Reviews
Installation requires modification.
As shown in the product image, the OEM Carrier cannot be attached to the Flat, but the DoubleCarrier is attached on top, so it cannot be used in combination with the Second seat.
Even when not used in combination, the OEM Carrier interferes with the system, so modification was required to install the system.
View detail
It could be one size larger.
The OEM Carrier is not bad, but it looks heavy, so we bought it for the reason of weight saving (since it is not used for camping). (We don't use it for Camping).
The weight reduction was about 3KG (from U-Tube), which is good, but the small type was a little bit larger after the replacement.
I replaced the Small TypeTouringBack, but it was just barely wide enough, and I thought that a slightly larger size would be more comfortable to use and look at.
*Width +30mm, Length +30mm (personal opinion)
If nimble driving is important to you and you don't need an OEM-installed Carrier, I think it would be a good idea to spend a little extra.
View detail
Rear Carrier with sv650EnduranceTandem grip
The product is very good.
When I put it on, I MATCH it to sv650.
The installation will be very hang.
I like it because of its solid construction. The price seems a little high.
View detail
Fits: HONDA Forza 250, HONDA CB300R, HONDA FORZA300, HONDA Forza350, HONDA Forza350
Rack for attaching Monokey base to MF17
I purchased this product for the purpose of installing a GIVI M7 FZSeries Monokey base 91332 on a FORZA MF17.
The installation itself is very easy and takes only a few minutes. However, the M7Base and the holes were not aligned, and the rack had to be modified by force to align the holes. I was surprised that the steel of the rack was quite soft and bent easily, but I managed to install it.
View detail
Endurance rear rack for c125
I bought this rack for my 2023 C125 Honda Super Cub. It fits perfectly! It’s very high quality and heavy duty. My only complaint was the price to get it shipped to the USA. It was very quick shipping. View detail
Fits: Vespa S150, Vespa S125, Vespa LX150, Vespa LXV, Vespa LX125
In good condition for installation.
Since there are two welds at the base of the fixing, you may have to be prepared to drop the Rear box when it breaks.
It looks rather sturdy, but I had to make the holes myself because the VESPA Plate could not be installed.
Then there's the durability
View detail
Y's Gear
It can be installed without hesitation.
The construction is sturdy and helpful.
View detail
OEM's sense of security ◎Evaluation depends on application?
■About Quality
There was no BALI, uneven paint, or Wobble, only HondaOEM.
About ■Design
I like it because of its simple, MINIMAL design, and I think it is good because it does not disturb the look of the car without the Rear box or Carrier base.
■ About performance
The largest load capacity is only 3 kg. If you want to put a large box, this product is not suitable for you. If you want to put a large box, this product is not for you.
About Pricing
As it is an OEM product and has undergone proper testing and development, it is inevitable that the price is a little high. This is not limited to Carrier, but it is for those who want to buy peace of mind, because the safety of using Carrier in Rule is an attraction that third-party products do not have.
View detail
Quantity:Pair (for Left and Right) asymmetry
The welding position of the right bracket is gapped for the price, and I had to force it on a little. View detail
Fits: YAMAHA SR500, YAMAHA SR400
The most natural atmosphere among side bag supports for SR400
There are various side bag supports for SR400, but Shim's Craft's side bag support feels comfortable when I put it on.
The front side uses a Seat Fixing Bolt, so it will be wobbly if the Seat is removed. When installing the rear side, it is easier to remove the License Plate.
View detail
Good design, good construction, highly recommended.
I had been avoiding Carrier because I didn't like its style, but I wanted to increase the load capacity for long tours, so I decided to purchase it.
After actually putting it on, it is still convenient to have it.
Fixing the SeatBack to the Carrier will give you room to fix the WaterproofBacketc. in front of it as well.
It is well made and well thought out where the Seat and the Seat are in the same groove.
I prefer Style without it, but not so much that I would remove it when I don't use it,
It is left on.
View detail
Fits: KAWASAKI Z H2
Please purchase with your Motorcycle purchase!
I used a Tanax Mini Field Seat Bag in the extended state, and when I tightened the KSystemBelt, thinking that I didn't want the bag to fall or move, the Seat was stuck in the Bag and the Fastener handle rubbed against the Tail cover (Tail cowl) when it was extended and scratched the bag. I am sorry, of course, that I neglected to take measures to prevent scratches. Of course, it is my fault for neglecting to take measures to prevent scratches.
If you think about it, I think the Bag capacity was reduced by dizzying it and it didn't fit, and if you stuffed it in, the Bag sagged because it was too heavy, and as a result, it got scratched.
If you have the Speed Rack, you can attach it tightly with the capacity as it is. I put SHAD's Top case on mine rather than a bag, and it's comfortable. It is comfortable and a helmet fits in it. If you are an owner who can attach it to your motorcycle without carrying luggage on your back, I recommend you to buy it immediately.
It seems to be Large sturdy up and down and front and back, even if it rattles around on AsphaltRepair marks and bumps when used. The only thing is that the Quantity:Pair (for Left and Right) The Plate itself is heavy and solid.
The rest is Large sturdy if you are careful to run the Bag and Case and the weight of the luggage against the allowable load capacity.
I was struggling when I put on the Songe and installed it, and the Green paint on the Frame where it hooks in the front was scraped off.
View detail
Fits: HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Is it heavy?
It seemed to be out of stock for a long time and I had forgotten I had purchased it, but it arrived suddenly.
Without Carrier but with de Fault's Hook and Roc STRAP
Drum bag (The NorthFace BCDuffelS) was enough to carry about
There was no inconvenience.
My first impression upon opening the package was. Carriers are heavy.
That must be troubling for those of us who work to reduce weight.
I received it! So I installed it.
Products are highly accurate, no need to apply force to fit, etc.
Can be installed in 10 minutes.
View detail
Is good
The OEM Carrier was too large for my needs, so I waited for a commercial product and tried it on right away. View detail
thick
It will be a handlebar that is solid and easy to maneuver around the vehicle. View detail
No problem even with heavy objects
It takes a little time to install, and if the Rear Suspension is removed, it is Large sturdy.
I wanted to put a slightly larger backpack on it, so I went with this one. 6 kg is plenty of room.
View detail
Purchased because I was going to Camping
I bought it because I had to go camping on short notice.
YamahaLANZA.
It was difficult to fit the screw holes for installation, but I managed to install it. If so, I would like you to think about making the mounting holes more flexible (long holes) or something.
I haven't used it with a load yet, but I was concerned that the surface would fog up if I touched it with a slightly dirty glove or something. (Well, it's okay if you polish it.)
Both SIDE stoppers were installed facing down because the width of the load would be restricted if they were installed according to the instruction manual.
It looks good because Parenthesis is good.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY
แร็คท้ายดำสั้น takegawa ใครชอบดำแนะนำครับ เวลาใส่จะสั้นกว่าของเดิมติดรถใส่แล้วสวยครับท้ายจะสั้น แข็งแรงในระดับหนึ่งครับเพราะเป็นอลู View detail
Fits: HUSQVARNA SVARTPILEN 401, HUSQVARNA VITPILEN 401, HUSQVARNA SVARTPILEN 200, HUSQVARNA SVARTPILEN 125, HUSQVARNA SVARTPILEN 250
Thanks to the designer for bringing us this product, which makes the luggage almost integrated with the car
It is very easy to use. It was very cumbersome to tie the tail bag in the back seat before, but now it is much easier. It can make it easier for the car to carry large luggage, and the material feels solid. Although the freight is expensive, it is worth it ----------------------------------------- ---------------- Very easy to use, the previous rear seats were extremely tedious, and now it is much easier. It can make the car carry a large piece of luggage easier, and it feels very solid. Although the freight is very expensive, it is worth it Powered by Google Translator View detail
It looks strong
I thought it would be difficult to install this type of rear rack because of the defect rate, but fortunately, it was installed without any problems. Unlike how it looks, the allowable kg is low, so I think I need to put up light luggage View detail