Reviews
Cool?
For XSR (For SEA BASS GSX) I bought it because the color was Red and the design was good for Parenthesis. I tried to put it on anyway, and it went on surprisingly well. However, the two edges on both ends are angled, so they might come off. But I was satisfied with it in my own way, so I am glad. View detail
Fits: HONDA VFR800X, HONDA VFR800F, HONDA VFR1200X, HONDA VFR1200F, HONDA CBR900RR, HONDA CBR600RR, HONDA CBR600F, HONDA CBR400R, HONDA CBR1000RR, HONDA CB750, HONDA CB400X, HONDA CB400SF, HONDA CB400SB, HONDA CB400F, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1000SF, HONDA CB500X, HONDA CBR500R, HONDA VTR1000F
sense of unity
The last time I bought and installed the same Black color, I thought it would be more consistent with the same color, so I decided to buy a Blue color before the Point expired.
I like the texture but the Design is so-so.
View detail
Tuning fork for Yamaha cars
I bought a tuning fork Mark for my Yamaha. This time, I degreased and centered the car well. The recommended environment is 15℃ or higher, so I used a dryer to warm up the car while I worked. View detail
Fits: HONDA CBR650F, HONDA CRF250 R, HONDA VFR800X, HONDA CBR400R, HONDA CRF1000F Africa Twin, HONDA CBR650R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CB1300SF, HONDA VFR800F, HONDA GROM-II, HONDA CRF250L, HONDA CB400SB
ODAX Keiti Fuel Cap Pad
연료통 입구에 흠집이 나는걸 방지해 주려고 샀습니다.
푹신푹신한 재질이라 더 좋은거 같아요
스티커만 붙이면 되는거라 설치하기 간편합니다.
I bought it to prevent scratches at the entrance of the fuel tank.
I think it's better because it's a soft material
It's easy to install because you just need to put on a sticker.
----------------------------------------------------------
I bought it to prevent scratches at the entrance of the fuel tank.
I think it's better because it's soft and fluffy
You only need to attach a sticker, so it's easy to install.
I boughHt it to prevent scratches at the enterance of the fuel tank.
I Think It'S BECAUSE IT A SOFT MATERIAL
It's Easy to Install Because You Just need to put on a Sticker.
Powered by Google Translator
View detail
Careful positioning and pasting
Tank Pad and Side pad are Quantities:Set and comfortable design that matches the car body.
This is a clear type that does not choose the color of the car body, but if you are not confident that you can stick it so that no air can get in, please use Material:It is safer to choose a with color type such as Carbon Style.
I messed up the position of the side pad, and the area near the tight curl at the bottom of the tank started to float afterwards.
I think I'm just not very good at it, so as long as I don't make mistakes in positioning, I should be able to apply it without any problems.
I like the product so much that I am thinking of buying it again for a second chance.
View detail
Fits: SUZUKI SV400, SUZUKI SV650, SUZUKI INAZUMA400, SUZUKI INAZUMA1200, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI TL1000R, SUZUKI TL1000S, SUZUKI GS1200SS, SUZUKI Bandit1200, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400
After all, if you don't buy a proper Manufacturer, it will peel off!
I had to repurchase the Mad Max? because it was no longer useful!
First of all, the cheap tank capSeal peels off easily. The reason is that the outside of the cap is wavy like GizaGiza or DanDan. The reason is that the outside of the cap is wavy, so unless the cap is made by a manufacturer that uses proper double-sided tape, the adhesive is weak and does not stick at all. The worst part is that the shape is slightly different, so the bolt position is gapped. (e.g. Mad Max)
This product from ODAX has no problems with both adhesion and shape!
But what's disappointing is that it's not Material at all.:It doesn't look like Carbon Style. A little more Material:I wanted to reproduce Carbon Style.
But it sticks firmly and the shape is Exactly!
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-R125, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI KATANA, SUZUKI SV650, SUZUKI SV650X, SUZUKI V-Strom650, SUZUKI V-Strom1000
The price isn't much different than the odd Chinese product, and this is fine.
Material bought at random on Amazon.:I had been using Carbon Style for 1 year and 2 months with 14,000km and it had lost its luster and cracked a long time ago, so I replaced it with a new one.
I really wanted SPEEDRA, but I got a call that the delivery date was delayed, so I changed to ODAX.
There was nothing strange and no Gap.
The new texture is still nice. how long will the ODAX last, the answer will be next year.
View detail
Fits: YAMAHA TZR250, YAMAHA FZS600, YAMAHA YZF1000R, YAMAHA YZF-R1, YAMAHA TZR250, YAMAHA TZR250, YAMAHA XJR400, YAMAHA XJR1200, YAMAHA TRX850, YAMAHA TZR125, YAMAHA RZ250R, YAMAHA R1-Z, YAMAHA FJ1200, YAMAHA FZR250R
To hide dirt on old Cap.
[How is it used?
I usually don't like to put anything on my tank caps, but I used it to cover up the stains on the OEM tank caps I got because I just couldn't get them off.
TZr250R (3XV) To be honest, I was fine with this brand's pad, but there didn't seem to be much other choice, so I went with this one.
Was the one you received as per Image?
Well, it can't be helped but plain weave Carbon "Wind" It is! I insist.
I thought the image of the product would be a little more subdued, but the pattern can be seen rather clearly.
Was the installation difficult?
Alignment with the cap bolt is somewhat troublesome, and no matter where it is aligned, it will be slightly off.
I think it is a good idea to put it up little by little without panicking.
How was your experience with it?
It's just a Pad, so I'm self-satisfied, but it's better than a dirty Cap.
There is no snag in opening and closing the Cap.
[Included Parts:were they on?
In addition to the Pad, the Small Clothing Cleaner is included.
[Was there anything that disappointed you?
It's a little too assertive, but well, it's a matter of taste.
【Review】
The design is quite assertive, but well, I was able to hide the dirtiness of the Cap.
If you are careful about the position of the tape, it will not get in the way when opening and closing the Cap.
It is for Tank caps for older vehicles, but I am glad it is still Lineup.
View detail
Fits: HONDA CB1300SF, HONDA CB400F, HONDA VFR800X, HONDA CB400SB, HONDA CB400SF, HONDA CBR600RR, HONDA CBR900RR, HONDA VFR1200F, HONDA VFR1200X, HONDA VFR800F, HONDA CB1300SB, HONDA CBR400R, HONDA CBR600F, HONDA CB400X, HONDA CB750, HONDA CB1000SF, HONDA CBR1000RR, HONDA HORNET900, HONDA CBR500R, HONDA VTR1000F
Good!
At Motorcycle shopetc., Material:I bought it because they only carry Carbon Style and I had never seen such a pattern and color before.
When I peeled off the Seat, it immediately became sticky, so I had to reapply it if I did not match the location well, and if I touched the sticky part too much, the stickiness would weaken, so I carefully matched the adhesive and attached the Seat.
I chose this red Seat because my Motorcycle is RedMain, but the tank lid is silver, so I put this Seat on it.:Carbon Style is fine, but with Color is also quite good.
View detail
Fits: HONDA CBR650F, HONDA CRF250 R, HONDA VFR800X, HONDA CBR400R, HONDA CRF1000F Africa Twin, HONDA CBR650R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CB1300SF, HONDA VFR800F, HONDA GROM-II, HONDA CRF250L, HONDA CB400SB
Easy installation OK
Size and installation is easy. I am satisfied with the way it looks. View detail
Fits: HONDA CBR650F, HONDA CRF250 R, HONDA VFR800X, HONDA CBR400R, HONDA CRF1000F Africa Twin, HONDA CBR650R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CB1300SF, HONDA VFR800F, HONDA GROM-II, HONDA CRF250L, HONDA CB400SB
For a little dress-up
Just stick it on, so beginners don't have to worry. View detail
Fits: HONDA CBR650R, HONDA CBR400R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB400F, HONDA CB250R, HONDA CB1300SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CRF1000F Africa Twin, HONDA VFR800X, HONDA VFR800F, HONDA CRF250 R, HONDA GROM-II
For gasoline cap protection
Purchased to protect gasoline cap and for dress-up.
The installation is completed simply by peeling it off the backing paper and sticking it on.
It will be clean and tight, and it is a good idea to put it on before hurting it.
View detail
Fits: YAMAHA TZR250, YAMAHA FZS600, YAMAHA YZF1000R, YAMAHA YZF-R1, YAMAHA TZR250, YAMAHA TZR250, YAMAHA XJR400, YAMAHA XJR1200, YAMAHA TRX850, YAMAHA TZR125, YAMAHA RZ250R, YAMAHA R1-Z, YAMAHA FJ1200, YAMAHA FZR250R
It doesn't fit
Did not fit XJR1300 RP17J.
be disappointed
View detail
Fits: HONDA VFR1200F, HONDA VFR1200X, HONDA VFR800F, HONDA VFR800X, HONDA CBR900RR, HONDA CBR600RR, HONDA CBR600F, HONDA CBR400R, HONDA CBR1000RR, HONDA CB750, HONDA CB400X, HONDA CB400SF, HONDA CB400SB, HONDA CB400F, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1000SF, HONDA HORNET600, HONDA CBR954RR, HONDA CB500F
I had trouble with Fuel cap padCarbon.
Not bad, but more color variations would be nice.
After putting it on, I think Carbon might be more comfortable for me.
View detail
It's neither good nor bad
It looks nice, but when asked if the use effect is extremely Large, it is like a Title. View detail
Tank wound prevention
I am using it on a ZrX1200R Tank.
I like it because it prevents scratches and because it is Carbon Style, so it also has a dress-up effect.
View detail
It is a good item
It looks cool because it matches the color of the car body.
The feel of the product is no different from regular ones, but the change in appearance makes it a very satisfying product.
View detail
Just the right Size for a light motorcycle or moped Motorcycle!
The size is 3X16.5cm, which is just right for light motorcycles and moped motorcycles.
It is UVClear-coated, so it is hard to fade, and if you degrease it properly
It won't peel off! It is a very RECOMMENDATION!!!!
View detail
Exactly
It is Exactly on the Edge of the Tank of SV650.
Since it was a Silver Tank, we chose the color Silver for the Pad.
The hue is almost the same color, so it is a recommendation for those who do not want to stand out.
View detail
Fits: KAWASAKI Z250SL, KAWASAKI Z250, KAWASAKI Ninja250SL, KAWASAKI Ninja250, KAWASAKI Ninja250R
UVClear-coating finish is beautiful and won't fade!
I have used a variety of Tank Pads and Stickers.
This stuff is extremely flake-resistant and durable! And UVClear-coating finish
The effect is that the color does not fade! It's a pretty durable Sticker!
Material:Carbon Style is also a cool Commendation!
View detail