Reviews
TOP !
Très beau rendu une fois monté, montage très facile et bien ajusté il suffit de reprendre les attaches sur le garde boue d'origine et de remettre 2 rivets.
Very nice rendering once mounted, very easy assembly and well adjusted, just take the clips on the original mudguard and put back 2 rivets.
Attention pour la France j'ai du payer 48 € de taxes douanière a la reception.
----------------------------------------------------------
Very beautiful rendered once mounted, very easy and well -adjusted assembly, just take the ties on the original mudguard and put 2 rivets.
Very nice rendering once mounted, very easy assembly and well adjusted, just take the clips on the original mudguard and put back 2 rivets.
Be careful for France I had to pay € 48 of customs taxes at the reception.
Powered by Google Translator
View detail
DOREMISteelPlating fender
I changed from plastic fender to plated steel. I'm very happy with the weight and shine, but I'm very disappointed with the dimples between the point welds.
The finish was surprisingly rough for the price, and like the paint job on the exterior of the tank, it was so rough that I decided not to buy DOREMI products in the future. Also, the front fork and fender fixation requires a bit of modification as the fender itself may be deformed if four collars are not installed.
View detail
The front area is tightened up!
I installed a DOREMI Plating Front Fender on my ZEPHYR750.
The OEM Front Fender wasn't very good at parenthesis.
Also, the paint surface had deteriorated over time and was no longer tight, so we had to replace it.
Just change it to a Plating Front Fender for a more old car feel.
Installation is very easy.
The Speedometer Cable's Clamp is not needed.
Anti-rust oil is applied to the entire fender, so please be careful not to slip off when replacing it.
You'll want to replace the Rear Fender with Plating as well.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RSCafe, KAWASAKI Z900RS, KAWASAKI Z900RSCafe
ORDER NUMBER ERROR
HELLO FOR THIS ORDER I AM FUCKED REF ORDER I ORDERED REF 35113 WHILE I WANTED REF 35130 IS THIS POSSIBLE TO MODIFY THE ORDER THANKS B CAP HELLO FOR THIS ORDER I AM FUCKED REF ORDER REF 35113 WHILE I WANTED REF 35130 IS THIS POSSIBLE TO MODIFY THE ORDER THANK B CAP translated by Google Translator View detail
Perfect except for Fitting!
It installed in ZEPHYR 1100.
We do not know 400 or 750, but a considerable gap opens to attach to 1100.
I am on One Side 1. I'm installing two 5 mm Washers in layers.. Nevertheless the gap is open so I think that we will open a gap of about 1 cm if you bring it to either.
If it is at least 5 mm, it will be individual difference...
Even so, there is nothing I can not turn on Parenthesis It gets better, so this evaluation.
1100 Plating fender does not have much choice, so another choice may be better if the number of choices increases...
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
The product is nice..
Open it. Bolt kind comes with RoseRose, there is no Instruction Manual, it is the worst. A shop!
It is the first time. There are such sloppy shops!
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
The product is nice..
There is no manual, Bolt kind does not enter the bag RoseRose, too complicated and there is no instruction manual, you will not talk. So much, there is no complicated Instruction Manual, Shop is the first time. View detail
Is good
If a totally ordinary car changes to this Fender it looks like an out-of-print car !!
I got lost as Z2Type's Front fender, but I also have a light impression here.
A little luxury feeling came out with Chromium Plating compared with OEM !!
It may be good to rustproof on the Reverse side. It became the best shopping.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Special item is good.
I used my own Fender Eliminator until now, but I purchased it in accordance with Mr. DOREMI's Exterior Kit purchase. It is still only a special item, the feeling of Fit is the best for you. Because it is made so that it can slide back and forth in the installation, you can fine-tune it to your liking as far as the outgoing condition of the Tail lamp.
I replaced Bolts with stainless steel in order to counter Rust.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Exchange from homebrew Fender Eliminator
I purchased it according to DOREMI's Exterior Kit purchase.
Since some adjustments are necessary as it is tightly fitted to the exterior, it is a good sense of unity with the Exterior Kit.
View detail
Quite impressed by this part, high quality moulding and absolutely perfect fit. Manufacturer has taken a lot of care to make this part perfect. Very light, very strong. Only thing to note is guard is made to fit 19in wheel, if you use 18in wheel the
Quite impressed by this part, high quality moulding and absolutely perfect fit. Manufacturer has taken a lot of care to make this part perfect. Very light, very strong. Only thing to note is guard is made to fit 19in wheel, if you use 18in wheel the gap is bigger which is not a big issue but looks better with a 19 inch wheel. Great for someone who wants their bike to look more modern and different from all the other Kawasaki's. View detail
Plating claims its presence!
Steel, so I worried about rust and sprung a rust-proof Spray on the Reverse side. Installation completed in about 10 minutes. It was a pity that there was not a vacant mounting hole for the Meter cable available in the OEM's Fender. With Plating at FRP, I thought that it was possible to reduce weight.
However, it looks very prominent, Parenthesis gets better and is the best.
View detail
I am very satisfied with the goods, everything as described, perfect fit and also very good in terms of workmanship and surface.
I am very satisfied with the goods, everything as described, perfect fit and also very good in terms of workmanship and surface. View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
The result of having wanted to reproduce Z2 Rear view of yearning by an own car ZEPHYR1100, and having examined the Fender less kit of various Manufacturers, raising some prices -- it is -- although -- it became brave very much -- if the Z2 Type Tail-lam
The result of having wanted to reproduce Z2 Rear view of yearning by an own car ZEPHYR1100, and having examined the Fender less kit of various Manufacturers, raising some prices -- it is -- although -- it became brave very much -- if the Z2 Type Tail-lamp & Tail cowl of the company is attached even if it makes and comes out and says very -- a complaint -- I will attach -- although -- there is nothing -- to the extent that -- being perfect . The product made from a DOREMI was used and it was a correct answer! Since the portion which are the Steel attachment Bolt and Nuts and which requires mud and water was sorry about even free, I wanted you to use the product made from a STAINLESS STEEL. Except it, it sees synthetically and is O. View detail
Fits: KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4)
The LTD Fender which serves as a time-tested product when the Front of Webike Monitor z is formed into 18 inch. pure medieval times do not have a good thing of a grade, and it still deals with at the large sum by the auction. when it would
The LTD Fender which serves as a time-tested product when the Front of Webike Monitor
z is formed into 18 inch.
pure medieval times do not have a good thing of a grade, and it still deals with at the large sum by the auction.
when it would attach to
19 inch, it purchased, but it was except that firm for made in Taiwan it makes and comes out and there is no brown that it is also pure.
The DOREMI reproduced the good thing.
View detail
The fender for 750 was attached to the zephyr chi. Since it turned out that a hole location etc. are different, it was bought with nothing to lose, but the hole was extended with the file for a while, only the front side put in the spacer, the bolt wa
The fender for 750 was attached to the zephyr chi.
Since it turned out that a hole location etc. are different, it was bought with nothing to lose, but the hole was extended with the file for a while, only the front side put in the spacer, the bolt was changed, and it was OK perfectly.
The hose clamp also bought metal fittings in the home center, attached the original article, and became very much smart.
Having considered the price, the plating fender was a satisfying enough thing.
The rear face merely considered silver paint application as the anticorrosive in consideration of rust.
From now on, a touring season will be greeted and feeling is merry.
View detail
Since quantity started beyond anticipation when the amount of money was checked in order to attach and purchase a wound pure, plating of the doremi was chosen. processing on the back is bad -- immediately -- rust -- since that was right, clear paint a
Since quantity started beyond anticipation when the amount of money was checked in order to attach and purchase a wound pure, plating of the doremi was chosen.
processing on the back is bad -- immediately -- rust -- since that was right, clear paint application was performed.
Although it passed half a year, rust has not occurred.
Although the location of four bolt holes was narrow although it was attachment, and not suited, attachment was completed somehow.
moreover, since the hole of the hose clamp was also large, it stopped installing [ which can take if it runs, and meets ], since it came out and carried out.
Although the quality of the product did not become a talk, its style is perfect with a sufficient parenthesis.
A price also thinks that it is handy.
View detail
The exchange from normal was completed in about 10 minutes. Although a size is not different from normal and it is comfortable for appearance, it is considered as very different [ widely / the buff credit marks of a thing with the bad quality of plati
The exchange from normal was completed in about 10 minutes.
Although a size is not different from normal and it is comfortable for appearance, it is considered as very different [ widely / the buff credit marks of a thing with the bad quality of plating, a thin thing, and a ground being able to be seen, or plating having separated in part ] from the high grade feeling.
Shortly after not carrying out wax credit briskly, it is .... full of rust.
In addition, since the hole of a brake hose guide is also larger than normal, if only inserted as it is, it will separate during a run.
View detail