Reviews
To prevent scratches on Tank
I bought this to prevent scratches to the Tank as it is SS.
It is not limited to this product, but it is rather difficult to make sure that the center is exactly in the center when applying.
The adhesion is neither too strong nor too weak, and I think there is a good balance between strength that does not seem to peel off on its own and weakness that does not damage the paint when peeling it off.
The size is a little larger than the cheap ones from other companies, and the cover range is wider. The texture is glossy and gives a sense of high quality, but the durability against sunlight is yet to be seen.
View detail
Name Chain
I had put up a different one but immeChain.
I like the design and quality well enough.
Cheap counterfeit? I recommend that you use the genuine product.
View detail
It is good to be normal.
Second purchase for my wife's Motorcycle.
[How is it used?
Strip off the Chinese one and replace it with this one.
Was the one you received as per Image?
Yes
Was the installation difficult?
I applied it with one shot, not with water, but I couldn't apply it straight and had to reapply it.
How was your experience with it?
A few days, but no floating or peeling.
Mine, which I put up before, is currently fine.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If the backing paper is divided into two parts, it may be easier to paste it as it is.
View detail
Is good
Pasted on MT-25, SeatLimit from MTMark, so I removed Seat and pasted it.
I was worried about the green color of the other site's comments, but I am satisfied that it does not look greenish.
I have stuck a Chinese one from a certain jungle, but the adhesive strength is unmatched, and with proper degreasing, so far it is firmly attached to the edges.
I didn't know where to put the small ones, so I put them on my knees.
View detail
Like this
Neither good nor bad
This is how it feels.
View detail
It's neither good nor bad
Well, a common and ordinary Tank Pad.
I was wondering if it was a pachimon? I was not sure about the quality of the product, but I decided to go with this one because it seems to be of delicate quality.
I don't have anything special to say about it, but it seems to be durable.
View detail
Just put it on and it has a Fashion feel.
[How is it used?
I purchased this product to prevent scratches and dress-up my XJR400R.
Was the one you received as per Image?
It was just like the image, and I am satisfied with the carbon style without feeling cheap and uncomfortable after pasting it on.
How was your experience with it?
I can't say anything about the defensive performance because Zipperetc. never hits it.
However, I think it is very good because it has a dress-up effect (a sense of fashion) just by putting it on.
[Points to note]
Before applying, degrease thoroughly with Parts cleaneretc.
How did it compare to other products?
The thicker types like those of other products look uncomfortable when viewed from the side, so I think a thin type like this product is good because it blends in with the original design of the car body.
View detail
Best.
The design is large and the size is large. The texture is a little bit better than I expected. View detail
Size and Design are perfect The hittiness is good
Well, I think the price can be kept down a bit more, right? I think Isn't that why fake products are available at low prices? And Basically, RiderGoods is expensive or.. (Sweat)
View detail
It's an itchy, itchy, tank scratch prevention
Fastener hits the Tank, so a Tank Pad is a must
There are a lot of taller ones for the CBR250RR, but none of them have a shape that can be protected I arrived at this product
The design is simple and perfect with this product to protect it from the trunk to the front of the seat It is
But depending on how you apply it, it can be a little difficult to apply the tight parts of the R's
View detail
Commonly usable
Ninja400 (18) Attached to
I could stick it on normally, and even if I failed, I could reapply it twice Recommended for
The adhesive strength is a little weak, but it didn't come off while driving, so I guess it's enough adhesive strength for me
It looks great with Carbon Style and Black Tank
View detail
I was disappointed to get it out of Case!
The seal on the case hides a part of the tank pad, so you need to take it out to see if you can find it There wasn't; parts of the Tank Pad were not thick and were just Seal! You'd better see for yourself when you buy this Manufacturer's product! View detail
I was disappointed to get it out of Case!
Because the seal on the case hid a part of the product, I didn't understand it unless I took it out Part of the Cushion of Tank Pad was missing and it was just a seal View detail
It attached for a petit Dress-up up and crack prevention. texture -- the intestines -- since it is thick, and a crack is not attached, either, if it is this, I think that it is good. A Cost performance is good although it is only what removes and sticks
It attached for a petit Dress-up up and crack prevention. texture -- the intestines -- since it is thick, and a crack is not attached, either, if it is this, I think that it is good. A Cost performance is good although it is only what removes and sticks a Seal. About a handle, it is liking. View detail
When the cause which purchased this product removes notes sticker stuck on the Tank, it is because it has become very dreary. It is from the desire to add some Designs rather than calling it the Wound prevention purpose. Although this product was ch
When the cause which purchased this product removes notes sticker stuck on the Tank, it is because it has become very dreary.
It is from the desire to add some Designs rather than calling it the
Wound prevention purpose.
Although this product was chosen in the Size exactly settled in the
Tank, I think that the touch stuck like a photograph matches well by a Design which was made for the XG250 TRICKER.
View detail
I stuck instantly!! It is cool.
I stuck instantly!! It is cool. View detail
The thing with a cheap price was pleasing and purchased. Since it is large, a crack is prevented firmly. Since it will float if the adhesion of an angle of resticking is lost or it is turned at and stuck, it may merely grow into some and the quali
The thing with a cheap price was pleasing and purchased.
Since it is large, a crack is prevented firmly.
Since it will float if the adhesion of an angle of resticking is lost or it is turned at and stuck, it may merely grow into some and the quality of a nerve.
Since it will grow into a big accent and a crack will also be suppressed if it can stick, it is satisfactory.
View detail
It attached to the xanthus 400 of a kawasaki. A color variations is also abundant and the large thing of middle, and two long and slender things on either side and net weight are satisfactory. [ a seal, or ] And a price is more delicately [ than o
It attached to the xanthus 400 of a kawasaki.
A color variations is also abundant and the large thing of middle, and two long and slender things on either side and net weight are satisfactory. [ a seal, or ]
And a price is more delicately [ than other tank pads ] cheap.
In my case, only one sheet of middle is stuck, and the long and slender seal is taken.
If a tank pad grip lever rubber is united by the product made from Progrip like me, a feeling of unification will be produced (*^_^*)
View detail