Reviews
is it worth it...
well,after fitting it which is really easy i noted there is no easy way to fit the rear lamp,it would be easier and cheaper(especially here in the uk,as we pay a lot of import tax)is to modify the original rear fender which is easy.. View detail
Slim
It is a change from other ManufacturerFender Eliminator It becomes very Slim and I am satisfied with Large
It would have been even better if the RANs light was included
A little bit cheaper would have been better
View detail
If you buy it in Set, the capacity under Seat will increase to Large width
Refreshing appearance, but the storage capacity has increased significantly. Because the vehicle is old, it is the best because you can stack more tools and rain gear. I think that purchase with Set is definitely better View detail
For ETC installation
Until now Cut and use OEM's Fender
However, in order to secure Space of ETC installation,
Because the price is cheap for this hand Fender Eliminator
I bought it. Thanks ETC can also be installed
Besides Rain jacket and plastic bottle (500cc) There are several
I got a space to enter.
View detail
There are gaps, too
I'm almost satisfied.. I will enter quite a bit.. If you do your best, you can also install Rain jacket. Reserver tank protrusions are in the way. If it is not there will be more. 18 in on the back side. Regrettably, it is getting shallower so as not to rub. 17in. If it is premised, the back side should also be deep.
I should not let any strange partitions be lost. I am considerably remodeling myself and increasing the capacity, but I think that it is good to be able to make Large capacity inexpensively.
View detail
Secure a truckload for the time being
It is an incomprehensible picture, but it is from the bottom.
The rear half of the Rear Fender, which is usually Arch shaped, becomes flat, and its space becomes the cargo room.
However, I found that it is an almost useless Level if you put Wiring such as Tail lamp alone with this alone.
First half expansion kit (17 "assumption) I think that I will buy it as soon as possible.
For those who only want to be Fender Eliminator, it is also recommended for cospar.. Activeetc. Since few thousands of yen cheaply fits.
View detail
Is it reasonable for the price?
It is the lowest price among GPZ 900 R's Fender Eliminator.
I think that there is no problem if there is technology that OEM's Fender can be removed smoothly.
Space to put Small objects (Increase further with Inch down & Expansion Kit) So, if you are looking for appearance and practicality. It seemed like there was no instruction manual.
View detail
There is a gap
It was better than what I thought.
I made it to Black
The feeling of tightening increased to the highest.
But, as there is a little gap with Frame, the more nervous one.............
View detail
Since it was the Fender less which processed an authentic positive one, it changed. Since the Touring etc. were seldom carried out, not a large capacity type but the cheap thing was chosen. It was not conspicuous with a Black and was finished in good touc
Since it was the Fender less which processed an authentic positive one, it changed. Since the Touring etc. were seldom carried out, not a large capacity type but the cheap thing was chosen. It was not conspicuous with a Black and was finished in good touch. The degree of setting angle of a Number is also an angle which is not disagreeable. Although attachment was easy, removal of the Cowl, etc. took time. View detail
Although Fender less KIT of the other company was used, a specification change was made to compensate for inch[ 17 ]-izing. Since it was a Fender less only by the side of a Tail lamp until now, when the automobile inspection certificate was put in, there
Although Fender less KIT of the other company was used, a specification change was made to compensate for inch[ 17 ]-izing.
Since it was a Fender less only by the side of a Tail lamp until now, when the automobile inspection certificate was put in, there were only few Spaces.
It equipped also with the escape KIT collectively and has secured the big Space also beside the Battery this time [
].
Even if it puts in a Rain jacket etc., it is still generous, and if it is a day's trip Touring, it is empty-handed and can go.
The crevice between the Seat frame after
attachment and a Fender less has been made.
Moreover, between an extended Kit and back Fender lesses is the same.
although I think that there are some errors by individual specificity, since the same contents also as in play [ of other persons ] are indicated, some crevices are unavoidable -- it is the touch called !?.
By the mud etc. which had splashed entering, since the crevice between the Fender lesses of the
escape KIT and back is so, it puts a Sponge and is fixing it with double-stick tape.
A Sponge portion (it is visible on a Tire) is intelligibly taken out with a picture, and the photograph is taken.
Since the crevice between it and a Seat frame is not likely to have a big problem for the moment, it is not coping with it.
Although it may be an impression which is not recommended as writing in this way, even if UP of a useful load is based on this, it is attractive enough, and since it is some crevices, I think whether it can respond enough with the device carried out just for a moment.
In the direction formed into
17 inch, or the direction examined from now on, I think that it is an Items which we can recommend to you.
View detail
It seems that it will take time if it is a direction which is not improved by it although time and effort was taken when predicting that it will be easy. [ who was able to do it by himself ] [ ]
It seems that it will take time if it is a direction which is not improved by it although time and effort was taken when predicting that it will be easy. [ who was able to do it by himself ] [ ] View detail
Storage space becomes large greatly, even if it puts in an in-vehicle tool, ETC, etc., it is generous, and even if a vicinity Touring etc. do not have a Bag, even the wallet entered and it is very satisfied. However, since the crevice was made, he bought
Storage space becomes large greatly, even if it puts in an in-vehicle tool, ETC, etc., it is generous, and even if a vicinity Touring etc. do not have a Bag, even the wallet entered and it is very satisfied. However, since the crevice was made, he bought there the sheet for sheet repair of the Seal type, and it stuck on it at the whole. Since it excels also in cushioning properties, it is a Recommendation. View detail
It was disagreeable to have put a rain jacket and lunch into a bag and to have walked around with them by day's trip touring or commuting, and it purchased the mass fender less. Attachment was able to be attached easily in a short time. a rain jac
It was disagreeable to have put a rain jacket and lunch into a bag and to have walked around with them by day's trip touring or commuting, and it purchased the mass fender less.
Attachment was able to be attached easily in a short time.
a rain jacket and a lunch box -- entering SUPPORI -- it can be empty-handed and he can go out now.
It is large satisfaction.
View detail
The car body custom carried out with A8 domestic specification is got in medieval times, and they are four years and a half. It had given up that there is no space under a sheet in the least, when unavoidable. HID and this mass fender less kit wer
The car body custom carried out with A8 domestic specification is got in medieval times, and they are four years and a half.
It had given up that there is no space under a sheet in the least, when unavoidable.
HID and this mass fender less kit were purchased here as since this product was got to know with the report of the magazine, attachment of ETC and HID was exactly considered given the opportunity of the automobile inspection and those installing spaces are also securable.
Since attachment was requested from Schopp at the occasion of maintenance for vehicle test, did not see the process, but only saw the state after completion, but.
Since it read in play here, saying Splashes of mud enter from a crevice, at the time of taking over, the aluminum tape was brought and the crevice was taken up, but it was crumpled and became awkward.
View detail
Since the 17 inch & KETSU raising had a thought of the point for the time being, it chose this product without an extended kit this time. In carrying out fender less-ization, it is charm that they are budget prices because of the minimum composition.
Since the 17 inch & KETSU raising had a thought of the point for the time being, it chose this product without an extended kit this time.
In carrying out fender less-ization, it is charm that they are budget prices because of the minimum composition.
There is no dissatisfaction in particular also about attachment by the product made from aluminum which is thick as it is also about construction material and accuracy.
Since it seems that it can respond by addition of an extended kit also when 17-inch-ization of a ninja time-tested product is carried out, it is felt as economical kana.
View detail