GIVI Motorcycle Rear Carrier Reviews

Filter

Write a review and get Webike Points!

Reviews

GIVI

05 Nov 2023

Special Carrier [DAYTONA Original]

Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA CROSSCUB110

Japanese Webike user

5/5

If you want to put a GIVI box on a SUPER CUB, install it at the same timeRecommendation

Many people seem to be struggling with the loading position of the GIVI box on the CUB, as it seems to be much closer to the back.
Knowing such a voice, DAYTONA prepared the donpipe parts, so we purchased them along with the box.
I didn't see JA44 listed in DAYTONA's compatibility chart, but my car body (JA44 Latter term) I was able to install it without any problems on the

Installation is as simple as tightening the bolt at the top of the rear suspension, and even amateurs with tools should have no problem installing it.

The key loading position also fits in a good place on Balance, and we have no complaints.

However, when I went to a wooded area after installation, the box and my buttocks often hit each other when driving in Standing, so it might have been better to move it a little closer to the back……w
It would be nice to be able to adjust the box back and forth a bit with the location of the mounting holes on the Base of the box. View detail

GIVI

12 Apr 2023

SRV Fitting [SRV-R25]

Fits: YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3

Japanese Webike user

4/5

Use with Fender Eliminator Kit

[How is it used?
I purchased this product to install GIVI's Top case on my MT-25 which I use for long trips and shopping.
There are many options for carriers, but we chose this product because we wanted to attach a GIVI Case and were a little concerned about the strength of the Grab Bar alone.

Was the one you received as per Image?
Bolt and Bracketetc. were included as shown in the pictures without any shortage.

Was the installation difficult?
It takes considerably longer to install than the Carrier with Grab Bar installation.
There is an installation instruction manual, but the Large section is explained in letters, so it was very difficult to understand MinusPoint.
Also, although the kit is not designed to be used in conjunction with the Fender Eliminator Kit, it was possible to install it in conjunction with DAYTONA's Fender Eliminator Kit at my own risk.
There is no interference with the Blinker, although it is necessary to place a 3mm spacer between this product and the Fender Eliminator Kit.

How was your experience with it?
The Tandem Footpeg and the Fender section are fixed in 6 places in total, so they are fixed quite firm.
It is quite stable, with no interference with the vehicle body or chatter.
It made shopping more convenient.
However, due to the fact that it is fixed with a Tandem Footpeg, KIJIMA's Helmet Holder cannot be used together.

[Included Parts:were they on?
All necessary items other than tools such as mounting Bolt, Nut, Bracket, etc. are included in the package.

[Was there anything that disappointed you?
As I mentioned above, the installation instructions are very confusing.
It is not enough to have a diagram like an assembled piece of furniture, even if it is explained in words....
In addition, the size of the cap to be attached to the bolt on the SIDE was not correct, so it was necessary to file it down to a size that would fit.

【Review】
Firmly fixed to the vehicle body, it makes shopping and other activities very convenient.
The holes were well aligned and there was no need for any special modifications afterward.
I would like to see a little more work done on the instructions, as the product was good. View detail

GIVI

16 Mar 2023

Special Rack [SR2122]

Fits: YAMAHA MT-09 To Racer

skooby

5/5

Givi special brackets for Yamaha MT09 Tracer

As we now have the tank bag kit attached to bothe the MT09 Tracer and the MT10. I thought it would be a good idea to get the bracket kit for my wife's MT09 Tracer so she can also have the top box attached too. Never really used this top box on the MT09 Tracer as we didn't have the right brackets. We were sold the wrong ones when we bought the storage boxes. Anyway, after doing some research, I found the dcorrect bracket kit which would mean the MT09 could accommodate the top box. Really easy to find when you go on to Gvi website. Funnily enough, Webike had this kit too at a great price. Why not just get the kit from here, no brainer. I was surprised at how cost effective the shipping was. Mind you, I do always have other items in my basket ready to go to checkout. This meant, the shipping cost, EMS fast service in this case, was really good value. All was delivered successfully in 5 days flat, no messing around with EMS fast. The outer box was taped close which I am happy about as I did not want any of my ordered parts escaping the box during transit. Now bare in mind, this kit box is not small and I was concerned it could damage the other contents of the order. No way, not after Webike warehouse do thier stuff. All the empty space in the box was filled with bubble wrap and all was neatly packed out and no chance of any movement in transit. No dramas there. The kit is really nice, it came with all the instructions you would need, it was not too difficult to understand unlike some intructions I have come across before. After a couple of minor hitches, using the wrong bolt, it eventually went on great. The brackets are nice and sturdy once fitted, the finish of the brackets is pretty good. Hopefully the paint will last a long time. Obviously, this needs to withstand some punishment as it will be open to the UK elements and also the debris from the road surface. All in all, very pleased with this purchase. We both can now pack up our stuff and head out on a few more trips and not have to worry about not having the right equipment with us. It all fits in the storage we now have. Thank you Webike, great job guys View detail

GIVI

09 Apr 2022

Special Rack [SR5130]

Fits: BMW C400X

Japanese Webike user

3/5

Ask your dealer to install it." The following is a recommendation to do so.

[How is it used?
"Day Touring." the times Souvenir Space. is now needed.

Was the one you received as per Image?
I have been a GIVIUser for a long time and this time it was again on Image.

Was the installation difficult?
considerably Kill and hassle." The following is a list of the items that are required.
Float the LuggageSpace so as not to damage the various Wiring." It's hard to find the right one.
And Grab Bar and racks are to be tightened. was not possible alone.
(a) Servant and friend. The work was interrupted because he summoned the "Labor and time lapse." occurred.)

How was your experience with it?
It is working well, with no particular modifications needed. (For now) General road travel only. (It is.)

[Included Parts:were they on?
It came with no missing items or shortages.

[Was there anything that disappointed you?
The only thing is that the price of racks has gone up.

Point and hang of installation
It is necessary to observe, think, and work carefully, shifting each part of the process.
High maintenance experience suKill." is necessary, so it is a safe bet to ask the dealer to do so.
Finally, my friend and I had to work together, and our nerves were frayed. Self work." cannot be Recommendation.
I am a "Willingness and self-responsibility." We worked with the following, but never imitate them.
(BMW cars are If you damage it in the Self work, it is out of warranty. The expensive repair cost will be…)

[Availability and clarity of the Instruction Manual
Instruction Manual is enclosed, but all Foreign Languages. Since it only describes the process, we looked at the Illustration, judged the actual product, and worked on it carefully anyway.

[ITEMS TO BUY TOGETHER
Racks that UniversalBase cannot be installed in. So, Mono-lock or Monokey Dedicated Base is always required and It's going to cost even more." Please note that the ….

[Opinions and requests to Manufacturer
GIVI GAR!" Rather, the distributor, DAYTONA, has been working with us. Translation (please at least attach a supplemental Instruction Manual! I would like to say. View detail

GIVI

06 Mar 2022

SRV Fitting [SRV-R25]

Fits: YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3

Japanese Webike user

5/5

Givi Carrier Installation

It took me a while to remove the seat, wiring, and fender, and I had to replace the license lamp with an LED one while I was doing this work. It took about 7 hours to complete the installation, partly because the sun was setting while I was doing it.
It is fixed to the motorcycle body firmly, which gives me a sense of security, and it is also good that I can handle the bike with it since it is a newer model without a grab bar. View detail