Reviews
It's a far cry from NORMAL.
Up Fender is good, but exchanged for Makeover
I'm using it as it is in the buLock tieya, but it's totally alright!
Installation was very easy and good.
It would be better if it were a little cheaper.
View detail
Satisfied, except for the price.
It would be nice if the price was a little lower, but it is perfect for Motorcycle makeover.
Installation can be a bit of a challenge, so take your time and install it when you have time to spare.
View detail
It combined with the front fender and purchased. If it attaches as a description, it will be attached simply. It is better to perform center ply firmly. Since the edge portion is sharp, handling should take care.
It combined with the front fender and purchased.
If it attaches as a description, it will be attached simply.
It is better to perform center ply firmly.
Since the edge portion is sharp, handling should take care.
View detail
I'm glad we went Middle short
Installation of Fender and Bracket, Installation of Fork and fine tuning of Fork I used it... there are a few Stain-like scratches on the front of the Fender and I used Compound to lightly scratch the front of the Fender The polish was removed to some extent The front wheel part becomes light and is Refreshing I'm glad I did View detail
Good quality, but maybe a little pricey
I installed it on a 2017 MODEL CB1100EX with no problems
The quality is good, but I wish the price was lower
If you have a Fender Eliminator or a short fender on, you can use I think it's a good idea because it makes the front area look lighter
The photos are of the Fender after and before it was replaced
View detail
Functional performance aspects Cover itself is good
Motorcycle Parts Overall
Why do you make Reduction in cost with a little thing?
Overall it is very good
Bolt included Stainless Nut Steel iron
How many yen Reduction in cost are you targeting for reason not to make Nut Stainless?
I liked the shape of Body itself as I was thinking in length as well! As I put it out for Anodized processing immediately, the light is duller than this product, but it is a good feeling in Buffing before Anodized
Installation precision is provisional, but there is also free length and its neighborhood is also good
Body is not Fork mounting part is Stainless material
I think that it would be considerably lighter if Aluminum was there, so that VERSION would have been chosen if it came out!
One Bracket feels heavier than Fender
Before mounting it may be remade from the included Bracket by size measurement It feels so heavy and private
Overall it's a good Fender
BracketStainless Mounting NutSteel iron
It is the factor that only went down
View detail
Front fender
Good quality front fender and a nice replacement to give my sr400 a cafe racer look. Looked just like the pictures and fitting was super easy. Would definitely recommend this product! View detail
It had won, when it subscribed for the Monitor Campaign of 250TR of No. 3 and he noticed it. Thank you. Although it was , now a Front fender, and he did not necessarily dislike the size of a NORMAL, and height, the whole car body looked large and th
It had won, when it subscribed for the Monitor Campaign of 250TR of No. 3 and he noticed it.
Thank you.
Although it was
, now a Front fender, and he did not necessarily dislike the size of a NORMAL, and height, the whole car body looked large and the one who likes the being collected into the Compact way was looking for the Fender exactly.
Since eyes were attached, it worked happily.
Attachment was able to be relieved in the structure in which the
Aluminum became brave.
However, it is the grade which would like you to make a description carefully to a slight degree.
If it attaches, atmosphere changes drastically and is satisfied with the compactness of oneself liking.
I think whether it is also good to apply an Anodized some day.
Also making
is solid and it is recommended.
View detail
Since the Rear fender of the NORMAL was large anyhow and it had jutted out, it had been searching. Although the Fender concerned also suited the visual field, since the Monitor was won when it was hesitating, in order that a price might stretch a little,
Since the Rear fender of the NORMAL was large anyhow and it had jutted out, it had been searching.
Although the Fender concerned also suited the visual field, since the Monitor was won when it was hesitating, in order that a price might stretch a little, it equips thankfully.
It combined with the
Front and was shapely finished in the Compact.
The car body of 250TR which looks large unexpectedly feels it refreshed, and is satisfactory.
Although it cannot say that a description is not much polite and wavered somewhat, it can work in general favorably.
Also making
is solid and it is thought that it was good-looking and was collected finely.
It is a Parts in which
custom-made heat is likely to rise.
Elegance made to regard as liking to apply an Anodized some day and to strengthen an Impact.
I think that he would like to already come to click when the price of a few is cheap.
View detail
Since he did not like an authentic positive one, it exchanged. It is slightly too short and I have come to think kana these days. Since it does not understand whether it is favorite die length unless it equips after all, they are four stars. W
Since he did not like an authentic positive one, it exchanged.
It is slightly too short and I have come to think kana these days.
Since it does not understand whether it is favorite die length unless it equips after all, they are four stars.
We recommend you purchase after the direction which considers purchase checks the form of its KASUTAMU.
The parts themselves are five stars!
View detail
Since it had got bored with an up fender, it changed. The impression changed with GARATSU from the atmosphere in character with an off vehicle, and it became a classic. Since he had heard that jumping was fairly tight when it was a very short, alt
Since it had got bored with an up fender, it changed.
The impression changed with GARATSU from the atmosphere in character with an off vehicle, and it became a classic.
Since he had heard that jumping was fairly tight when it was a very short, although it was made middle, the balance of die length is also well pleasing.
Although a stainless is also good, I think that the feeling potato taste of aluminum may suit.
View detail
It changed to that made from WM simultaneously with a front fender. Atmosphere changed at a stretch because the order fender became aluminum, and it became a classical. I think that it will go to a smooth if work, such as having taken pains over r
It changed to that made from WM simultaneously with a front fender.
Atmosphere changed at a stretch because the order fender became aluminum, and it became a classical.
I think that it will go to a smooth if work, such as having taken pains over removal of a pure fender and positioning in the case of attachment, is done by two persons.
View detail
A vibration sound carries out until it equips and continues up to now. Although it is a grade worried for a while, I think because stay and a front fork touch delicately. appearance is individually awesome -- I think that it is good for ~ HIJO ~ ^
A vibration sound carries out until it equips and continues up to now.
Although it is a grade worried for a while, I think because stay and a front fork touch delicately.
appearance is individually awesome -- I think that it is good for ~ HIJO ~ ^^ .
View detail
Appearance became very good!!! Since it is becoming white even if it is repairing, since it is a product made from aluminum but, the stainless is better if you would like to be by motorcycle of a polished.
Appearance became very good!!! Since it is becoming white even if it is repairing, since it is a product made from aluminum but, the stainless is better if you would like to be by motorcycle of a polished. View detail
It purchased and attached by the front and a set. The impression was quite easy coming to change.
It purchased and attached by the front and a set.
The impression was quite easy coming to change.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800
Looks good is carried out, and after attachment also attaches a fender body, it is done by the flow of attaching U-shaped stay, and it is possible for a smooth. However, if the fixing position of stay is not tuned finely, chatter sound will come out d
Looks good is carried out, and after attachment also attaches a fender body, it is done by the flow of attaching U-shaped stay, and it is possible for a smooth.
However, if the fixing position of stay is not tuned finely, chatter sound will come out during a run.
View detail
The texture of aluminum is good. Attachment is also only attached with an easy and pure bolt. It can also be removed that an arch type is likely to be decorated.
The texture of aluminum is good.
Attachment is also only attached with an easy and pure bolt.
It can also be removed that an arch type is likely to be decorated.
View detail
The touch with which it equipped is a good atmosphere. Although attachment is not so difficult, if there is cookbook to a slight degree, I will think that it is good.
The touch with which it equipped is a good atmosphere.
Although attachment is not so difficult, if there is cookbook to a slight degree, I will think that it is good.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800
Although it wavered with the short fender of the daytona, it decided by the low price of the price. You come out fluently. since the raw material was a thing with aluminum, you are cheap -- although ~ was thought, it was a thing firm in practice with
Although it wavered with the short fender of the daytona, it decided by the low price of the price.
You come out fluently. since the raw material was a thing with aluminum, you are cheap -- although ~ was thought, it was a thing firm in practice with wall thickness.
It is very pleasing.
View detail
It combined with the rear fender and purchased. If it attaches as a description, it will be attached simply. Stay spreads very well in a screw clamp. It is better to screw up a screw thread uniformly [ right and left ]. Since the edge port
It combined with the rear fender and purchased.
If it attaches as a description, it will be attached simply.
Stay spreads very well in a screw clamp.
It is better to screw up a screw thread uniformly [ right and left ].
Since the edge portion is sharp, handling should take care.
View detail