Reviews
Purchased to install a BOX.
Installation is easy if you follow the instruction manual, and the helmet holder is also included. View detail
I am satisfied
I had a GORILLA until I bought the MONKEY125, and I wanted to get closer to the Classical Image, so I bought this product. I am happy with my purchase. View detail
Beautiful product
[How is it used?
Attached to Multi Wing Carrier.
Was the one you received as per Image?
Very nicely cut out Rubber sheet.
Was the installation difficult?
Please peel off the release paper little by little according to the Instruction Manual. I had a hard time peeling it off all at once.
How was your experience with it?
I put a small cold box on the Carrier and it did not scratch the Carrier.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
None in particular
View detail
It's best
Because it is small in size, it seems difficult to lift luggage.
The quality is good and the overall balance seems good.
It creates a pretty look and looks better than when it was original.
It cannot be installed on the Ape 100 seat and fits perfectly on the Ape 50 seat.
Thank you for the fast delivery. -------------------------------------------------- -------- Because it is small in size, it seems difficult to lift luggage. The quality is good and the overall balance seems good. It creates a pretty look and looks better than when it was original. It cannot be installed on the Ape 100 seat and fits perfectly on the Ape 50 seat. Thank you for the fast delivery. Powered by Google Translator
View detail
Fits: HUSQVARNA SVARTPILEN 401, HUSQVARNA VITPILEN 401, HUSQVARNA SVARTPILEN 200, HUSQVARNA SVARTPILEN 125, HUSQVARNA SVARTPILEN 250
The best choice for waterproof bag storage
It was useful during long distance tours.
Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters.
The design is simple, so it doesn't look too distracting.
Both 1st and 2nd generation fillens can be used. -------------------------------------------------- -------- It was useful during long distance tours. Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters. The design is simple, so it doesn't look too distracting. Both 1st and 2nd generation fillens can be used. Powered by Google Translator
View detail
It is a solid making
When installing, it was a bit of a hassle to assemble the auxiliary fixture to remove and attach the Rear Fender, but other than that, it was easy.
It is well made and useful.
View detail
KIJIMA Assist Carrier
The assist carrier feels like its a "stock" option of the z650rs, fits the bike perfectly. The paint on the metal is very similar to the frame of the motorcycle, though the welding can be improved, i notice some rough portions on the welded parts. Installing is easy and the diagram is clear.And to those who are wondering if the passenger will feel the metal on the side of the carrier, its not going to impede the sitting position of the passenger and can be used as grab rails, all in all, a good product. View detail
Fits: BMW R nineT, BMW R nineT Urban G/S, BMW R nineT scrambler, BMW R nineT Racer, BMW R nineT Pure
UrbanGSParis-Dakarization
I wanted to add a top case, so I did. It looks good and sturdy. View detail
Kawasaki genuine Rear Rack
This is the genuine Kawasaki Rear Rack that everyone knows. This is for people who value appearance. The loading area is narrow and has a trapezoidal shape when viewed from above, so you may need to be creative when loading larger items. If you often go on long touring trips, we recommend bikes from other manufacturers (Daytona and SP). I only use it for commuting, so I'm very satisfied with this. ---------------------------------------------------------- This is the genuine Kawasaki Rear Rack that everyone knows. This is for people who value appearance. The loading area is narrow and has a trapezoidal shape when viewed from above, so you may need to be creative when loading larger items. If you often go on long touring trips, we recommend bikes from other manufacturers (Daytona and SP). I only use it for commuting, so I'm very satisfied with this. Powered by Google Translator View detail
ninja400 2018 Rear Carrier
[How is it used?
Install SeatBack
Was the one you received as per Image?
Street Image
How was your experience with it?
Is good
[Points to note]
It might be better to have someone from Support to do the installation.
How did it compare to other products?
I don't know, I haven't compared.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
EnduranceRear Carrier for GROM late model
Installation is very simple:remove the Seat, push out the four hidden hole caps, and attach them there with the included screws.
Furthermore, the optional Helmet holder can be attached to the Carrier.
The Rear Carrier fills the empty space at the rear of the GROM and has a good design. The load capacity is 8Kg, which is stronger and more practical than the Honda OEM product. It was a good decision to buy it.
View detail
Installation review
The original luggage rack was too big, so I bought it to replace it. It was easy to install and the overall finish was good. It would be nice to have a seat that fits perfectly.
After replacing it, it is compact and pretty. It says the load is 5kg, but I wonder if tandem doesn't work ------------------------------- --------------------------- The original luggage rack was too big, so I bought it to replace it. It was easy to install and the overall finish was good. It would be nice to have a seat that fits perfectly. After replacing it, it is compact and pretty. It says the load is 5kg, but I wonder if tandem doesn't work. Powered by Google Translate
View detail
Tandem seat can be installed with Compact
The paint texture is also high, making it Compact and Stylish.
I am satisfied with the rigidity of the Carrier and its use for Tandem.
View detail
Easy to install
Installation is really easy, taking less than 10 minutes. The texture is good, and the Pipe on the thick body is a nice parenthesis. If I have one complaint, it is that it is not designed to be installed with a helmet holder, even though it is an Endurance Carrier. Other than that, I am satisfied. View detail
Daytona rack
Superb quality.Superb qualitySuperb qualitySuperb qualitySuperb qualitySuperb qualitySuperb qualitySuperb quality View detail
Love it!
In a world where it's impossible to find rear luggage racks for Honda Metropolitans this product worked great!! I did need to drill one hole in the body of my scooter but it didn't matter it was worth getting a luggage rack! View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-S125
I am satisfied with the quick delivery and excellent quality!!
I am satisfied with the quick delivery and excellent quality. After installing the product, it looks great. In the future, we will consider various things about what to load on the carrier. We ask that you continue to make good products. However, one thing I would like to ask is that the maximum allowable load is 8KG, so I would like to increase this a little more. If you attach a top box to the carrier, I think it may require more weight. -------------------------------------------------- -------- I am satisfied with the quick delivery and excellent quality. After installing the product, it looks great. In the future, we will consider various things about what to load on the carrier. We ask that you continue to make good products. However, one thing I would like to ask is that the maximum allowable load is 8KG, so I would like to increase this a little more. If you attach a top box to the carrier, I think it may require more weight. Powered by Google Translator View detail
Gusseted and safe to use.
It has a GIVI Box weighing about 3 kg and is used to load shopping.
Gross weight of 8 kg giri (Sensation) There is no particular problem, although there are occasional instances where it becomes
The material is solid when pressed down, the material is reasonably thick, and the welds are beautifully well welded, so it is safe to use.
View detail
I feel having a factory Honda rear rack on the Monkey 125 is the best choice for aesthetics
About quality and texture - The rear rack from Honda is made from pieces of flat bar and steel tube with precision bents that are TIG welded together and plated with a chrome surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - I feel having a factory Honda rear rack on the Monkey 125 is the best choice for aesthetics but when it comes to practicality this is not the case due to it's small cargo bed dimensions but really it'd all about the look for me. Products to buy together - A key product to buy together with the rear rack for me was a fender eliminator as I wanted to add as much of the original Monkey Z50 styling back to the Monkey 125 and that started with removing unwanted black plastic parts. Difficulty of installation - The installation of the rear rack is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the rear rack to the frame. Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and their rear rack is no different. About shipping and packaging - With there being a no significant cost difference between sea freight and EMS for the rear rack, I chose sea EMS for an earlier arrival date as I was in no particular rush to install the product. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, when purchasing a special factory Honda product like this, it is best to do so from Webike Japan. There are a few local stores selling parts for the Monkey 125 but the product is not available. View detail
สินค้าถูกจัดเตรียม และ ส่งออกมาได้อย่างรวดเร็ว ของมาถึงเร็วมาก แพ็คเกจหนาแน่น ไม่ได้รับความเสียหายใดใด ตัวสินค้าสวยงาม ราคาเหมาะสม เล็กกระทัดรัด รูปทรงสวยงาม View detail