Reviews
Active License Plate Holder attached.
[How is it used?
I replaced the OEM Fender with this Fender Eliminator Kit from KITACO. I wanted to use Active's License Plate Holder with Blinker, so I installed it in the place where only License Plate was originally installed.
Was the one you received as per Image?
It was Black as shown in the Image.
Was the installation difficult?
I could not install one because the part that attaches directly to the vehicle body requires four Bolts to be passed through the hole while holding it from the back, and a collar must be inserted between them.
How was your experience with it?
Even with three pieces, if properly tightened, it did not wobble. I took a long trip after installation and it was Large sturdy.
[Included Parts:were they on?
It was attached properly. I think that is the way it is with all products, but I had a problem when I lost it because there is no spare number of Screws and so on.
[Was there anything that disappointed you?
This is because I added Active's License Plate Holder, but when viewed from the side, it stands out because of the hole for the OEM Blinker.
Other items that would be helpful
Installation Point or hang
I think it is possible to do it with two people while holding down all four Bolts./Availability and comprehensibility of Instruction Manual/Points to note/Items to be purchased together/Opinions and requests to the Manufacturer
View detail
When in doubt, this is the one. I'm glad I did.
[How is it used?
Duration:from about April 29, 2017 to as of September 10, 2023. Only the Blinker Bracket was removed at some Timing
Distance:approx. 68,197 km
Combination items:ACTIVE Reflector Kit Slim, POSH Faith Aluminum License Plate L Size, CF POSH SUS Number Plate Fixing Torx Taper Bolt & Nut Set
Was the one you received as per Image?
The product is exactly as pictured in the Image.
Was the installation difficult?
I think it was troublesome because I didn't know how to remove the cowl at all just after I switched to a new car. Furthermore, it is necessary to remove the seat and tail cowl, not the front part of the vehicle including the SIDE, which is usually removed for maintenance, so even now that I am used to it, I think it is still troublesome. Except for the removal of the cowl, the installation itself is not difficult.
How was your experience with it?
The installation of the Tandem seat naturally causes mud splashes to hit the Tandem seat, which is a cause for apology.
Since the most protruding part is the Tire or Tail cowl, the distance that can be retreated back is slightly increased for the same Space.
Since the Number is placed far forward, and the upper part of the Number is unguarded except for the bracket, the possibility of bending of the lower part of the Number due to a side bag or accidental human impact is increased.
Since all parts are RoseRose, OEM blinkers can be implanted in the beginning, and later, when blinkers are replaced, only the relevant parts can be targeted and removed, creating a clean look at all times.
Note that the Reflector, which must be used in conjunction with the Reflector, is not included in the package.
Probably sturdy, as it has not broken even with the aluminum plate, different bracket and blinker that are not included in the package.
The LED License Plate Lamp is also still reliable, as all four are still building materials.
The vehicle has been inspected as is, so it probably passed. (Vehicle purchased before the revision of the standards)
[Included Parts:were they on?
As shown in the product image.
[Was there anything that disappointed you?
I guess there isn't because there is nothing to be concerned about.
Conformity of License Plate with revised standards
Before revision Being able to read." It is not clear whether the safety standard is met for vehicles with clearly defined angles after the revision, since it has been in use since the time of the
This is a standard item that can be found at most Large Mortgage Motorcycle stores, and many riders have probably used it. It is a recommended product that can stand up to the mud and the mileage.
Since the revised criteria are unknown, the risk of BonusPoints being added when caught in some cases should be considered.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
No complaints about both Design
Front Fender is available from various companies, but we decided on this one without hesitation.
Carbon is also good.
I have nothing to complain about with it on.
Fitting is also no problem.
I changed it to Titaniumium Bolt and put it on.
View detail
Bolt holes match, so it is possible to mount the bolt.
[How is it used?
Last 2CycleMotorcycle of my life!" KDX220SR was purchased used with great enthusiasm.
Since the vehicle is over 20 years old, it is inevitable that the exterior will become crusty due to UV rays and age-related deterioration.
Since the design of the Front Fender has almost no connection with other refurbished panels, we dared to purchase and install a product with the same design as the current Kawasaki off-road model, regardless of the design at the time of its release.
It may not be suitable for those who want to finish with OEM parts of the time, but I personally feel no discomfort, and I think it was a good purchase because it is difficult to be distorted by wind pressure while driving and the handlebar is not taken off while driving on the highway.
Did you receive the item as per the Image?
The product was exactly as shown in the Image because I had to confirm that it was the same design as the vehicle currently being discussed by Kawasaki.
Was it difficult to install?
It is an extremely simple job, simply remove the four Front Fender mounting bolts that were originally installed, remove the wires, and then install them in the reverse order.
How did you like it?
There is a gap of more than 20 years between the exterior design of the Front Fender and Others installed this time, but I personally do not feel much discrepancy.
Is this because it is not installed consecutively with other exterior parts as mentioned above?
I don't know if it's because I'm replacing the light cowl with a product from another Design company. (OEMLight is too dark and has been replaced with a light cowl that can be fitted with H4Type Valve). 。
Ultimately, if the owner likes it. (This is based on the assumption that Large is not a nuisance to those around you.) I don't see any problem with what a third party can say.
It is a world of complete self-satisfaction, but I am happy just looking at my car in its Beauty exterior.
Was "Included Parts:" attached?
Front FenderBody only, no Included Parts:or Instruction Manual.
Were there any disappointments?
Nothing personal, I am Large satisfied because I was able to purchase a product of the same design for a little less than OEM Product.
Other items that would be helpful
Point and hang of installation
In a sense, this product is also like OEM parts, so there is no hang or anything, but it is definitely better to temporarily assemble the product and adjust the overall adjustment before fixing it in place, just to be sure.
[Availability and clarity of the Instruction Manual
No Instruction Manual, no, but as noted above. All you have to do is remove the same type of parts that were originally installed and install them in the same way." So I don't think Instruction Manual is necessary.
[Notes]
Nothing in particular, if it is an Other Brand Product. Screw holes won't fit." However, this product has no Bolt hole gap and can be assembled without any problem.
The bolt holes are slightly wider to allow some forward/backward movement for balance adjustment. "Temporary group." I would recommend that this fixation be made from
[ITEMS TO BUY TOGETHER
Since the motorcycles themselves are more than 20 years old, sales of OEM parts as well as other brand products are about to end.
It may be a good idea to Stock items that can be replaced while they can be purchased and parts that may need to be replaced in the future.
[Opinions and requests to Manufacturer
We look forward to a long and continued Lineup.
View detail
The type 2 down fender bracket has a highly detailed centre bracket that really enhances the look
About quality and texture, I can confirm the quality great and the materials used are a combination of aluminum that is CNC machined to shape and finished with a silver anodized coating for the centre bracket and steel plate that is perfectly shaped and finished with a black powder coating for the side brackets.About the feeling of use, The type 2 down fender bracket has a highly detailed centre bracket that really enhances the look of the front fender in the lowered position.Products to buy together, By relocating the front fender from it's original position you have removed the ability to secure the front brake hose, the addition of a fork leg clamp to your cart would be recommended to bring back this ability.Difficulty of installation, I can say the fitment of the type 2 down fender bracket for my installation was easy due to the ease of access to all the mounting points and included hardware for assembling the kit.Cost performance and comparison with other products, The pricing of this product is great as you are receiving higher quality materials with a higher quality finish then the cheaper priced options are offering.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA CB400SB VTEC REVO, HONDA CB400SF VTEC REVO
Installation on cb400sf nc42 late model
The twill weave Carbon fender by FalseDesign has a great texture and the footing is excellent.
Carbon is cool too.
As for the installation, it seems that it is possible to install the suspension from the rear without removing it, but I could not install it from the rear no matter how hard I tried, so I removed the suspension and installed it.
It may be difficult for beginners in maintenance.
Cosmetically, I think it is a good idea.
I think the construction is good for the price, and the price is good for Carbon.
However, I ordered in February of this year and it came in September, which extended the delivery time by two months, so if you can wait patiently when ordering, why not order?
View detail
Z125pro (last model) with Daytona Fender Eliminator Kit
[How is it used?
Attached to Motorcycle for daily and leisure use
Was the one you received as per Image?
Yes
Was the installation difficult?
Installation of the Kit itself is not difficult. However, it is difficult to remove and install Kawasaki's OEMBlinker. This is not only Z125pro, but also other models. Also, this model has a Blinker Recall, and Motorcycle here has had a countermeasure put on it. I don't know if it was because of that work or not, but the screws for attaching the Blinker to the OEM Fender were unusually tight, and it was quite large and strange to remove them.
How was your experience with it?
The Motorcycle here had an external Grab Bar attached to the OEM Fender, so the Fender position was moved downward and backward about 1 cm to begin with (the fixing Bolt was changed to a slightly longer one when the Grab Bar was installed).
The Fender Eliminator Kit was also installed with the Grab Bar installed, so the Style must be slightly different from what the Manufacturer envisioned. However, as you can see in the photo, the body of the car looks much more compact and approximately the same as the Image.
I was a little concerned about whether the Grab Bar and this Fender Eliminator Kit could be installed at the same time, but there were no problems (the manufacturer does not say anything about it, so it is your own responsibility).
Other companies' products may look neat, but I think this one sells OEM-like appearance, so it depends on your preference which one you prefer. I have DAYTONA's Fender Eliminator Kit on my other car (not EdgeSeries), and the quality of DAYTONA products is excellent.
[Included Parts:were they on?
The bolt that holds the number has a decorative element that can be used to make it look more stylish. The LED License Plate Light also works fine as per the Instruction Manual.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Instruction Manual is very detailed, so I don't think there is any problem in not knowing how to install it. The only difficult part is the removal and installation of the OEMBlinker. As for tools, I think you can turn a hexagonal tool with an L-shaped Wrench, but it is better to have a solid socket.
View detail
Can be attached to JC92 2023 MODEL.
Installation Instruction Manual can be downloaded from our website, it is not attached for environmental protection.
With a cold drink in hand, even a novice like me could install it in about 40 minutes.
The quality is a trusted Endurables product, so there are no holes in the mounting position, no machining, no bali etc.
It is a little bit of a little bit.
Since Wiring will be partially exposed, flooding treatment is required by each party.
View detail
Other License Plate Holders can also be used.
[How is it used?
I purchased this product because I wanted to add Active's License Plate Holder with Blinker.
→License Plate Holder with ActiveBlinkerhttps://www.webike.net/sd/9391707/
Active's required more Wiring processing, so now we are diverting the OEM Blinker.
There are Fender Eliminator Kits that have all the parts in one package, but this product is divided by parts, so the angle of the number can be adjusted by adding movable parts at the base where it is attached.
Was the one you received as per Image?
The black color matched the Graphite black of the car body and was just as in the image.
Was the installation difficult?
The CBR250RR Fender replacement itself is quite a hassle, so it was a struggle, but we were able to install it without incident.
How was your experience with it?
I was very happy with the clean look.
[Included Parts:were they on?
All the Included Parts:were attached.
[Was there anything that disappointed you?
I thought it would be a little lighter, but it feels rather heavy when I hold it.
But I think it will be much lighter since the OEM Fender weighs about 1 kg.
[Availability and clarity of the Instruction Manual
Instruction Manual was included. I think there was nothing in particular that I didn't understand as I was going through the blog and other information.
Other items that would be helpful
Points and hang of installation/Points to note/Items to be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650
very nice quality perfect fit
item arrived fast to USA and in perfect shape. Very well packaged. fender is high quality and is almost polished with very slight brushed look if you couldn't tell from the pictures. View detail
Satisfied
I consider it such a necessity that I decide to install it when I take delivery of the car. View detail
Fits: BMW RnineT, BMW RnineT, BMW RnineT /5, BMW RnineT Pure, BMW RnineT Scrambler, BMW RnineT Urban G/S
Satisfied
Purchased to prevent dirt inside Fender
I think it works personally.
View detail
Make your tail look more concise
This is a recommended product. After installation, the more compact and wide tires are fully exposed. It is very sexy and you don’t have to worry about driving on watery ground in time. When you install it, the left and right turn signals will loosen, but it’s not very big. For the problem, you can find two gaskets to increase its contact area so that it can be fixed firmly and will not loosen during driving --------------------------- -------------------------------- This is a more concise and wide tire after installation that is worth recommending products. completely exposed to a very sexy and timely driving on the ground with water. You don't have to worry about it when it will be thrown to the back installation. You can find two pads to increase its contact area so that you can fix the firm driving and will not loosen Powered by Google Translator View detail
Incredible value
Bought the Doreme bodykit, had it sprayed myself ,my Zephyr 750 looked great but I felt something was missing so I bought this chrome Madmax front fender to replace the original painted Zephyr front guard. WOW what a difference! If I say so myself my bike looks fantastic now a real head turner, this guard is not metal or chrome but still fits and looks incredible. Top marks to Webike for great price and fast delivery too. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It came with a '23 GSX1300R HAYABUSA.
It may be a little expensive, but the product was well made.
The Tie Wrap fastening is a little minus point.
Otherwise, I'm happy with it
View detail
nice product for zoomer
It's easy to install The rear fender was removed, so there was a lot of rain, so I think I can act as a rear fender. And most importantly, the checkerboard pattern is cute. View detail
Good linear design
Drilling is required for Universal Product.
A drilling Guide Template is included in the package and is specified for each car model.
Since the Template is a Seal, paste it into the Fender as it is. In this case, there is a form on the Fender side that tells you to paste it here, so follow it.
Then, drilling was done with Drill to complete the process.
I was worried that the holes might actually be gapped because it is an overseas manufacturer. So I traced the position of the holes on the Fender that came with the car and tried to match them to the Template, and found that they were almost the same, so I believe the Template that came with the car is large and strong enough for my model.
It is also lightweight, so it is supposed to make turning around much easier. However, when driving in the dirt or in the rain, it makes no sense at all, so we think it is safer to return to normal fender.
View detail
Best product for the price!
This is one of the most expensive Fender Eliminator Kits available, which is why it has a satisfying and luxurious feel to it.
The Aluminum Cut-Out Body has a luxurious feel that is different from inexpensive kits that are simply folded steel plates.
The quality and precision are unquestionable, as you would expect from OverRACING.
It was a little more difficult than expected, and required some dexterity in the wiring process and the need to support four bolts and collars of the mount at the same time. But if you take it one at a time, you should be able to do it without any difficulty.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Installation is easy
The price is overwhelmingly low, and since it is Black Gel Coating, I think it is supposed to be painted, but I am not particularly dissatisfied even if it is installed as is. The instruction manual is very detailed and the wiring installation is easy. View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
Refreshing with Slim design
I bought it because I wanted it to look Refreshing and Sexy from the back.
I am quite satisfied with the design, which is slimmer than other products.
I think most of the other companies' products are a little more blobby.
With this product, it seems as if it is integrated with Cowl.
The Instruction Manual was easy to understand and the DIY installation was a breeze.
View detail