Reviews
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Cosmo
Note that the OEM LED Blinker has a Large Coupler and will not fit through the wiring hole.
Other than that point, I'm glad I bought it.
View detail
Started to hear strange noises from the Number.
It was easy to install, but because the Seat and the Seat are co-tightened together, the Seat almost falls off every time I remove it. Also, after installation, I started to hear a chattering sound from Number, so I put Epu and Sealer on Number to counteract the sound. View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Cost-consciousness
If you are thinking of cosmetics, this is a good product.
The coupler for the License Plate Light is included, and the holes are well-drilled, so installation took only 15~30 minutes.
Paint is easily peeled off, so be careful not to bump the work.
As mentioned in the product description, the License Plate Holder is not included, and must be purchased separately.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Simple and good
It appears to correspond to the Number angle of the new law.
Wiring for License Plate Light is also the same Coupler as the OEM and there is no problem with the connection.
The installation on the vehicle body took only a little time to pinch each of the four Spacer between the body side and the product from the underside of the vehicle body with four Bolts.
I wanted to wear Active's NumberSIDEBlinkerCompact, so the separate Bracket for STD Blinker was a key point of purchase.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Simple is good.
I wanted to make the silhouette as simple as possible.
I only deducted one star in the sense that it takes a bit of hang to put the collar between the base plate of the kit and the under cover of the car body. I only deducted one star for the hang between the base plate of the kit and the under cover of the car body.
I don't use Normal blinker so I don't use that Plate, I use Active's NumberSIDEBlinkerCompact.
A connector is also included, and the License Plate Light can be attached without any modification.
View detail
Fits: HONDA CB1300SB, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300ST
I installed it on a sc54 Black.
The installation work is Smooth after removing the Wheel, so I installed it when replacing the Tire. I heard that my acquaintance tried his best to install it as it was. The color of the mesh part is cheap, so I painted it. Also, I think the included parts alone may cause cracks due to vibration since they are made of carbon. View detail
It's very nice.
Installation can be done by removing the Tire. The texture and appearance are very good. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
A common phrase in Classic custom.
I recently bought it because I wanted to settle down and ride and wanted to make the exterior look Classic.
It is a good product that will betray your expectations in a good way.
Drilling is required.
good point
It is suitable for classic-looking motorcycles such as SR, ESTRELLA, and W.
The product is quite heavy and solidly built.
It also functions as a windbreak.
A bad point
There is a hole drilling work, so it is a little troublesome.
At first, I thought it was just an Attachment-like part, but I was surprised to find that it is also a practical part, such as a windshield. When I thought about it, I realized that this product has been around for a long time, which makes sense.
View detail
POSH carbon fiber rear soil removal
Material: Wet carbon fiber, average quality! Function: It is more beautiful and used than the original factory. Purchase installation experience: Prepare for the replacement of the swing arm, so please purchase replacement parts. The delivery time is very fast and the goods will arrive at around 7 o'clock soon. I am very satisfied! View detail
This is the first Mud Guard I put on.
I finally settled on HURRICANE's Mud Guard, but before that, I bought this one and put it on.
I thought it looked good, so I put it on …
good point
The thin aluminum board is stylish.
Easy to install with the Tie Wrap.
I can cover small stones to some extent.
A bad point
Stylish is fragile and contradictory.
The Tie Wrap broke easily and fell off the body.
The Mud Guard I bought was cheaper and stronger than the Mud Guard.
It may be wrong to ask for strength in the installation of Tie Wraps, but I think it is safer to use a manufacturer that specializes in Gold Parts, if it is a Gold Part.
To each his own, though.
View detail
It's pretty good.
I don't dislike the OEM tail of the z900rs, but I thought it was not enough around the rear, so I changed it to this product and the volume around the rear was increased considerably.
The LED's also illuminate quite brightly, so I'm happy with the Large variant!
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Orthodox Wind Cutting
CHIC DESIGN's Wind Cutting has been installed, and the new TX650's Since I bought a Front Fender, I bought it to install to it
CHIC DESIGN's Wind Cutting has a unique shape and a stylish look to it This Wind Cutting is the same type of cutters that can be found on BMW R12 and R75 etc The Orthodox look is also good Also, CHIC DESIGN's product does not have EdgeGuard, but this one does Material:It comes with Rubber's EdgeGuard so you don't have to paint the edges
I was worried about the warp of the TX650 and the SR400 with 19 and 18 inches respectively, but there was no problem Installed
The mounting widths of CHIC DESIGN and Wind Cutting here are different, so they are not interchangeable Therefore, it cannot be replaced by the mood
If you like originality Wind Cutting, you'll find it at CHIC DESIGN If you want to go for the right path or a classic, this is the one for you It's just a matter of installing both of them, so it's just like that Quite a recommendation for those who like Motorcycle
Installation is a Bottle, so be prepared to drill holes and do some work!
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R
You pretty much like it?
Since there is some play at the time of installation, I folded Dustcloth with the Tire on the Front side and pinched it and secured Clearance, it was able to be installed smoothly! View detail
The product fits perfectly for Yamaha TW 200. Fast shipping. Packaging is good. The price for the product is a bit too expensive though, especially adding the shipping fees.
The product fits perfectly for Yamaha TW 200. Fast shipping. Packaging is good. The price for the product is a bit too expensive though, especially adding the shipping fees. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
I am firm.
There is a heavy feeling than imagination, there is no worry of coming off because it is a hole drilling type. The atmosphere is completely different depending on whether there is this one. Since I attach a Rubber around Plate, I think it would be nice to have Bond for Rubber etc.. This Recommendation. View detail
It purchased, when FTR223 carried out a Ska tune. Appearance is different if there is nothing with there being this. Management also became very easy again. The Tail light is very much pleased with the Lucas. being related wit
It purchased, when FTR223 carried out a Ska tune.
Appearance is different if there is nothing with there being this.
Management also became very easy again.
The
Tail light is very much pleased with the Lucas.
being related with
attachment -- it is -- although -- it can attach with the very easy existing Bolt.
The
Blinker and the point which needs to be prepared separately require special attention.
View detail
The instructions although in Japanese installation is still very easy to fit. The fitment is also perfect and the offset pieces for the signal light is very useful. Price is very comparative as well. Good Product.
The instructions although in Japanese installation is still very easy to fit. The fitment is also perfect and the offset pieces for the signal light is very useful. Price is very comparative as well. Good Product. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
The hole was made and attached to the normal front fender of the kawasaki W400 with the electric drill. Appearance becomes a classical and is considerably pleasing! Although it worried about the fixing position considerably, I think that it was made t
The hole was made and attached to the normal front fender of the kawasaki W400 with the electric drill.
Appearance becomes a classical and is considerably pleasing! Although it worried about the fixing position considerably, I think that it was made to touch very much good.
* which is a recommend in the direction which likes a classic atmosphere -- cheap -- coming out -- sushi -- 笙ｪ
View detail
It purchases in order to fender-less-ize. I feel that this matches well most to TW which has carried out the ska tune. Since the tire is thick, the tail of smart Ho is good.
It purchases in order to fender-less-ize.
I feel that this matches well most to TW which has carried out the ska tune.
Since the tire is thick, the tail of smart Ho is good.
View detail
Not getting on on a rainy day is parts which will be the requisite -- Since the base stay of a tail lamp is put on the frame under a sheet, it is fixable firmly. Simultaneous wearing cannot be carried out with a rear fender. Although it is nat
Not getting on on a rainy day is parts which will be the requisite --
Since the base stay of a tail lamp is put on the frame under a sheet, it is fixable firmly.
Simultaneous wearing cannot be carried out with a rear fender.
Although it is natural --
Moreover, keep in mind that there are strange conditions called the ability not to use the blinker stay base of the company where the tandem grip of the company is attached.
The product and the style from width become the wind made into the refreshing, and are smart.
View detail