Reviews
Fits: HONDA CBR650R, HONDA CBR400R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB400F, HONDA CB250R, HONDA CB1300SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CRF1000F Africa Twin, HONDA VFR800X, HONDA VFR800F, HONDA CRF250 R, HONDA GROM-II
misdescribed
I bought it to put on my CRF250L
The shape of the photo clearly doesn't match the Tank cap, so "it's strange "but but it's clear "Conform" I ordered it because it says, "I ordered it," but it was still something else
I gave it to a friend who has a corresponding Motorcycle
Perhaps you are confusing it with the CRF250RALLY
Please be careful if you are thinking of putting it on the vehicle in question
View detail
MT10 Tank protector
Disappointed. Flat piece of vinyl low quality this, so disappointed. want to send back for the money was expecting good quality, it is not worth it at all. Will not put this on my bike would down grade it. I took a photo, but it will not load it is low res, small file and should easily load. Showed up and was there, but when I submit says an error. View detail
Whenever possible, it's better to choose another product
Review erased, so I added it and reposted it
It's going to get erased again anyway …
The one I received was badly stained by White
It was degreased and stuck on, and two days later it came off when I rode the Motorcycle
Peeled areas have no adhesive strength and cannot be reused
Avoid this product unless you're really good at it
View detail
Hey, this is bad
I received one that was dirty or white in places
This is terrible I can't help but wonder how they sell this as new I have nothing to complain about
I think I'd rather have the inexpensive crackers on sale at a certain Ok or amazon
View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS)
I can not install at all. It is impossible for amateurs.
It is impossible to install with ordinary people after opening products after delivery.
First I did not write any explanation of whether processing by experts is necessary.
It's the worst. Because it is unused, please return the item.
View detail
Fits: YAMAHA Universal, YAMAHA Universal
With an appearance that emphasizes COSPA IMA Chain!
It is Large strange to correct the pasting position, especially the place of 5-Hole is very weak and it seems to be cut.
Also, because the 5-Hole position of Tank Cap Cover and the dimension of CuttingSeal are not accurate,
To some extent, I had no choice but to compromise.
We decided the position and applied pressure from above..
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
1.0
Even though Pin is too thick to cut the hole on the Tank side, Cap does not open at all after installation. The lowest item. I can not use it because it will not open unless I hit it with Hammer. Just a waste of gold. I want you to return it gold. View detail
Cap is loose
In 4 LMONKEY 's Restore being done, purchase with things for 4 LOEMTank. Plating is nice, but Cap is loose and it seems to be disengaged while driving. View detail
correction
At first it seemed to be okay ... Although some gaps still tougher as a tolerance are still attached for a few months, yet it is covered and it is climbing on Pad itself, it is just a defective item. Durability is slightly less than two months. It is better not to buy. View detail
Fits: SUZUKI Universal, SUZUKI Universal
not suitable for gsx-s 750 very disappointed
ne conviens pas du tout sur gsx-s 750 2017 tres deçus ne s adapte pas sur une moto suzuki gsx-s 750 2017 gsxs750 gsx-s750 2017 do not agree at all on gsx-s 750 2017 very disappointed (translated by google translation) do not fit on a motorcycle suzuki gsx-s 750 2017 gsxs750 gsx-s750 2017 View detail
Fits: APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA Factory, APRILIA Factory, APRILIA Factory, APRILIA Factory, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia)
She said that she was already floating from release paper at the time it reached home. - - - -
When we arrived, it was already floating from release paper.
It seemed that the adhesive strength was not 0 and the season was still hot, so I tried adhering to Tank in the meantime and then it will float after a while.
As another means, by holding down from above for a long time, I hope that the shape of Pad itself will become familiar with Tank, I will keep curing Tape from above and keep it familiar 2 months.
I thought that it would have become familiar with it and seemed to be sticking somewhat when removing the curing tape.
But. It floated on the next day.
If you leave it like this, you will scratch the painting of Tank if you get in dust, so you only have to peel off.
It is mere Large loss.
View detail
It is a failure. Add an image.
I took it because I think that it is easier to understand where there was an image. I can not fix Imp, so I wrote a new photo. Protection of the surface? Since Seal was peeled off, whether it was an adhesive or not had arrived at Pad and the surface became textured. Black rubbed when I thought of dropping it. It seems that improvement is necessary..
View detail
It is a failure.
After peeling off Seal which seems to be for protecting the surface
Protection Seal adhesive? Is it sticking to what is supposed to be? Textured surface becomes dirty.
The color of the product is too yellow to say White.
Since I stripped the thing which was stuck before, I pasted it to prevent Wound carelessly, but it was a failure.
View detail
Well (_ _)
I noticed that there was unevenness in the weaving first, with the products being sent in my eyes.
Material : Due to the nature of the Carbon product, I thought that there was no choice but to install it with Dealer, but the end will float in the 2017 formula.
From Dealer's Mechanic, when sand etc enters from the floating place, Tank gets scratched. It was told, I immediately removed it.
I am sorry to have expected it.
View detail
Update on tank after 2 years... Worthless should send back my $ plus some..
DO NOT BUY THIS TANK !! ITS THE WORST EVERYTHING WELD HAS FAILED MORE THAN ONCE.THE METAL THEY USED IS WAY TO THIN AND WORSE THE FRONT MOUNTING POINT ON THE FRAME IS meant TO HOLD A LITTLE EVSP CANISTER .. NOW ITS HOLDING A 10LB GAS TANK.. UGG SO AFTER FIXING THE WELDS 3 TIMES NOW THE FRAME TAB BROKE OFF.. Oh on top of that the liner inside startd coming off almost immediately in little pieces and cloging the cheap petcock that started leaking I would stay away from any tank this company makes.. View detail
It is very disappointing.
Texture - COSPA - Design is satisfactory, but it seems to be weak adhesive strength due to a fundamental problem.
Although the base was degreased and pasted, if it keeps overnight, it curls up even from the tip part of the plane anyhow it is a curved part. Even if you close it using Dryer, the next day .... I'm sorry.
View detail
worst
A word.
Impossible to install.
Hello Manufacturer, how do you manage?. It is Objection !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
View detail
Painting required
First product cracked, repaired full of distortion badly. The following products are foreign matter contamination, cracking & repairing, nesting holes, guts, according to the Instruction Manual the painting is the premise. Nests and holes may disappear, but foreign matter does not disappear. It is hard to understand in the photograph, but it stands out quite. Parenthesis It is bad and I do not feel like using it. I waited painting for 3 months, it is the product of the expert favorite. View detail
I could not install it.
Purchase to install in S1000RR 2015 formula
From the result it was impossible to install.
I thought that how to install it was bad, I took it to Motorcycle shop
It is said that installation is impossible without Cowl processing on OEM side. BMW's Motorcycle abandoned its installation because OEMCowl is very high. It can not be returned This product, it has become from 10,000 yen to 25,000 yen ...
Is it such a thing? It is very disappointing.
View detail
Fits: Others Compatible with Hose inner diameter of 8mm.
Gasoline leaks
Gasoline leaks from the Joint section.
I think that Packing is bad - -
Well, recently when you buy unvalued items, it's just Ha Gap..
View detail