Reviews
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Make a Chain.
Simply remove the previously installed item and install it in the same manner.
The product was just the right Size for MONKEY.
View detail
Mud Splash Countermeasure
(Photo 1) The front fender is fixed to the black parts under the under bracket of the front fork with three bolts, which can be easily removed from the back of the fender with a ratchet wrench.
(Photo 2) Brackets attached to Fender 。 I also stuck a Fender extension on it to prevent mud splatter. 。 (2) Bracket might be better to put on later.
(Photo 3) BracketQuantity in (1):2pc is Quantity:Pair (for Left and Right) Note that the shape is slightly different in
(Photo 4) When a long Bracket was temporarily fixed with Bolt, the Fender was turned at an angle. 。 I thought maybe the parts were not very precise, but in fact it was because the bracket (2) hit the front side of the arrow part (the part where the brake hose guide was fixed) and was not in the correct position. (In fact, the bracket (2) was not in the correct position because it hit the front of the arrow part (the part where the brake hose guide was fixed).
(Photo 5) Finally, insert the Spanner into the gap between the Tire and Fender, tighten the Bolt from the top and bottom, and you are done.
Back paint was solid and did not peel off during the work. 。 Parts are very accurate, and no heavy lifting was required, nor did the Fender ever turn at an angle. 。 It would be nice if it were a little cheaper, but considering that Bracket has a solid thickness, it is not cosmetic.
As a complaint or rather a request, the Quantity of a long Bracket:Pair (for Left and Right) It would be nice if it says R or L so that it is easy to understand the 。 I thought it would be easier if the long bracket and spacer were welded together, since it took a lot of time to get the bolt through the triangular bracket, long bracket, spacer, and fender during the first temporary assembly.
I have converted to a down fender and attached a fender extension to prevent mud splattering, but I guess it depends on personal preference whether you prefer an up fender or a down fender. 。 By the way, I prefer Up Fender for MONKEY125.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY
Lowers your front fender
Very high quality machined piece to lower your front fender down. Greatly improves the visual look your Z50. I purchased it at the same time with new fender rubber grommets to complete it. Installation is easy and simple, just 10mm spanner required. Shipping was fast and the product was packaged well A+ View detail
Fits: HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA NSR mini
For those who want to customize with a low level of flamboyance and casualness.
[How is it used?
I decided to refresh my long-owned car while restoring it, and while examining various parts, I found and purchased this product from Webike.
Was the one you received as per Image?
The design is similar to the front fenders installed on cars with inverted front forks in the 1990s, and it makes middle-aged men nostalgic.
I am getting to the age where I feel shy with too flashy a design, so this was just right for me and just as I imagined.
Was the installation difficult?
The fixing place is the same as the normal fender, but it is designed to cover the outer tube on the front side of the front fork, so it is only a little bit troublesome.
How was your experience with it?
The Front Fender itself fulfills its function (preventing water, etc. from bouncing up when it rains).
There was some distortion when I purchased it, but after installing it on MotorcycleBody for a while before painting, the distortion was gone.
After that, it is firmly painted and attached to the car body.
[Included Parts:were they on?
I think it had a Body and Installation Instruction Manual in it....
[Was there anything that disappointed you?
No, there was a slight distortion, perhaps due to individual differences, but as I mentioned above, it improved after leaving it unassembled for a while, and I have no problems with it.
0Other items that may be useful include
Point and hang of installation
Material:Since some individual differences and distortions are inevitable in FRP products, it is advisable to perform temporary assembly to check and correct distortions and defects before painting.
If the paint comes off in a distorted state after painting, forcibly assembled, it will make you cry.
[Availability and clarity of the Instruction Manual
A very simple installation Instruction Manual is included.
The installation itself is very easy, so check it once with a temporary assembly as shown above.
[Notes]
As I have written extensively, there are inevitably individual differences due to the nature of the material.
In some cases, bubble marks can be corrected by thinning Pate, etc. Base this item. The following is a brief overview of the process.
[ITEMS TO BUY TOGETHER
Thinned Pate/Water-resistance Paper in some cases as mentioned above.
Traces should be purchased with a primer, paint in the color you want to paint and Clear paint.
[Opinions and requests to Manufacturer
The product has been on the market for quite some time now, and it was a great help this time as well.
Please continue to sell as much as possible in the future.
View detail
Standard Fender Eliminator
I didn't like the Fender too long on the groms, so I went with the Fender Eliminator.
The angle is Large human, but I'm satisfied with the Refreshing!
The 1 pcScrew did not tighten properly during installation… I wonder if I missed something….
View detail
Active License Plate Holder attached.
[How is it used?
I replaced the OEM Fender with this Fender Eliminator Kit from KITACO. I wanted to use Active's License Plate Holder with Blinker, so I installed it in the place where only License Plate was originally installed.
Was the one you received as per Image?
It was Black as shown in the Image.
Was the installation difficult?
I could not install one because the part that attaches directly to the vehicle body requires four Bolts to be passed through the hole while holding it from the back, and a collar must be inserted between them.
How was your experience with it?
Even with three pieces, if properly tightened, it did not wobble. I took a long trip after installation and it was Large sturdy.
[Included Parts:were they on?
It was attached properly. I think that is the way it is with all products, but I had a problem when I lost it because there is no spare number of Screws and so on.
[Was there anything that disappointed you?
This is because I added Active's License Plate Holder, but when viewed from the side, it stands out because of the hole for the OEM Blinker.
Other items that would be helpful
Installation Point or hang
I think it is possible to do it with two people while holding down all four Bolts./Availability and comprehensibility of Instruction Manual/Points to note/Items to be purchased together/Opinions and requests to the Manufacturer
View detail
Other License Plate Holders can also be used.
[How is it used?
I purchased this product because I wanted to add Active's License Plate Holder with Blinker.
→License Plate Holder with ActiveBlinkerhttps://www.webike.net/sd/9391707/
Active's required more Wiring processing, so now we are diverting the OEM Blinker.
There are Fender Eliminator Kits that have all the parts in one package, but this product is divided by parts, so the angle of the number can be adjusted by adding movable parts at the base where it is attached.
Was the one you received as per Image?
The black color matched the Graphite black of the car body and was just as in the image.
Was the installation difficult?
The CBR250RR Fender replacement itself is quite a hassle, so it was a struggle, but we were able to install it without incident.
How was your experience with it?
I was very happy with the clean look.
[Included Parts:were they on?
All the Included Parts:were attached.
[Was there anything that disappointed you?
I thought it would be a little lighter, but it feels rather heavy when I hold it.
But I think it will be much lighter since the OEM Fender weighs about 1 kg.
[Availability and clarity of the Instruction Manual
Instruction Manual was included. I think there was nothing in particular that I didn't understand as I was going through the blog and other information.
Other items that would be helpful
Points and hang of installation/Points to note/Items to be purchased together/Opinions and requests to the Manufacturer
View detail
Gives an overall better look for an all road orientated Monkey
About quality and texture, I can confirm the quality great and the material used is steel plate with a satin black painted finish.About the feeling of use, This down fender bracket set gives an overall better look for an all road orientated Monkey but it would be nice if the bracket had some adjustment to fine tune the height and angle of the fender.Products to buy together, By relocating the front fender from it's original position you have exposed the horn which looks cheap, the addition of a horn cover or horn relocation kit to your cart would be recommended.Difficulty of installation, I can say the fitment of the down fender bracket set for my installation was easy due to the ease of access to all the mounting bolts and included instuctions on how to assemble the set.Cost performance and comparison with other products, The pricing of this product is great You receive parts made from good quality material and the design of the set is solid. There are a few higher priced options similar to this product but with more attractive parts in their set, in the end they achieve the same outcome.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Somewhat difficult to durability
[How is it used?
It has traveled about 1000 km after installation.
Was the one you received as per Image?
The Frame was good and rigid, except that the Reflector and License Plate Light were double-sided tape mounted.
Was the installation difficult?
Only the License Plate Light requires wiring processing, but the body installation itself was easy.
How was your experience with it?
The rigidity of the body itself was strong against vibration and the design was good, but I was still concerned about the durability of the double-sided tape attachment of the Reflector and License Plate Light.
[Included Parts:were they on?
Basically, nothing was needed separately for Bolt On, but it would be more efficient to replace the Blinker together.
[Was there anything that disappointed you?
The Reflector and License Plate Light, which we were concerned about the durability, came off the Body without lasting 1,000 km, as expected.
The License Plate Light could not be repaired because the wiring was broken from the root.
I thought it would be better not to install double-sided tape on a motorcycle, which is subject to strong vibrations.
The reflector mounting part has holes drilled for bolt fastening, so bolt fastening is possible, but the License Plate Light mounting part has no holes drilled, so only double-sided tape can be mounted without any modification.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Cool rear
A license plate is mounted above a regular fenderless kit, creating wheelhouse space. It is recommended if the swing arm length is longer than the genuine part. View detail
Does the job, could be a little lighter.
Got this to lower my front fender closer to the wheel, it does the job. I wished it was lighter, seems a bit much just to lower the fender. View detail
Compliant and modern styled rear fender
About quality and texture, I can confirm that the quality is great and that the material used is aluminum with a black anodised finish. Includes it's own LED licence plate light. About the feeling of use, Some people may not like the modern style of this rear fender but I was happy to take some of the original looks away from this bike with the key changes like the exhaust system and air intake, so this styled rear fender compliments those modern additions. Products to buy together, I am not a fan of the look of the original airbox so an open air intake would be ideal to add to the cart to help clean up the look at the front end. Difficulty of installation, I can say the fitment of the fender eliminator was very easy due to the simple nature for the installation of the bracket and the fact that all the items needed are included, even the reflector. Cost performance and comparison with other products, The pricing of the product is great. You receive a modern designed bracket that uses quality materials and a bright LED licence plate light. A few other options around the same price but with less appealing designs. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Great for lowerd bikes
I purchased this fender because my monkey is lowered and stretched and my stock fender was rubbing the tyre.overall I think it looks better also. Nice quality too View detail
Standard Custom
Installed on a 14 Grom, the Rear area has been refreshed and parenthesis has improved. But you have to be prepared for mud splash. It would be great if the angle of the number was a little more flat, but it seems that it is not necessary due to regulations. View detail
Carbon fender
Rear Carbon Fender for Grom is not so easy.
We don't have any in stock, so it's a good idea to buy it while we have it!
For JC61, but can be installed on JC75.
View detail
Helmet lock for GROM...
What made you decide to buy?
My GROM does not have a helmet lock. Recently, my eldest son rides the GROM and we go riding together. Recently, my oldest son rides a GROM and we go riding together. I updated the Fender Eliminator from another company so that I can easily lock it to the GROM from now on.
How was your experience with it?
My other bike, the ZX-6R, has the OEM Helmet lock on the LeftTandem FootpegBracket. The helmet lock is also installed on the Left Side of the GROM. Well, both of them have exhaust systems on the Right Side, so it's inevitable to use the Left Side.
The material is steel, which makes it a little heavy, but the body is solid. The color is black, which matches the inner surface without any discomfort. The license plate light is an LED, which consumes less power than the OEM bulb and is bright enough to illuminate the number both during the day and at night. -6R is an OEM product, so the helmet lock and main key are one-key. There is a separate key for the helmet lock. If you are not satisfied with this, please contact us. If you are dissatisfied with this, you can change the key to one key.
[Others]
Applicable models are Grom JC61-1300 001~ Grom JC75. The lockType2 (Black) is included, and the STD Blinker and FenderMounting Bolt are reused OEM products. My GROM has been replaced with an external blinker (made by DAYTONA). My GROM is replacing the blinker with an external blinker (made by DAYTONA). I was able to install the blinker on the Fender Eliminator I purchased without modification, but I am not sure if other external blinkers can be installed without modification. Also, it does not comply with the new license plate standard that will be enforced on October 1, 2021. The angle is good for parenthesis.
When installing the product on a car model that meets the new License Plate standards effective October 1, 2021 It is necessary to confirm.
View detail
Stylish and functional
I was arriving at my dream Grom, which was given to me cheaply by a junior colleague.
This one has Reflector on it and is very cool, even though it's legal and okay.
This item is a good looking and functional Fender Eliminator which is very nice for us who think that Fender Eliminator is the basic motorcycle.
View detail
Fits: YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X
Used for SE462 Taiwan 5 phase
SE462 Taiwan 5th term (Type 2 CYGNUS) in use
I was not sure if the Carbon color would match the White color of the car body until I installed it, but the OEM Fender of Type 2 is a very large design, and by installing this product, the impression became Race ish.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
I put it on my Ronsui MONKEY.
I installed it on my Ronsui MONKEY.
It's a combination with Minimoto Exhaust System Up Type, but it's a perfect combination.
It looks like an Exclusive Design.
However, if it is a combination with 20?Long Swing Arm, the length of the mudguard is not enough even if License Plate is added.
View detail
Stylish。
I bought this product at another shop, but it is a KITACO product and I like its quality and shape. It has more parts than other company's products, so please take your time to read the instruction manual and enjoy the installation. View detail