Reviews
Monkey 125 G Craft rear Carrier Type 2
Got the item fast. Listed shipping within 3 weeks. got it less than the said date. Very Nicely Made heavy duty. Very Satisfied. Easy to install. View detail
This styled rear rack compliments those other modern additions
About quality and texture, I can confirm that the quality is great and that the material used is aluminum with a mixture of silver and black anodised finishes. About the feeling of use, Some people may not like the modern style of this rear rack but I was happy to take some of the original looks away from this bike with the key changes like the fender eliminator and exhaust system, so this styled rear rack compliments those other modern additions. Products to buy together, A part that goes a long way to tidy up the rear end is a fender eliminator and while adding a modern looking rack a modern looking fender would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the rear rack for my installation was very easy due to the simple nature of the install and relatively easy access to the four mounting points to secure the rack with the included hardware and some original hardware. Cost performance and comparison with other products, The pricing of the product is great. You receive a rear rack made from quality and light weight materials. There are cheaper options from other brands but non with this type of styling but just the old school tube style racks. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Wow that's cool
Purchased to break through the load capacity Zero.
I chose it completely based on its appearance, but the texture is high, it looks Parenthesis good, and Large was the right choice.
The cargo bed and body mounting base must be temporarily fastened and then tightened after mounting on the motorcycle.
I haven't put luggage on it yet, but it should be OK if I can put some rain gear on it, so it shouldn't be a problem… so my impression is tentative:??3
View detail
Design is good and fits the 92 Grom well
I've been curious about this for a while at last week's WeBigSale.
Gcraft's Rear carrier was very cheap.
Purchased
Installation is easy and takes only 10 minutes with a single Hexagonal Wrench.
I believe it will be completed.
It's a low-capacity Grom, but now the Seat bag can be used.
It looks like it can be installed.
View detail
It's light.
We didn't want to increase the vehicle weight as much as possible, so we decided on GCraft's Carrier.
The total weight is a little over 1200 g. When not in use, the top panel can be removed to reduce the weight by 800 g.
It does not use Seat fixed Bolt, which is good for those who want to remove Seat frequently.
View detail
Rear Rack from G-Craft
* About quality and texture, Modern styled rear rack for the Monkey 125 made from 3 aluminium brackets that bolt together with the included button allen head fasteners. * About the feeling of use, Looks great on the black frame of the Monkey 125. Has numerous points to attach tie down straps but is only suitable for loads around 3kg. * Products to buy together, The matching front rack from G-Craft is ideal to also purchase for maximum luggage storage. * Difficulty of installation, Installation requires securing the 3 brackets together, removing the seat and rear shock upper mounting nuts allows the rear rack to be attached to the Monkey 125. The process was completed in 30 minutes with no difficultly. * Cost performance and comparison with other products, Far from the cheapest rear rack available for the Monkey 125 but if you prefer the flat aluminium style over the round tube style then it's cheaper then the other option of the type 2 rear carrier from G-Craft. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, G-Craft rear carrier type 2 has improved loadability and increased load capacity from to 5kg. Use the product reviews to assist in making a decision on your purchase. View detail
Excellent, I would recommend to anyone.
The G-craft luggage rack is what I needed to allow me to use a dry bag on my Grom instead of a backpack on my poor back. Here in America, the aftermarket support for the new generation of Honda Groms is poorly developed. I was very happy to find Web!ke had luggage racks for the new Grom. I chose the G-craft because it looked like it would mount my bag easily. The shipping was very fast and it arrived ahead of schedule. The luggage rack is of high quality with precise CNC machined parts and good powder coating. The instructions for assembly are in Japanese but I found it very easy to figure out even though I don't speak Japanese. Overall, I would highly recommend this luggage rack to anyone. View detail
g-craft rear carrier
Unlike the h2c product, I chose the Zcraft product because I can use the back seat and load luggage Unlike the h2c product, the back seat can be used and luggage can be loaded, so I chose the Gcraft product. Received it and it is sturdy and well made. It is essential when carrying luggage or camping. Very easy to install and has a great design Highly recommended if you have a rear carrier in Grom. View detail
I wanted a little more load bearing capacity.
As for installation, it is easy to understand if you look closely at the Illustration.
If you remove the Plastic Blind on the side of the Seat, you will see the M8 Female Screw on the Seat rail, and simply fasten it with Bolt through the attached collars in 4 places.
The carriers are narrowed backward from the width of the rear edge of the Seat and extended at the same height as the Seat, so that a small type Seat bag can be installed without any problem, and a slightly large type bag can be fixed depending on your ingenuity.
However, the load capacity is limited to 3 kg, so care may be required when placing very heavy objects on it.
The Carrier and Bracket are made of iron and painted black, but I think it is probably a baked-on paint with strength.
The collar between the Bracket and the Seat rail is Material:The M8 Bolt that holds the Bracket is Stainless Steel, but the Bolt that holds the Washer, Bracket and CarrierBody is Plating.
I prepared Stainless Steel Black painted Bolts to match the Black Carrier.
The silhouette is not a typical "carrier" silhouette, but rather a natural, backward design that extends smoothly and naturally.
In detail, on the top surface of the Carrier Gcraft" The product had a Laser engraving of "L", and I liked the fact that they did not cut corners.
View detail
super quick shipping, awesome rack
I received the package within 5 days of ordering, shipped to my door, well packaged, the rack is high quality, well designed, easy to install and fits my 2022 Grom. I love the look, it's the perfect size. I will definitely order parts from japan web bike again bc canada View detail
Satisfied
It took about 5 days to receive it. I ordered it from another place, but it didn't arrive for over 2 months, so I canceled it and purchased it from Webike. The price is a bit high, but the delivery is quite fast and the product seems to be well packaged. I want to wear it. I'll listen to it often. Sell a lot. It took me 5 days to receive it. I ordered it elsewhere, but it didn't arrive for over 2 months, so I canceled it. I bought it from Webike. The price is a bit high Delivery is very fast and the product seems to be well packaged. I want to install it sell a lot View detail
Generally satisfactory, but you need to be careful not to pinch your fingers.
The design is also very firm, so I think it's suitable for putting a seat bag on it.
Easy to install. The function is perfect.
Two things I thought were subtle.
You can't use it as a Grab Bar. The Grab Bar is sold separately.
The gap between the plate and the body is too narrow, and when closing the seat, do not hold the side of the seat.
Although there are not many choices for the Grom (JC92) Carrier, I think it is a satisfactory product considering its intended use.
View detail
Easy to install on my 2022 GROM
Webbike delivered this to my door in BC, Canada in record speed, the rack is exactly what I was looking for. Looks great on the bike, I am so happy with it, Thank you Webike! View detail
It would be better if the load capacity was a little higher.
The Endurance Rear Carrier was sold out, so I bought this one.
Installation was very easy.
The load capacity of this product is 3kg, but I usually use it with a 3.8kg top case on it.
So far I haven't had any problems with it being overloaded, but it does make me a little nervous when I'm on a long distance tour…
By the way, when you install the UniversalBase of GIVI's Top case, you can install it in the Center part of the carrier.
Note that when you try to remove the Seat from the car body, it will interfere with the Base and you will not be able to remove it.
We recommend that you install it as far back in the carrier as possible. (However, the center of gravity will be more rearward, so the load on the carrier will be higher, but…)
View detail
It was exactly what I expected.
I decided to use GCraft's Rear Carrier, which is more compact and cheaper than the OEM product. The installation is not particularly difficult, and I am using it by installing the Top case of 40L. In daily commuting, I put a Backpack of about 3kg in the Top case, but I am satisfied that the Top case can be fixed firmly without anxiety that it rattles or comes off.
Even if you remove the Top case, it looks nice and neat.
View detail
G-Craft G-Craft GCraft Rear Carrier
I bought it because I liked the design, and when I installed it, the design was exactly as I wanted it to be, and I'm glad I bought it.
I think it would have been better if it was a little larger.
I'm a little nervous about the 3kg load capacity, which is the same as HondaOEM's, but I want to use it so that it doesn't put too much strain on the frame.
View detail
Easy to install
I bought this to install a GIVI top case. The installation was very easy and although I have attached an instruction manual, you don't need to look at it to install it. Thanks to your help, I was able to install the GIVI top case as planned.
The only drawback is that you have to tighten the seat rail with bolt to fix the plate, but if you are not careful when you install the seat, you might hurt your finger between the seat and the side plate. If you are not careful when you install the seat, you may hurt your finger between the seat and the side plate.
View detail
Recommendation
I don't plan to put any packages or boxes on it, but it looks cool, so I installed it
If you do a cover on the reverse side, it will be a simple Fender and a mud splash measure.
View detail
Good stuff
The texture of the Aluminum Cut-Out makes you want to own it
Because it is smaller than the OEM carrier, it is Refreshing around the rear
However, I think it's a tough one to carry luggage on
FashionItems
Installation is pretty cumbersome, but the accuracy is perfect for that! That's what GCraft is all about
The only thing that would have been nice is if the GCraft stamp was reversed backwards and forwards
View detail