Reviews
good
very good. I want to the Q5KYSK089E04 is very lond time . but we have a webike.hk . So .. My dream is real ture. haha . have a nice day View detail
Fits: YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker
sure enough
I think the quality is good because it is a product of Y's Gear. It is difficult to install this product if you only own a Wrench. At least Wrench, Ratchet, Tie Wrap, and Nipper are necessary. The quality is good, so I am satisfied with the cost performance. However, I think the load limit cannot be relied upon in a good way. I think so. View detail
Y's Gear
It can be installed without hesitation.
The construction is sturdy and helpful.
View detail
Great trunk for a trunk
About quality and texture
The trunk was bought to install a wardrobe trunk, since it was absent from the factory, excellent quality of the metal, the quality of painting is also on top, black semi-gloss color, the coating looks durable
I would also like to note the presence of fasteners in the kit, which also has a great look and quality.
About the feeling of use
The original trunk is installed in a regular place without any problems, absolutely all the holes fit perfectly into the threads on the rear of the frame
4 bolts included, no thread problems found, easy to screw in
Products to buy together
The kit includes everything you need, all four screws and the trunk itself
Difficulty of installation
Very easy installation to the right place, you just need to tighten the screws
Cost performance and comparison with other products
The price is not low, but even high, but there are no other options, only the original spare part
About shipping and packaging
The packaging can be seen in the photo, the bag with air bubbles, there was no damage during delivery
Any concerns, cautions, or advice when purchasing
I can definitely recommend this trunk, since there are no duplicates, and it will not work otherwise to install a wardrobe trunk or other box for transportation, the quality is very high, this is an original spare part!
-------------------------------------------------- -------- About Quality and Texture The trunk was bought for the installation of coffee, since it was absent from the factory, the excellent quality of the metal, the quality of the painting is also at a height, the black half -material color, the coating looks firmly I also want to note the presence of fasteners in the kit, which also has a wonderful look and quality ABOUT THE FEELING OF USE The original trunk is installed in a regular place without problems, absolutely all holes are perfectly fitted to threads on the back of the frame 4 bolts in the kit, no problems with threads were found, it is easily twisted Products to Buy Together The kit has everything you need, all four screws and the trunk itself Difficulty of Installation A very simple installation in the right place, you just need to tighten the screws COST Performance and Comparison with Other Products The price is not low, but even high, but there are no other options, only the original spare part ABOUT SHIPPing and PACKAGING The packaging can be seen in the photo, a package with air bubbles, damage during delivery did not occur Any Concerns, Countions, or Advice When Purchacing I can definitely recommend this trunk, since there is no duplicate, and it will not work to install coffee or other boxing for transportation, the quality is very high, this is an original spare part! Powered by Google Translator
View detail
Rear Carrier
I was a little worried because I had to tighten it by hand because there was a Torque and I did not have a Torque wrench. View detail
No problem
Installed on a 22 SEJ6J
Price is normal
Easy installation by simply attaching 4 Bolt
Nothing wrong with the performance, it's just great!
Top case is Endurance's GSX250R Rear Carrier+Top caseQuantity:Transplant of KMAX30 attached to Set
KMAX30 installed Base with no problems
There is only about 1.5 kg of load space in the 30LCase, but even if I ignore it and load it up, so far there is no rattling or shaking etc. even when driving on bad road surfaces, but that's probably the limit.
I think 50L is questionable.
View detail
Sturdy rear shelf
My motorcycle is YAMAHA NMAX155, which I usually need to carry in winter, so I plan to install the tail box. The rear shelf of this YAMAHA is made by the original factory, and its fit and robustness are guaranteed. The installation is also easy and you can install it by yourself。 View detail
MT07 special shelf
My motorcycle is YAMAHA MT07. This motorcycle has no storage space. Sometimes I need to carry some items, which is not very convenient, so I ordered this original YAMAHA rear shelf on webike. This aluminum alloy rear shelf The shelf is specially designed in accordance with the style of the vehicle. It can be installed directly without modification, and it is very convenient to install and disassemble. It should be noted that the tail box can only be installed with the original Yamaha tail box, and other boxes are not supported. -------------------------------------------------- -------- My motorcycle is YAMAHA MT07. There is no storage space for this motorcycle. Sometimes I need to be equipped with some items. Shelf is specially designed in line with the vehicle style. changes, and it is very convenient to install and disassemble. It should be noted that the tail box can only be installed in the original tail box of Yamaha, and other boxes are not supported. Powered by Google Translator View detail
Installed immediately after delivery.
I purchased this to install a WorldWalk Box that was used on my previous vehicle. By the way, the old VINO has a refueling port on the Rear, so I wonder how people with the Box are refueling.
Now, this product is a dedicated product and is well made. Even though there is a slight price difference, I am glad that I purchased this product because it gives me a different sense of security. No special modification was required, and even without special tools, I was able to install it easily.
One thing I was worried about before I bought it. If I use the Carrier alone, I can grab the Carrier and pull it up instead of the grab bar when setting up the Center Stand, but with the box attached, where do I hold it? But with a box, where do you hold the Carrier? But as you can see in the picture, the Carrier has a handle sticking out on the Left Side below the box, so the Center Stand can be stood without any problem at all.
The VINO has enough space under the seat to hold a full face helmet, but I would like to have more space to carry a sign issuance certificate, a rain jacket, and wetties for BirdAttack (bird poop). I know people often say they don't like the way it looks, but I think it is for a Scooter, so I would like to recommend the Box.
View detail
stable shelf
My motorcycle is a YAMAHA NMAX155. The original factory of this car does not have a shelf and cannot be equipped with a tail box, so I bought this YAMAHA original rear shelf on webike. This rear shelf is made in Thailand, and the original handrail needs to be removed when installing it. It is relatively easy to install the upper cover of the tail light, and the tail box can only be matched with the original 30L or 39L tail box of YAMAHA. -------------------------------------------------- -------- When my motorcycle is Yamaha Nmax155, there is no rack in this car that cannot be equipped with a tail box, so I bought this Yamaha original shelves on Webike. It is easier to install with the upper cover of the taillights. The tail box can only be paired with Yamaha's original 30L or 39L tail box. Powered by Google Translator View detail
You might have trouble with how to install Shim.
Since it's an OEM Product, it's not perfect … some of the color floats and it's not easy to get it right while driving. Caracalla and making noise.
Perhaps it could be the bend in the Carrier from which it was installed.
Basically, I am satisfied with the Helmet because it can be placed stably and can now carry Large type luggage.
View detail
It was perfect.
The back side of the Bracket interferes a little with the Cowl, and if we cut the Bracket, it would not be strong enough, so we cut the Cowl a little with a File.
It's a good thing that it's a place where you can't see it even if you cut it off.
ScrewCover is a Rubber plate, so it is kinda like that. And the Rubber cover attachment pin is not good either, it would be chicer to stop it with the original Screw.
Overall, removing the OEMPillion Bar and replacing it with the Rear Carrier is only a little heavier in terms of weight.
OEMPillion Bar is heavy due to its strength.
View detail
strong shelf
My motorcycle is YAMAHA NMAX155, the space of this seat bucket is not enough, so I am going to install the tail box, this YAMAHA rear shelf is an original part, the fit and firmness are guaranteed, and the installation is also very simple, It can be installed by yourself. It should be noted that it can only install the original 30L and 39L boxes, and other brand tail boxes cannot be installed. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. This car bucket space is not enough, so I am going to install the tail box. This Yamaha rear shelves are the original parts, which are guaranteed. It can be installed by yourself. It should be noted that it can only install the original 30L and 39L boxes. Other brands of tail boxes cannot be installed. Powered by Google Translator View detail
sturdy shelf
My motorcycle is a yamaha SEROW250. Since the storage space of this car is almost no, I am going to install a shelf. After reading several models, I still feel that the original YAMAHA is reliable. This original shelf did not disappoint me. , The installation is simple and fits perfectly. The surface of the rear shelf is almost parallel to the surface of the cushion, allowing easy loading of large suitcases. The rear shelf top panel is also equipped with holes for mounting the rear luggage compartment floor. -------------------------------------------------- -------- My motorcycle is YAMAHA SEROW250. Since the car's storage space is almost not available, I am going to install a shelf. After watching several models, I still feel that Yamaha's original factory is reliable. , Simple installation , strict silk joints. The surface of the shelf is almost parallel to the surface of the cushion, which can easily load large luggage boxes. The top plate of the rear rack is also equipped with holes for the luggage bottom plate after installation. Powered by Google Translator View detail
Yamaha xmax special shelf
My motorcycle is a yamaha xmax300. Due to the need for long-distance motorcycle travel, the original xmax seat bucket space cannot accommodate luggage. This Yamaha original rear shelf is made very strong and can be installed with the original Yamaha matching tail box. To install the shelf, you need to disassemble the two original brackets, which is relatively simple and can be installed with tools. The webike delivery package is intact! -------------------------------------------------- -------- My motorcycle is YAMAHA XMAX300. Because the long -distance motorcycle travel is needed, the original XMAX barrel space cannot be installed. The rear shelves of this Yamaha original factory are very strong and can be installed with the original tail box of YAMAHA. The two brackets that need to be disassembled to install the shelves are relatively simple and can be installed with tools. Webike delivery is intact! Powered by Google Translator View detail
Installed on JOG 2BH-AY01 Basic
JOG 2BH-AY01 was able to be installed, although it is not stated to be compatible with JOG 2BH-AY01.
You're on your own.
The 8 included Screw Nuts + Driver and 10mm Spanner are all that is needed for installation.
I do not own a YamahaOEM U-shaped Lock that can be attached to the original Rear Carrier.
Not sure if it can be installed after this product is installed.
I think it is possible to install it in Honda TACT, which is probably the OEM research partner.
View detail
Great sturdy rack.
Overall this is a fantastic rack. Being a official Yamaha part it fits my 2008 XT250 (Serrow250) perfectly. It has low clearance above the rear fender, enough to get bungee straps under it but low enough to give it a fairly sleek look. Fit and finish are what you would expect for an offical part - the silver color perfectly matches the stock silver highlights on the bike. The tubular steel is very stiff and the rack feels secure and can hold about whatever you want to mount on it. There are less expensive racks out there, but I got this one for a couple reasons. - many aftermarket racks only use 2 of the 4 mounting points which gives a very unstable feeling. - this is the only rack I could find that has some style of built in passenger hand holds. I find this very useful for moving my bike around in my garage. It's not as comfortable as the stock passenger hand holds because it is made of square tubular steel instead of round, but it still gets the job done. Mounting is fairly straightforward, you need to remove the seat, side plastics, and loosen the rear light. It's not the most simple job but it can be done without unplugging any of the light harness. One tip I would suggest is to insert the included hole grommets before you mount the rack. I didn't and it was a major hassle getting them in with the rack on the bike and I wound up ruining one of them. The grommets fit very tightly, putting them in hot water before mounting really helps soften them for inserting. Shipping to the United States was very quick. Packaging was nothing special but it was secure and came here in perfect condition. View detail
Highly effective but time-consuming to install.
We purchased this product to install the Rear Carrier.
For other car models, some modifications to the Cowl are required to ensure rigidity, and we may ask a specialized store to do the modifications, but this product is not a problem. Almost. Can be installed with a pon.
It is true that some machining is required, but it is very simple and even easier than assembling a Plastic model.
However, since the Rear Grip had to be removed once for installation, the weight of this product added to the weight of the Rear Grip during installation, making the installation somewhat time-consuming.
However, as they are OEM parts, there were no gapping holes in the leek holes, and they were installed cleanly.
If you are considering Rear Carrier, we recommend that you purchase it without hesitation.
View detail
It feels right.
I was able to install it by myself, and I can't say enough about the hardness when screwing in the four Bolts.
Unlike Other Brand Products, there is a sense of security, which is limited to OEMParts.
View detail
Beautiful rack
The rack is really well made. It's durable and strong. Installation is a bit tricky and I recommend at least 2 people to install this but once it is installed it looks really good on the SR400. View detail