for large type.
The size is small, so it was easy to install.
I think it is too small for a large motorcycle. Just fit for light motorcycle.
I thought it was a Size feeling to do so. Anyway, Tank Pad should be degreased and installed on a warm day.
It is possible to use Dryeretc. to force the paste, but it is not impossible.
It is better not to put it on in winter (it peels off easily).
It will last longer if it is applied on a day when the temperature is above 20°C (68°F).
View detail