Reviews
YOSHIMURA Fender Eliminator Kit
Item arrived..super fast shipping.3 days arrived.check and all item is in order.never been disappointing.highly recommend.thank you team webike.awsome job.5 ⭐ View detail
Minimalist
This plate holder is really small and light. The cut-out monkey is very beautiful, I don't want to put my license plate on it! LED lighting is efficient. In France the plates are quite large and therefore hide the reflector and the sticker logo. Installation is quite simple. View detail
YOSHIMURA Fender Eliminator Kit
Item deliver in 4 days.great job webike.tip top packing.item is as advertised.solid built.my 4th order from webike.no 5th order is on its way.highly recommend.awesome team from webike.keep up the good work..more to come. View detail
Yoshimura fender eliminator kit
Item landed.packing was professionally done.item is as described correctly.yet to fix.my third order and 6 item overall from webike.highly recommend to shop here.thank you webike.very satisfied with the service.keep it up and more order to come. View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-S125
Parenthesis is good in its detailing.
The Yoshimura logo and the cutting out of the flesh in some places are cool.
I am glad I purchased this because extravagant OEMFender can be put together with Refreshing.
OEM Colgate Tube was used with a slight cut.
Wiring processing required.
View detail
Active and Competitive
The detail workmanship is superb.
Regrettably, the Harness on the License lamp is left uncut.
For this price, I wish they would at least put on a Coupler for each car model.
View detail
Parenthesis good ??
Parenthesis goodness is number one!
License Plate Light is not a complete-on system, so it requires a little knowledge of electricity, tools and Bullet Terminal etc. The Instruction Manual is not easy to understand, but if you have some maintenance skills, you should have no problem.
View detail
Rear Area Refreshing
The subtle YOSHIMURA inscription fills you with a sense of luxury and ownership.
The rear tire area has been refreshed, increasing the presence of the rear tire and giving it more power.
View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R1000
Not recommended!
As another person wrote, there is no terminal processing for LED Harness.
You must determine the polarity by yourself and connect at your own discretion.
*Manufacturer does not provide a warranty in case of polarity errors!
Of course, we're connecting them at the discretion of the operator.
Trouble due to Waterproof processing defects should also not be done by the Manufacturer!
The size of the LED-side Harness and Body-side Harness are different.
If the harness size of the terminal is the same on the LED side and the body side, I feel that there is no denying the possibility of crimp failure.
I have a 3M MINI ClampWireMountPlug 37103-3122-000 FL on the LED side.
MINI ClampWireMountSocket 7303-3163-000 FL is processed on the Body side.
Self Fuser Tape was wrapped around the surface to make it waterproof.
The MINI ClampWireMount can be installed with a pliers tool and is useful for changing the size of the harness between Male and Female.
I would like to request that if the product is sold as a kit, it should at least come with a terminal.
View detail
![Fender Eliminator Kit [Available around late July 2021].](https://img.webike-cdn.net/catalogue/images/89565/599-44C-0000_1_TS.jpg)
Fits: HONDA CBR250RR
YOSHIMURA alignment
The Fender is also changed to YOSHIMURA to match the Exhaust System, and the One point of Logo is also effective.
Nice work!
View detail
It's a good thing if the price allows.
[How is it used?
I finally put on the Fender Eliminator, which I always wanted to do.
Was the one you received as per Image?
Generally, as shown in the Image. However, the Fender Eliminator Kit as a whole is not so different from any other manufacturer's Large Eliminator Kit.
Was the installation difficult?
It's not that difficult if you look at the Instruction Manual, unless you are a complete beginner.
However, since the price is so high, it would have been nice if they had made the wiring part of the License Plate Light so that it could be pimped out.
How was your experience with it?
The precision of each mounting part is also good, as you would expect.
[Included Parts:were they on?
There were no missing Included Parts:.
[Was there anything that disappointed you?
As I mentioned above, I guess it is the Wiring part.
The processing is not difficult, but the price beats otherManufacturers, so I wanted it to be at least that much.
The product can be recommended, but the price is too high.
If that is not a concern.
View detail
Fender Eliminator Kit from Yoshimura
* About quality and texture, Durable stainless steel bracket that is finished off in black paint to blend in with the plastics on the underside of the rear chrome fender. * About the feeling of use, Cleans up the back of the Honda Monkey beautifully and the included LED lighting and reflector does a fantastic job keeping it all as legal as can be. * Products to buy together, Yoshimura make some outstanding looking parts for the Monkey 125 and you can not go past their frame caps for design, quality and pricing. * Difficulty of installation, The install requires removal of the plastics on the underside of the rear chrome fender to gain access to the electrical connector for the LED light and splicing into the OEM wiring to complete the install with what the kit contains. The process was completed in 45 minutes with little difficultly. * Cost performance and comparison with other products, The Yoshimura fender eliminator kit is above average in pricing when compared to what else is on offer and if you are not needing the Yoshimura branding on your Monkey then you can get the same quality for less money from a brand like Hurricane. * About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, One negitive with this kit is the LED light is not plug and play with the OEM wiring but you can buy the adaptor from Kitaco to solve this problem. Use the product reviews to assist in making a decision on your purchase. View detail
YOSHIMURA Fender Eliminator Kit
About quality and texture - Top quality. The stainless steel bracket mounts firmly to the chrome fender and the LED license plate light matches the rest of the LED light fitted to the Monkey. About the feeling of use - Removing as much of the OEM Honda black plastic as possible gives the Monkey more of the old school look which is great but having a shorter rear fender does also give you problems with water flicking up when you ride in the rain but lucky for me that doesn't happen very often. Products to buy together - Webike offer many Yoshimura parts for the Monkey here and I think adding their meter visor set would be cool. Difficulty of installation - The install of this fender eliminator is not as straight forward as others available on the market. The kit would have you cut the OEM Honda wiring to attach the new LED license plate light. Allow yourself atleast an hour to complete the job. Cost performance and comparison with other products - Not the cheapest available but would have to be one of the best quality kits available and would be the best if you didn't have to cut any wiring. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - If you are set on the Yoshimura fender eliminator kit, I would recomment also adding the Kitaco license plate lamp connection harness to your order to avoid cutting any wiring. View detail
quite tricky work for making holes
You have to consider that you need to make holes on your genuine part - cover. it was quite tricky and difficult to make holes for cables. View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Ninja250, KAWASAKI Ninja400
Wider than stock with the stock signal lights, but much higher.
You need to manually cut, strip, and connect the wiring yourself, but just for the plate light. The stock signal lights mount slightly wider than stock, but closer to the tail itself. View detail
For the price...
[How is it used?
I had ordered KIJIMA, but the delivery date was postponed to July, so I bought this one, but it was a mistake.
Was the one you received as per Image?
I have to put Yoshimura logo on Transfer Sticker by myself, but it is not sticky enough to transfer. I can remove it somehow with my fingernail, but the letters are torn off and it doesn't have adhesive power.
Was the installation difficult?
Since the electrical wiring is in the Cable only, it is necessary to modify the Bullet Terminal etc. I don't want to cut the Cable on the Motorcycle side, so I installed Kawasaki OEM CorrespondenceCoupler for Wiring.
How was your experience with it?
The rigidity is solid, but it's a little bit expensive, so if you can wait for the delivery, you should consider KIJIMA etc.
[Included Parts:were they on?
If you are using it for the ZX-25r, I think you should add the Coupler from the beginning.
[Was there anything that disappointed you?
Overall disappointing, defective and poorly made to begin with.
Other items that would be helpful
Opinions and requests to Manufacturer
The price is very reasonable.
View detail
Installation of z900RSFender Eliminator
The design is good, the look is neat, and the position of the Yoshimura logo is good.
I think you can install it if you're doing a little maintenance, etc. yourself.
The complaint may be the same with other Manufacturer's Fender Eliminators, but
The Fender Eliminator and Blinker mounting (Wiring) sections are now water proofed.
It's not perfect, so when you wash the car, you can hit the water from underneath with the hose and it will get into the car.
I made it Completely Waterproof with Sponge rubber in the mounting area and Coking in the Blinker mounting (Wiring) area.
View detail
Large strange to get the tools to install it yourself
The only new tool I bought was a 16mm hole saw
Electric Drills, Hexagonal Wrench and Electric Works Pliersetc. are required
We can drill 7 large holes in the parts, cut and process Wiring, and so on It will take some balls
In most cases, SEA BASS has a grounding wire for the Black wire I'm glad I didn't get lost in the License Plate Light's Wiring connection
The Installation Instruction Manual is very confusing, so it's better to leave it to the Shop It may be appropriate
Compare the cost of labor and the cost of the tools you need before you buy
View detail
DIY fun!
I'll review it in a certain Minskara style lol
Notes
Seat by widening the size of the three holes on the reverse side of the seat cowl Bolt stops directly to CROSS members of the rail
If you don't do this, you won't have enough length to hold the bolts in place
Even if you make the Bolt longer, I don't think you'll be able to torque-tighten it
Does it feel like you're sandwiching a thick Washer of Plastic?
It could come loose from vibrations during the ride and fall off!
Seat CowlReverse side trapezoidal cover has four Drilling is required
I think it's thin and soft and will puncture easily
Normal blinker's Harness is long as it is
It might be good to match the length of the license light of Kit
If you enjoy making various adjustments, I will recommend it to you
View detail
I wish they had made it out of aluminum alloy
For me, as I do customization almost in unison with YOSHIMURAParts The Fender Eliminator Kit was also an important point for me and I chose this product
Design is a preference, and if you look at it from the rear, it's under the tail lamp "SUZUKI" It's a good point to see the Emblem of
The License Plate Light is also a small, white LED Illuminate the Number
The drawback is that the weight is Steel Considering the price, I wanted to use Aluminum Alloy
The other thing is that the Instruction Manual is very difficult to understand when installing it
The work took about three hours
If you're not familiar with the work, it's better to have a motorcycle shop do the work for you
View detail