Reviews
Fewer options compared to CB1100
I purchased a CB1100RS Final edition, but the poor loadability is a Large problem that could lead to a decrease in my desire for Long touring. (This is my personal opinion.)
I thought I needed a rear box, so I started by looking for a current available carrier, but the OEM product was already discontinued during the CB sales period …HURRICANE had stopped accepting orders, etc. The only ones I could find were Endurance and Hepco, which are semi-OEM products. I found only Endurance or Hepco, which are semi-OEM products.
Once again, I felt the disparity between the recognition of the unbranded CB1100 and that of the late modelrs.
Personally, I liked the SMART look of the HepcoMini Rack better than the firmly design of the Endurance, but it's just too expensive.
…。
Also, the Painting was even and the welding was carefully done and satisfactory, but the accuracy of the installation seemed to be lacking.
Split Quantities:Pair (for Left and Right) After attaching the carrier bar to the body of the car, I put the rack plate on the car. (I almost got it by brute force.)
However, the fitted appearance is good!
The Seat is horizontally connected from the Seat almost horizontally, and it seems that even a large Seat bag can be used without any difficulty.
However, I have a GIVI that I unloaded from my previous Motorcycle and wanted to operate it! (at your own risk).
The Mini Rack has a few holes and gaps that can be utilized without modification. The weight capacity of the Mini Rack is up to 5 kg, so we will use it only to the extent that we do not put a load on it.
View detail
Moderate Large size
Installed in my wife's car 。 Bobber was chosen for its style, but he doesn't want to give up camping touring.
It is not large enough to hold a box, but I think this size is the limit for a Bobber style motorcycle, and it may be large enough to hold a bag. 。 Fixing to the vehicle body is done at the tips of the Parts and the Quantities near the PartsCenter.:Pair (for Left and Right) 4 locations in total at 。 The structure protrudes backward, and there is no support directly under the cargo area, so you can sense that it is not recommended to carry very heavy items. 。 In that sense, you shouldn't load a Box or anything like that.
I had it installed at the shop when I took delivery of my new Motorcycle, because I didn't want to damage it! 。 The structure around the PartsCenter is fixed to the reverse side of the Frame, so if I had done it myself, I probably would have damaged it somewhere.
View detail
Steady making
It is solidly made, and installation is easy by removing the Bolt from the Carrier.
It was easy to tighten the four bolts with the supplied Bolt.
The lower bolt is 13mm and the upper bolt is tightened with a Hexagonal Bolt.
45L Seat bag is a little bit small.
I flipped it over and installed it.
The fixation was done well.
View detail
Fits: KAWASAKI Z H2
Please purchase with your Motorcycle purchase!
I used a Tanax Mini Field Seat Bag in the extended state, and when I tightened the KSystemBelt, thinking that I didn't want the bag to fall or move, the Seat was stuck in the Bag and the Fastener handle rubbed against the Tail cover (Tail cowl) when it was extended and scratched the bag. I am sorry, of course, that I neglected to take measures to prevent scratches. Of course, it is my fault for neglecting to take measures to prevent scratches.
If you think about it, I think the Bag capacity was reduced by dizzying it and it didn't fit, and if you stuffed it in, the Bag sagged because it was too heavy, and as a result, it got scratched.
If you have the Speed Rack, you can attach it tightly with the capacity as it is. I put SHAD's Top case on mine rather than a bag, and it's comfortable. It is comfortable and a helmet fits in it. If you are an owner who can attach it to your motorcycle without carrying luggage on your back, I recommend you to buy it immediately.
It seems to be Large sturdy up and down and front and back, even if it rattles around on AsphaltRepair marks and bumps when used. The only thing is that the Quantity:Pair (for Left and Right) The Plate itself is heavy and solid.
The rest is Large sturdy if you are careful to run the Bag and Case and the weight of the luggage against the allowable load capacity.
I was struggling when I put on the Songe and installed it, and the Green paint on the Frame where it hooks in the front was scraped off.
View detail
Fits: KAWASAKI Z400, KAWASAKI Ninja 400, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Ninja 400
Good product!
Very good product
Now you can shop without Helmet. ( ?????? )
Tools are required for assembly and hang to remove the Case.
Once Snap is inserted to the deepest position, the key cannot be turned unless it is shifted slightly toward the front.
I don't know if it is written or not because the Manual is English Version.
Other than getting a bit hooked there, no problems.
View detail
We don't have a lot of options at this point.
I purchased it along with the SIDE Holder.
We have been using GIVI for the Rear box and wanted a Carrier for Rear that was also compatible with the GIVI box, but there were no options.
I thought I would buy a Pepco box if I couldn't install a GIVI Base, but I was able to install it with the Small modification.
It is a 47-liter box, but it was installed securely.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S950
Installation One-touch
I bought it for my BOX, and since I don't do tandem touring, I thought this would be fine. The box is a GIVI, so I had to drill a hole to attach the base. View detail
Fits: YAMAHA Tenere 700 Rally, YAMAHA Tenere 700, YAMAHA Tenere 700 World Raid, YAMAHA Tenere 700 World Rally
Increased loading.
I like the Hold feeling of the load.
It is easy to load, and the many holes allow for subtle positional adjustments.
View detail
Fits: HONDA CBR1000 RR Fireblade, HONDA CBR1000 RR FirebladeSP, HONDA CBR1000 RR FirebladeSP-2
poorly made
It will not lock if you just hold the rack down from the top. It will not lock unless you tap it down. When removing the rack, I use the key to remove it, but it does not turn firmly, and I am worried that the main key might be bent. It is obvious that the installation was not checked on the actual vehicle after manufacture. If the car is driven without noticing that the lock is not engaged, it will lift up and come off. View detail
Carrier
It covers Bobber's problem, loading capacity.
Now you can go on a sleepover Touring.
The texture is good and sturdy.
Recommendation to Bobber riders.
I think the installation is easy since it is Bolt On, but I have asked my dealer to do it for me…
View detail
Fits: YAMAHA MT-07
A quick turnaround?
It's really convenient for Solo camping. Just remove the Tandem seat and replace it with a large cargo bed. It is stable even if you put XL on it. The price is Neck, but if you go camping in 07, you can't leave it. View detail
Fits: KAWASAKI Z650, KAWASAKI Ninja 650
It's a shame that it's the only one and there's no competing product.
[How is it used?
The Ninja 650 is hopelessly unsuitable for loading (there is almost no place to put a loading hook).
On the other hand, I don't want to put Top case on Full Cowl (personal view).
Tandem seat is heaped up in 2020 and later MODEL, so Seat bag is not sitting well.
I want to install my TANAXSeatShellCase, Field Seat Bag and Side bag easily.
I was looking for a product that would satisfy my selfishness of wanting to keep it as a regular Tandem seat when not in use.
Was the installation difficult?
Installation Instruction Manual is in German and English version, but you don't need to read it because of the number of parts and appearance.
All you need is a 4 or 5mm HexaWrench and a 10mm Spanner.
How was your experience with it?
The seat is wide and flat, so the load is stable, but the problem is the holes around it.
The only way to use the belt is to fix the hooks.
I wanted to use the KBelt, so I modified HookPlate2 and installed it so that I could fasten the buckle.
The Rubber feet on the rack are very easy to remove (I almost lost them many times), so you should glue them separately!
Also, the seat lock is too tightly made (you have to press down hard to close it).
[Was there anything that disappointed you?
It takes a long time to deliver because it is Made In GERMANY (this time, I ordered and waited about one month)
The concept of the product is good, but the price of 27,000 yen is Neck, because there is no competitive product.
You can buy an OEMSeat for $1,000 … at least in the low 20,000s.
View detail
The only Rear Carrier on CampingSpec.
Rear Carrier for the Triumph BONNEVILLEBobber.
The Title of the product is "Top case holder. It says.
This is incorrect, Top case is not installable.
(Even the description section of the product states as much.)
There are individual differences in the accuracy of the workmanship of the Carrier, and there are some units that cannot be installed smoothly.
The seat is fixed at the base of the seat and the FrameRear, four places in total.
The flat part of the Carrier is about 20cm in both length and width.
The largest load capacity is 5kg, and there is a seal of caution on the side of the carrier.
However, when you install the actual product, you can feel the strength that makes you think that it can be more than 5kg.
(Including myself, loading more than 5kg is at User's own risk.
I use this carrier to go camping with Henry beguine's Seat bag DH-745.
For a BonnevilleBobber with virtually no load capacity, the
It's almost the only option if you want to put a Large-granular Rear bag on it.
So, although it is expensive, it is a really nice carrier.
View detail
Fits: YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT-03
Not fit for 2020 MT03
No fit for 2020 MT03 which is different from description. Description show it is fit, poor product description. Waste. View detail
Fits: KAWASAKI Ninja 1000 SX, KAWASAKI Ninja1000, KAWASAKI Ninja1000, KAWASAKI Ninja1000
I knew it, but I felt like I was in full view.
I have a Fender Eliminator installed on my car, so I can't install a rear carrier.
Nevertheless, mounting the SeatBack on the OEM Tandem seat is shapeless. It seems to be difficult to concentrate on driving.
Therefore, the Speed rack is the only choice that has been used in the previous car.
Since I was familiar with the structure of the Speed Rack, I had a feeling that the unique gouging of the Ninja 1000's RearCowl end was going to be the Neck.
But you can't replace a backbone, so I bought it anyway.
I see that there is a large gap after the installation.
As it is, rain and dust can get in as much as they want, so this gap treatment is an issue in the future.
Sponge tape is included but it is not enough as it is only one roll.
That's about the only thing that bothers me (is it deadly for long touring?). There is no weird rattling after installation, and it has a solid sense of rigidity, which I think is sufficient for practical use.
Because the base of the Tandem grip is close to the Cowl's seat surface, you should be careful not to hit the edge of the Speed rack when installing it.
The installation is simple, so you can follow the installation instruction manual. There is no translation (please input here or English version), so you have to look at the figure and interpret it.
You need to prepare OEM Cushion rubber separately before assembly.
You can remove 4 rubbers from the Tandem seat and transplant them, but if you don't feel comfortable replacing them every time you return to the Tandem seat, we recommend you to buy them separately.
Fasten the included Mounting Bracket to the Speed Rack Body (top panel) with Bolt & Nut. Attach the removed Cushion rubber and the assembly is complete.
All you have to do is replace the completed Speed Rack with the Tandem Seat.
While water intrusion protection is necessary, it is still convenient to have a Base easily set up for loading without breaking the Styling of the Ninja 1000.
View detail
Fits: KAWASAKI ZX-10R Ninja
Was good
The Tandem seat can be used as a rear rack for easy loading You can make
Style is not so good, so this is a very useful product if you don't mind that part
View detail
Fits: HONDA CBR300R
If you can enjoy processing as part of the customization process
It's hard to put a bag on the Pillion Seat because of its smallness and excitement, these days The concept of solving the loading problems associated with the Sports model & the concept of "hellip It is a good product But the build quality was still overseas quality
What made you decide to buy?
Move the Top case to the Pillion Seat instead of the Carrier, which is far from the center of gravity I was worried about how to process the normal seat because of the material etc For
How was your experience with it?
Advantages over Rear Carriers
It's not impossible to do it with the Rear Carrier, but it's much easier with no tools required It's easy to
When I see the box on the carrier of the car in front of me bouncing around, I feel a sense of stability and a hellip It's harrowing
There's plenty of room to spare considering the weight of a human being
Advantages over the normal seat
Flat Shape
Hard top panel
HookPoint
Was the installation difficult?
It arrived a little over a month after I ordered it, and I assembled it and now install it … I couldn't I was prepared for this, but when it is impossible to install it, it will be a shame I'll get back on my feet and look for the cause with Base only
The Hook is too wide
First of all, on the front side, the hook on the loop of the body frame is extremely wide and I shaved with File and rounded the corner at the same time If it looks well, Quantity:Pair (for Left and Right) The bend angle is different in the
The legs are too long
Hook is in, but this time it can't be pushed down to the locking position If you remove the legs, the lock will be engaged, which means the legs are too long Shave it off and check it against the body of the car, then adjust it so that the four legs are grounded at the same time as it locks, and then remove the legs I did
After working on the base up to this point (it took me three days), the next step is the top plate, but fortunately there were no deviations A few dents and slips etc. are well within the acceptable range
The attached Sponge is attached to the inner circumference of the car to accommodate the gap between the car and the body I cut the front side thinly around the Grab Bar It has a rubber sheet on it
【Please tell me the installation point and hang】
If the legs are too long and need to be shaved, lock them in place with the Rubber feet off and from the side Measure the amount of shaving by applying a Rubber foot Finally, the lock and four legs should be grounded at the same time so that the load is not applied to the lock only Vinyl Tape is useful for the fine adjustment of the over-sharpening
The rubber sheet is cut to match the shape of the front of the top plate, and is attached by shifting it by about 1cm It was
[Was the Instruction Manual easy to understand?
It's only available in English version and German, but you can understand it by looking at the picture If you have a junior high school student's level of reading comprehension, you will be able to understand Large You can
[Included Parts:were they on?
Bolts and nuts for assembly, Rubber feet, Sponge for sealing the gap, Hole in the top panel Cap and Emblem for attaching it to the top plate
There are other parts to deal with the gap on the front side, which are extremely A separate rubber sheet is available as I mentioned above because it is not easy to use
[Was there anything that disappointed you?
I thought Germany would be a little more accurate
Do you have any wishes or improvements you would like to make for the Manufacturer?
Check the product thoroughly before shipping
If you use it in such a way that you put the homsen box directly on it, the warp of the back end is in the way, so you can leave it flat or use it in a different way You'd better point it down or else
[Do you have any products to compare it to?
None for the one and only If I had to choose, I would say Rear Carrier
[Others]
The weight of the finished product is about 1.8kg Because the thickness of the top board is 5mm though it is Aluminum, it has a feeling of weight in its own way The front and rear length of the plane part is almost the same as the Normal seat seat, and it is the largest size of SHAD Base(SH48etc.) just fits in this size But Screw hole is not fit, so you need to drill it
I know it looks convenient, but what I'm still wondering about is the price I understand the effort to develop a fitting for each car type, but I would like to have more functionality It's a shame, because it would be easier to get your hands on them if they were cheaper
View detail
Fits: HONDA CBR650R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CB650R, HONDA CBR650R
Loading Capacity Up?
Even if you don't have this product, the CBR650R will have no trouble securing the bag, but it has a Homsen box I bought it because it looked like a white surface to do so
There are two holes in the back and the side of the body that are not in the picture It's available
I screwed two long eyes to the front side where there are no holes
View detail
Accuracy is not bad and Firmly attached
It's Made In GERMANY and has a bit of a Large taste, but it's easy to do without any weird processing It does not interfere with the Cowl, nor does it interfere with the Seat Unlike other products, Seat's closing is not affected It can be used as a HookPoint It's a bit expensive, but it's a good choice View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-R1000
The Rear Sets are now the loading space!
I'm using it to install GIVI's Mono-lockSeries!
The GSX-R1000R is an Other Brand Product, but also has a Rear Carrier Because it is not sold and Seat bag does not have enough carrying capacity and water proofing performance For large capacity loading & security & waterproofing, a rear box is installed Decision Purchased
The price is a little high, but when I installed it, Large processing is not necessary, and it is a little pompously installed I'm happy with the installation and Large variant!
As a general comment, there is no large wobble, and I can use Rear Sets and Carrier depending on my mood It only takes me a minute to make the switch
I don't want a permanent Carrier on a regular basis! I only need to use the tear box for touring This is very much a product of Recommendation if you're not!
(There is a slight reluctance when locking to the Rear Sets, so if you are concerned about it, the Rear rack side may need to be beveled a bit.)
Normally, in the case of the Rear Carriers like Pipe, the maximum loading weight is about 5kg Subtracting the weight of 5kg of the tear box, the weight of the load can be reduced by putting the tear box on the ground I guess it's fated to be in the mainstream state of Limit and not be able to put anything too heavy in it the..
In the case of Rear Sets replacement, there's no Risk to break, so I'm pretty comfortable with that!
When you put a heavy object on it, there is a possibility of damaging the lock part of Seat measure
Please refer to the following instructions for installation
When you install the Base of GIVI Mono-lock, you need to check the position of the hole on the Base side and the position of the base The holes on the rear rack side do not fit perfectly, so be careful
The two holes in the original and the Gold genus on the reverse side of the rear rack Replace the bolts holding the parts with GIVIBase parts and tighten them together (See the second image of the image)
It is necessary to fix the GIVIBase side of the Bolt 3 points, but the Bolt that comes to the Center In order to fix the top cover of the Base, you must turn the part where the screw holes are located into a Drill or Nipper Drilling process by using a (Image Quantity:1 Set of 4 pcs. See eyes)
? Plug the holes on the side of the rear rack that you are not using with appropriate tape (See the sixth image.)
Use three bolts attached to GIVI to fix the base and the rear rack
At this time, because it was judged that the wavy Plate of GIVIBase attachment was unnecessary, Home I installed a Washer purchased at center instead (Refer to the fifth image of the image)
? When you install it as it is, there will be a large gap between Seat Cowl and the side of the rear rack You will not
Because of the gap of about three centimeters, rain and dust can get in as much as they want, and if you work hard enough, you can take out the stuff inside Level, so it's a Waterproof Crevice Tape sold at Home Center (Thick Sponge that won't soak up water) Overlap and paste (Images 3 and 5.)
View detail