Reviews
Even though it's only for car models ….
I purchased it specifically for my car model, but could not install it without modifications. View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250L
inaccurate
The welding was inaccurate, and some parts were joined at an angle so that they could not be attached properly. In order to attach the bolt even if the bolt was tilted, the bolt hole in the carrier was widened forcibly, and the bolt could be attached.
It looks like they don't do dimensional inspection after welding.
View detail
Quantity:Pair (for Left and Right) asymmetry
The welding position of the right bracket is gapped for the price, and I had to force it on a little. View detail
Balance of quality and price...
[How is it used?
My friend's younger brother bought a new SEROW250Final edition without a rear carrier. "Let's go buy the parts we want to install!" I went to the Motorcycle Accessories store where I went and bought this Rear Carrier because it was the only one they had in stock.
Was the one you received as per Image?
In hindsight, I could have chosen many things including design etc. if I had chosen at Webike... or rather, my friend and I did. You might as well pick one from Webike's or mail order, right?" I advised him to do so. I want to buy the parts I want and install them right away." and Tension seemed to be higher. I'd rather buy something now than wait a little." I was forced to do it like that.
Rear Carrier functional parts are working fine.
Was the installation difficult?
As mentioned in others' Reviews. Can be used with OEM Assist Grip. In reality, however, the clearance between the Assist Grip and the Carrier Bracket is too narrow to allow for easy access, so modification is required.
In this sense, it is difficult to install, but if you give up the Assist Grip installation, the difficulty will be reduced (the bolt length is also included in the package and is large and strong).
How was your experience with it?
As mentioned above, there is no problem with the functional part as a Rear Carrier, and the box can be installed.
but the Design is It's like a sturdier version of Carrier for Motorcycle." I'm too plain with my...
Moreover, the Gold amount is not one of the cheapest, and to tell you the truth. If I was willing to pay this amount of Gold, I would choose a Carrier from another company with better parenthesis. It's like
[Included Parts:were they on?
The CarrierBody, collar and bolt necessary for installation are included in the package, so if you do not use the Assist Grip, you can install the CarrierBody with this product alone. (If you use the Assist Grip, you will need a collar of appropriate thickness and a longer bolt to accommodate the additional thickness.)
[Was there anything that disappointed you?
Price and Design・・・・It is hard to say how much people like the look of the product, but I think the position of the Assist Grip, which makes it difficult to use if it is attached as it is, is not well thought out for a product that costs this much in gold.
Other items that would be helpful
Point and hang of installation
If the base for the box is to be installed from the beginning, it is better to install the base on the carrier before installing the rear carrier on the car body, so that the work can be done smoothly.
[Availability and clarity of the Instruction Manual
It is an easy-to-understand product.
[Notes]
As I have already mentioned above, there are some points to note when installing the OEMAssist Grip and the Bolt mounting holes are slightly gapped (individual difference range?). It is safer to do a temporary assembly in advance.
[ITEMS TO BUY TOGETHER
If you plan to install the Rear box, it is easier to purchase it together and install the Base first.
[Opinions and requests to Manufacturer
It would be helpful if you could improve the accuracy of the product... or lower the price.
View detail
solid construction
The price is higher than other manufacturers' products, but the construction is solid. Installation is easy, but I almost missed the included bolt and collar, which are located at the bottom of the box, under the cushioning material. View detail
Fits: KTM 390DUKE, KTM 250DUKE
Mounting Large change!
It could not be installed as is.
I was able to install it successfully after referring to the earlier example of installation.
Spacer in the case of DUKE390 required an additional 4mm.
I added a Spacer to the back Left Side and was able to install it.
Thank you for your word of mouth.
View detail
Fits: KTM 390DUKE, KTM 250DUKE
It won't stick as it is!
This product is manufactured overseas on an overseas manufactured Motorcycle. The dimensions do not match so well that it makes me cry.
The attached collar (Spacer 20mm) is attached to the Grab Bar (Option) hole on the MotorcycleBody.:Pair (for Left and Right) Before and after
The GIVIMono-lock base hole does not fit if the GIVIMono-lock base hole is left as is. However, the GIVIMono-lock base hole did not fit if the base was attached as it was. After much trial and error, I managed to attach the base by adding an 8mm collar to the back of the left side.
Once installed, the rest is very Parenthesis-like.
Since there are individual differences, please try to install them by utilizing the Spacer or Washer you have on hand.
As adVise, everything is tentatively assembled⇒Bolt hole positioning⇒Washer+Spacer utilization⇒Bolt main tightening. In.
Unlike FOR JAPAN MODELOEM Parts. Without getting angry," without getting frustrated. is hang.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250L
Large is just right, but...
The large size is just right, but the load capacity is 2?
I was only concerned about the Large size and didn't read the product description carefully.
I'm sorry, but if I put a SeatBack with a little larger size, I can't put anything in the 2?
If it is this large, steel, and has a load capacity of 5kg, I would love to have it again.
However, the welding etc. is good, so it might actually be good for about 5?
I'll give it a try.
View detail
Might need some rust protection.
Less than a year after purchase and installation, the rust was terrible.
The Plating on the car body is not rusty so I think it is a Plating quality issue.
It's a pity because the shape is not bad.
I'm currently using one from another Manufacturer that was painted in OEM colors by a paint shop.
View detail
Fits: HONDA FORZA 300, HONDA Forza 125 - 300cc, HONDA FORZA 125, HONDA Forza (MF13E), HONDA Forza (MF13E)
Quantity:Pair (for Left and Right) Not finished symmetrically.
The impression in my hand was a product that felt heavy and strong.
When I temporarily attached it to the Grab Bar and placed the GIVIMono-lock baseM5M on it, the Bolt holes do not align at all. 'Isn't the M5M compatible with this Bracket? When I purchased the product, I confirmed that it would be compatible with this product, so I loosened the temporary Bolt (hand-tightened) until it floated about 5mm from the Bracket, placed the Base, and lightly tightened the Mounting Bolt. After that, I tightened the bracket body, but the other side to install is Material.:With Aluminum Grab Bar, Mono-lock base is Material:Plastic。 "Isn't one of them going to break? I tightened it while thinking. For the time being, there is a response that I was able to tighten it, but the Quantity:Pair (for Left and Right) The gap between the two is different. From the back of the car, it looks like Center, but from the top, it looks like Quantity.:Pair (for Left and Right) The BracketBody is very strong, so I don't expect it to get used to it. I don't know if it will get used to it or if it will break. (eh?)
View detail
Different tastes.
Please note that the spec. is to be fixed with 3 cap bolts.
It has a load capacity of 3kg, but I don't think you should put a top case on it. It has many hooks, so it is best for small and light luggage. It is better to think of it as an extra ....
The paint quality is okay with powder coating, but the welding is rough.
View detail
DAX6v
I'm wondering if you don't notice that the plating is already peeling off during the inspection process. I would not have bought it if it was brand new and the plating was already peeling off.
I don't think you should buy it, folks.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L
It's expensive.
The rust is already starting to appear.
The price is too high based on material and construction.
The Installation Manual for installation is also quite unfriendly in some respects.
Ahhhhhhhhhh!
View detail
I don't recommend it.
After about a year or so of use, the mounting Bracket had ruptured and the Carrier was bouncing around behind me.
When I contacted Ruff & Road, I received the answer that the FTR223 breaks because of the Large vibration.
I've been using it for about a year and only ride it about twice a month and it's really bad.
I bought a new Bracket and am reusing it, but I'm not sure if I'll use it if it breaks.
It has a load capacity of 2 kg, so it's almost impossible to carry anything on it.
I hope they develop a product that can be used in a neat way.
View detail
Loading capacity 8kg？
* There is no such thing as a Tandem that weighs less than 8kg, do you know what that means?
An excerpt from the product description
Please do not exceed the load capacity (Maximum load capacity includes a Helmet holder, etc., attached to the Carrier The weight of everything is included.)
Honda OEM Tandem seat can be installed
By purchasing a Honda OEM Tandem seat separately, the seat can be easily installed and removed without tools It's done
It is both comfortable for Tandem and easy to use as a cargo bed
With a tandem grip, which is essential for a two-passenger car
The Grab is useful for Tandem, handling the vehicle and securing the luggage, etc It is equipped with a bar for peace of mind
View detail
Fits: HONDA FORZA(MF10)
MF10 drilling is required
Hmmm, no need to drill holes in the Fender or anything 。 View detail
Too much accuracy
I've never had this happen with any Parts I've bought, but all the Mounting Bolt No matter how I try No matter how I try.1,Quantity:2pc. I used it without the Set on, but I took it off immediately I will never buy this Manufacturer's Parts again View detail
Fits: YAMAHA JOG APRIO, YAMAHA JOG APRIO, YAMAHA JOG APRIO
Well, that's something
It's like they just put the material on a jig and welded it together
Ponting is far from it
It's a Level product with a do-it-yourself feel to it, which I think is a good thing
View detail
Fits: YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA MT03
It's not strong enough!
The shape and design are good, but within a year, the place where it's installed is Right Both Side and Left Side have broken off So I had no choice but to remove it I changed to the OEM Carrier because the OEM Carrier is more reliable and safe to ride I did View detail
Not amateptic to amateur.
DAYTONA Carrier Installation is trusted for the third unit and purchased.
Type was the first time I had to process Side cover of car body.
Attention is necessary for purchase because it can not be installed without some processing tools. In the handling Instruction Manual, it is written to bring it to a specialty shop. I worked with Cutter's blade attached to Solder.
It is attractive that GIVIBOX can be attached, but one position that can be installed. I think that it is a problem of Balance, but if you can not see it a little more, Tandem will be hard to do.
I do not like too much that the carrier is not shifted above the Seat rather than the recently popular Seat and Flat carriers.
The only thing I'm happy about is that we can use the bar at the time we look around, and Edge's design at the time of CarrierSingle Body.
A gap will be opened between Seat and Side cover after processing. When I contacted Manufacturer, I was told that Large would be Large if it was rainy, but in the case of heavy rain it was said that rainwater might be able to penetrate. I do not know if there is no motivation because it is a Minor model, but I think selling itself is something.
Under Seat we purchased Waterproof Sponge purchased at Home center for storing documents and ETC equipment.
Side cover If you noticed various things before processing, I was making it as a carrier of another company Manufacturer.
View detail