Reviews
Easy dress-up
[How is it used?
I wanted to change the look of the SUPER CUB110 (JA59) a bit, and also to have an anti-agitation effect.
Was the one you received as per Image?
Nothing of particular concern.
Was the installation difficult?
You will need a #3 Driver and a 10mm Wrench, nothing too difficult as you just need to remove the License Plate and install them together.
How was your experience with it?
It looks a bit Wilde. I'm not sure how effective it is in preventing agitation (partly because I didn't get something so blatant to begin with). Well, it makes it look more like an Off-road Motorcycle, which is better than nothing.
[Included Parts:were they on?
Nothing in particular, just Body.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Since the material is Rubber, I don't think I need to worry about it, but I thought it might hit the Fender that comes with the Motorcycle from the beginning, so I put Urethane Seat on it (2nd photo).
View detail
I think it's good that it's cosmetic.
The installation can be done by looking at the Instruction Manual, but the Blinker connection seems to be the other way around. I am glad I read your impressions. I bought some rubber string and waterproof tape at Home center to fill in the gaps. I wish I had done a little more research to see what other manufacturers were doing, but considering the cost, it was a no-brainer. I still get muddy on wet surfaces and in the rain. View detail
it's recommended
I think the price is right for everything.
Plus it looks a lot better.
View detail
Inexpensive but well-made product.
Purchased to make the OEM's wild Fender SMART.
I'd say it's one of the less expensive Fender Eliminator Kits.
I think the product itself is well made and looks good.
I wondered about License lamp Wiring.
Both have two wires, one red and one black, but the instruction manual for KIJIMA's wire is written to connect them in the opposite direction.
Is it some kind of diversion? If you know, I'm pretty sure they should be the same color as the OEM….
Also, the bolt used to attach the Kit to the car body is a hexagonal button bolt with a round head,
It is easy to lick, so regular Bolt is considered better.
Other than Wiring and Bolt, I think this is a great product.
View detail
For FROM 200!
I installed this on a Van Van 200, and it looks like I added it to the OEM mudguards, I was going to install it where the holes are on the License Plate, but it was too short and ugly, so I drilled out the mudguard holes and installed it much lower. I was told by others that it looks tacky, but please don't laugh at me, as it is my own personal world.
I also chose the mudguards for the front side. vanvan200Front Fender is too wide, so it was just right for the rear side. I changed the shape of the front and rear mudguards. It is full of nostalgic feeling.
View detail
I bought it to install it, but I couldn't.
[How is it used?
I bought it for the Rear Mud Splash, but unfortunately it didn't work.
Was the one you received as per Image?
Image was great, but I made a mistake and I just couldn't get it installed.
How was your experience with it?
Installation could not be done
I made the mistake of buying it.
[Points to note]
It is a good product, but could not be installed on the HUNTER due to the shape of the Rear Fender.
Of course, I tried to see if I could install it on the Front, but it was still impossible.
How did it compare to other products?
No comparison.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I think the person who purchases it can install it on other models.
(As a precaution.)
I was wondering if the CT110 HUNTER CUB needs to be Rear Fender processed on the day of the product itself.
View detail
Now you have the ideal Style!
I have been an Up Fender guy since my old ST50, so when I found out about this product, I pre-ordered it even before it was released and bought it.
The instruction manual says to prepare OEM parts for the bolt that holds the Fork Guard separately, but I had no problem with the DAX Fender bolt. However, I had no problem using the same bolt that holds the DAX Fender. I was able to install it even as an amateur, but the instruction manual is written on two A4 sheets of WhiteBlack paper and contains only one quantity of parts.:It is a little bit difficult to understand because it is explained with more than 5pcs. pictures. when I use KIJIMA's ForkEmblem together, there is a space to move Horn to the rear, but the length of Wiring of Horn is not enough. The female terminal is not L-Type, so it is not good. I will think about it a little because the Horn Relocation Kit for MONKEY125 from Emon seems to be available.
The Styling is Large compared to the OEM's wild Plastic, and the increased Clearance of the Fender and Tire makes me fantasize about the next Custom if I can make it a block tie ya ….
View detail
water protecter~!!
Kizima products don't disappoint. I bought it to fit on Monkey 125. Fenderless kits were fitted, so they needed protection from soil/water splashes. It's a rubber with a large size and strong material. I think it's durable, too. It's still before fitting, but I think it'll look good on you after matching it. The checkered design also looks very sophisticated. I'll use it well. Thank you. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Simple construction and easy installation.
Since it was coated with black gel coat, it was prepped and painted with urethane black. If I may say so, the angle of installation should be a little more upright, so it will be safer during the vehicle inspection. View detail
nice product for zoomer
It's easy to install The rear fender was removed, so there was a lot of rain, so I think I can act as a rear fender. And most importantly, the checkerboard pattern is cute. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Installation is easy
The price is overwhelmingly low, and since it is Black Gel Coating, I think it is supposed to be painted, but I am not particularly dissatisfied even if it is installed as is. The instruction manual is very detailed and the wiring installation is easy. View detail
Kijima rear fender eliminator
Well made but not perfectly aligned. Overall good build and quality. Love the look of the tail light. Comes with rubber grommets and bolts View detail
KIJIMA Fender Eliminator Kit
It took more than two months for delivery, probably due to Corona, but it was worth the wait.
The instruction manual was easy to understand, so even an amateur could install it rather smoothly.
View detail
He's so cute.
Used for square-grained CUB No. 90Custom.
The poor CUB bloodlines are now plump and a little prettier.
Installation is super easy:just tighten the screws together with the number.
By the way, KIJIMALogo is hidden when Number is attached.
The thickness is about 2mm, so it may be necessary to select the NumberMounting Bolt length.
Used 20mm under the neck that was left over.
I guess the only demerit is increased aerodynamic drag.
View detail
Fender Eliminator installation
Installation took a bit of time, but we managed to get it installed.
The cowl on the SIDE under the Seat was difficult to remove, and that was the most difficult part.
Once installed, the Fender Eliminator is still a good parenthesis.
View detail
It eliminates mud splatter and hides the poor backside.
I recently purchased a motorcycle called the Heritage 125 by Bullet, which is a rip-off of the old DAX. I know it because I rode a DAX70 in the past, but the tires are too thin and the rear view is too poor, and if I ride it after it rains, the splashes will fly away. I had a hard time deciding whether to go for the Round Type or the GizaGiza Type, but I decided to go for this one because it looks more elegant and is a little smaller.
However, although I like this Checker flag pattern, I think it is too safe. So I made my own BULLET logo with Cutter1 pc and put it on it (I should have put it a little lower). (I should have put it a little lower.) But I think it looks good.
View detail
Somewhat so
The bracket needs to be bent when installed, and the hole for wiring under the Seat needs to be plugged, but at this price, I think it can't be helped.
The bending was done by Spanner and the wiring holes were plugged with Gum Tape.
View detail
Used for CUB110 JA07
I think it could be a little longer. I would like to see Variation in length. View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR
Kit is heavy.
Material is heavy because it is iron, I would like it to be lightweight with AluminumMaterial. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R3
Refreshing
If you buy a CowlMotorcycle, I still prefer the Fender Eliminator. It looks cool and I am very happy with it. It was easy to install. View detail