Reviews
The quality is as expected.
I was a little worried because it was made to order, but the hole position was Exactly and I was able to replace it easily with Hexagonal Wrench1 pc. If you are interested in it, you can buy a Sticker. View detail
Design-wise good
I checked the video on the web before starting the work. The coupler for the number-plate lighting line cannot be removed unless the cowl behind the seat is removed. It took a little bit of time to remove and install the Carrier Plus, but the installation was completed without any problems. After installation, I found that there is a protective tube on the exposed line from the Number Plate lighting and that there is a gap where it enters the body of the car. It looks more expensive than other products (plate type products). View detail
I'm being dry, but ...
First of all, installation is quite troublesome, especially if the Rear Carrier and Box are installed.... WiringCover- and Boots are not included for the high price. Although the wiring retractable part is designed to minimize water intrusion during mud splashing, there is a slight gap, so the part was treated with coking. After installation, it looks more expensive than other products (in fact, it is expensive...) and Parenthesis is good. View detail
If you want to buy another company's product and cry about it later, this is the one you should start with.
Although the price is a bit expensive, it is a well-designed product considering Gold fatigue, etc.
Most of the Fender Eliminator Kits from other manufacturers are simply cut and folded aluminum plates, which are in essence an extension of the License Plate Support Plate. Therefore, if you drive off-road seriously, it will be broken in no time due to the fatigue of gold.
This MORIWAKI product is a product that uses screws to assemble small parts in 3D to prevent gold fatigue. Although the assembly work is time-consuming, it is unlikely that the license plate will break due to gold fatigue and fly off during driving. When assembling, you need to be careful to lock the screws with a product such as Locktite and to protect the thin wire from the License Plate LightLED to the socket. Anyone who can do a little maintenance can do the work.
If you are going to buy a Fender Eliminator Kit from another company, it is safer to buy this one.
View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CB125R, HONDA CB125R
The product is as expected.
I was right in choosing MORIWAKI. I would like to continue to use MORIWAKI products in the future if I like them. View detail
Rubber stay and Spacer are ……
The installation itself does not require that much skill, but the process of putting in Blinker's Rubber stay and Spacer is rather tough.
It is definitely not for amateurs, so ask someone in the know before you do it.
View detail
It's hard to take.
Looks Material:Carbon Style is also clear and good.
Just install the Quantity:Pair (for Left and Right) The Bolt holes in the "B" were narrowed back and forth, which I take the liberty of assuming is a vibration countermeasure.
View detail
The best short tailstock for 21 years
"About quality and texture
The quality and texture of the matte black metal is very good. The only thing to note is that it is easy to fade
About the feeling of use
This is super nice to install. Compared with most other brands of license plate holders, you can see more exhaust pipes. If you change the appearance of the pipe, you can buy this one.
About Design
The hollow design looks good. The position of the direction light is higher than the original one, which is more integrated --------------------------------- ------------------------- About Quality and Texture The quality and texture of dumb metals are very good The only thing to note is that it is easier to fade About the featuring of use This is super beautiful For the license frame of most other brands You can see the appearance of more exhaust pipes Just buy this one to buy this About Design The hollow design is very beautiful The position of the direction light is more integrated than the original Powered by Google Translator"
View detail
I know it's a little expensive.
We chose this one among other products around 10,000 yen because it is lightweight, made of aluminum material, and has a good design, as well as because it matches the MORIWAKI Slip-on Silencer and front pipe.
I think it is well thought out and designed to fit snugly as if it were an OEM product.
The downside is the high price, which may not be helped by the fact that it is aluminum and includes a license lamp and reflector.
Assembly was not difficult, but it was tedious because of the many Parts. It was easy to install the assembled parts.
For this price, I would like to see the Smallest Hexagonal Wrench included. Well, people who customize motorcycles usually have one.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS
Cool。
I bought this because it was a good price, although it doesn't have an Inner TubeCover, and I think FFork is fine if you take care of it often. View detail
It's cute, but it's a pain to install.
[How is it used?
I finally finished installing it and now I'm going to use it.
Was the one you received as per Image?
I thought some assembly would be required, but I didn't imagine it would be all assembled with boards and screws.
Was the installation difficult?
The Instruction Manual is quite simplified, and I managed to assemble it by relying on the floor plan.
The installation was changed from the one that the OEM fixed with Bolt to the Post of the female screw to the form that it fixed with Nut through the collar to Bolt, and this was troublesome.
How was your experience with it?
I'm happy with it because it looks Parenthesis good from the side while the overall length is shortened as expected.
[Included Parts:were they on?
Basically, it contains only what you need.
[Was there anything that disappointed you?
The fact that some parts required a 7mm wrench.
The Cable of the License Plate Light looks quite unreliable.
Rank.
Other items that would be helpful
Opinions and requests to Manufacturer
All of the bolts are Silver, but I thought it would be nice to have them all in Black.
View detail
I can't install...
I bought it because it fits CBR900RR (00) and VTR1000SP, but I couldn't install it on CBR900RR (00 929) because the back side hole position didn't fit at all. It is a pity. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS
Highly recommended for cost effectiveness and satisfaction.
The price is Reasonable but the accuracy and Fitting is perfect.
That's what I call MORIWAKI.
(Caution) When removing the normal fender, you need to remove the bracket that holds the brake hoses (destroy the Rivet by rubbing it with a drill) or remove the front tire.
There is no inner tube guard, but if you take good care of the fork, you will not have to worry about it.
View detail
Blinker's position
The Blinker is too close to the car body for me to use it..
There may be times when you might wear a seat bag or side bag
View detail
There is only things that are high
The texture of Carbon is also good and Clear can not be faded quite easily.
If you set Fender to Carbon, you want to unify other Parts to Carbon, so it is likely to add extra expense, but it is scary
View detail