Reviews
It seems that it has the composition of having considered the directions of stress, such as a mounting direction of each part article, and a crack could not enter easily, either, if it is this. A number LGT is also the good result. However, even i
It seems that it has the composition of having considered the directions of stress, such as a mounting direction of each part article, and a crack could not enter easily, either, if it is this.
A number LGT is also the good result.
However, even if the number mounting angle is sleeping to a slight degree, I think good kana.
(It will not be caught by any means, if it is this angle!)
View detail
Although the stepping stone to rear suspension strayed with the product made from carbon been [ the product / it ] worrisome and purchased, FRP was used because a price is different near double. Since I think that there is cost effectiveness which is
Although the stepping stone to rear suspension strayed with the product made from carbon been [ the product / it ] worrisome and purchased, FRP was used because a price is different near double.
Since I think that there is cost effectiveness which is not uncomfortable considerably even if the surface preparation of a gel coat is beautiful and it attaches it without paint application as it is than expected, it is recommended!
View detail
It is very much out of stock, it waited about two weeks, and arrived at last. It is Wright 1 piece as ! attached instantly around 21:00, and is working starting. Working-as manual about 1 hour. Any repair cannot be found and it is the completi
It is very much out of stock, it waited about two weeks, and arrived at last.
It is Wright 1 piece as ! attached instantly around 21:00, and is working starting.
Working-as manual about 1 hour.
Any repair cannot be found and it is the completion of wearing.
When in play [ of other Users of the ] had to be seen and the cord of the blinker had to be extended, it was, but according to the device of management, it was OK with normal.
Touch of formation was also wonderful and fitted in tightly.
Since GSR was a circumference of rear one which has peculiar power of expression too, it was able to carry out [ carbon ]-izing, without breaking this down.
furthermore, a scoop type fender -- a feeling of MOSSARI -- although it came out rapidly and carried out, it was felt refreshed with this product.
This is a recommend!
View detail
Appearance feels it refreshed and preeminent for combination with a single seat cowl. Stay is dramatically solid and reinforcement also has no something to say. As a difficulty, there is much number of parts count and attachment is a little troubl
Appearance feels it refreshed and preeminent for combination with a single seat cowl.
Stay is dramatically solid and reinforcement also has no something to say.
As a difficulty, there is much number of parts count and attachment is a little troublesome.
Moreover, on the whole, a description is coarse and unclear.
Since the price is conscientious, it is a three stars by synthesis! It will be a five stars if it says only by a thing! It equips with a reflector after * photography.
View detail
Fits: KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS, KAWASAKI ZEPHYR1100RS, KAWASAKI ZEPHYR1100
The carbon fender of preparations and a coerce was attached for BOTETSU and a feeling of the pure fender as the refreshing. It collects and is pleasing as the aim. Although the part and mud splashes to which back merely became short increase, it d
The carbon fender of preparations and a coerce was attached for BOTETSU and a feeling of the pure fender as the refreshing.
It collects and is pleasing as the aim.
Although the part and mud splashes to which back merely became short increase, it does not care about them so much.
It is very cool.
View detail
He is quite smart after attaching like a photograph. However, unless it has equipped with the fender less kit, from back, it is not conspicuous. Is it satisfactorily conspicuous if it is from width? Since there is no description about attachme
He is quite smart after attaching like a photograph.
However, unless it has equipped with the fender less kit, from back, it is not conspicuous.
Is it satisfactorily conspicuous if it is from width?
Since there is no description about attachment, there is only investigating by oneself.
If that is seen since there is a place which explains attachment by the blog of Ninja250R now, I will think that it is good.
(Its blog also explains briefly)
View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF
the time-tested product of a refreshing comes out [ appearance ] custom -- the shin. An image changes considerably only now (^-^).
the time-tested product of a refreshing comes out [ appearance ] custom -- the shin.
An image changes considerably only now (^-^).
View detail
RIA feels it refreshed, and an LED number plate LGT has it like a fluorescent light, and it is very good touch. [ bright ] Since the base is firmly made of a metaled plate, the hook of a touring net, etc. are hung.
RIA feels it refreshed, and an LED number plate LGT has it like a fluorescent light, and it is very good touch. [ bright ]
Since the base is firmly made of a metaled plate, the hook of a touring net, etc. are hung.
View detail
Although the motard fender made from a daytona was stuck before, it changed into the time-tested UFO aerofender. From Aceh or a daytona, there is no sharpness and a favorite is carrying out the pure twist refreshing. I think that the front number
Although the motard fender made from a daytona was stuck before, it changed into the time-tested UFO aerofender.
From Aceh or a daytona, there is no sharpness and a favorite is carrying out the pure twist refreshing.
I think that the front number and affinity of the same UFO are an outclassing.
View detail
It purchased in order to build the space which sets ETC to under a sheet GSX1100S (black). although it is that which has improved very much (firmly -- & -- beautiful) -- one point. When it is going to attach a plate holder to number plate protecti
It purchased in order to build the space which sets ETC to under a sheet GSX1100S (black).
although it is that which has improved very much (firmly -- & -- beautiful) -- one point.
When it is going to attach a plate holder to number plate protection, since the attachment hole is just before the upper, a device may be required.
View detail
Fits: YAMAHA FZ-8 FAZER, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-8
Since the price was cheap, this was chosen, but structure is also very solid and he is smart. Although it had written that a tail cowl was removed, attachment was able to be attached even if not removed. However, it is although workability was not
Since the price was cheap, this was chosen, but structure is also very solid and he is smart.
Although it had written that a tail cowl was removed, attachment was able to be attached even if not removed.
However, it is although workability was not good and being carried out.
Although wiring of the number LGT is a plug terminal, the thing of attachment to a kit is an easy thing which can be attached without a press-fit tool.
Since it was disagreeable to have damaged the original wiring, a plug terminal was bought, it was stuck by pressure and I connected.
View detail
Fits: HONDA CB400SF Revo, HONDA CB400SF SPEC II, HONDA CB400SF SPEC III, HONDA CB400SF VTEC
Whether sports type motorbike-likeness will be taken out, a fender less, and simultaneous purchase. Although written as the 99-06 model, the 08 model Revo has been equipped. Since there is also no portion in which it interferes especially and the
Whether sports type motorbike-likeness will be taken out, a fender less, and simultaneous purchase.
Although written as the 99-06 model, the 08 model Revo has been equipped.
Since there is also no portion in which it interferes especially and the bolt hole also suited, it seems whether it is satisfactory.
It is necessary to remove one side of a rear shock for attachment.
At NK, although it is not parts with which it is as conspicuous as SS, in a direction to put a sports element into, it is a recommend.
Since it is merely interfered (a rear shock's is removed again to remove and it is ...) a little at the time of a car wash, it is *-1.
View detail
Appearance became very good!!! Since it is becoming white even if it is repairing, since it is a product made from aluminum but, the stainless is better if you would like to be by motorcycle of a polished.
Appearance became very good!!! Since it is becoming white even if it is repairing, since it is a product made from aluminum but, the stainless is better if you would like to be by motorcycle of a polished. View detail
It purchased and attached by the front and a set. The impression was quite easy coming to change.
It purchased and attached by the front and a set.
The impression was quite easy coming to change.
View detail
It has been one year since it attached to HONERT. Please give me attachment at the time of motorcycle purchase. If it has not attached, I will think thoroughly that a car wash will be troublesome. Those who regard their own car as it riding fo
It has been one year since it attached to HONERT.
Please give me attachment at the time of motorcycle purchase.
If it has not attached, I will think thoroughly that a car wash will be troublesome.
Those who regard their own car as it riding for a long time recommend you to attach some prices, even if it bears.
Moreover, HORNET is recommended also in the direction which thinks that the circumference of rear one is somewhat lonely by Kami of appearance.
In fact, it was the cause which was regarded as my attaching by appearance serious consideration from a practical use side.
View detail
I, the amateur, was also attached. The time of taking brand-name parts suffered troubles most. Although a description is by no means polite -- It becomes somehow well. If said by force, how to use the coupler of LED wiring wavered. The see
I, the amateur, was also attached.
The time of taking brand-name parts suffered troubles most.
Although a description is by no means polite -- It becomes somehow well.
If said by force, how to use the coupler of LED wiring wavered.
The seen touch after wearing becomes good ^^
View detail
This product is adopted from a thought that he would like to equip with the low price made from FRP, and the thing of the body color same color. It equips after private paint application as well as a previous introducer. Although the product made
This product is adopted from a thought that he would like to equip with the low price made from FRP, and the thing of the body color same color.
It equips after private paint application as well as a previous introducer.
Although the product made from carbon takes pains over popular inside paint application, it may be one choice which shows the difference with the surroundings.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X
since my cygnus has equipped with the fender less kit of the company -- the rear fender of normal -- an open state -- since it is ..., it is wearing of Mr. Kitaco's carbon rear fender worried from before! since it is [ be / too much / the clearance of
since my cygnus has equipped with the fender less kit of the company -- the rear fender of normal -- an open state -- since it is ..., it is wearing of Mr. Kitaco's carbon rear fender worried from before!
since it is [ be / too much / the clearance of CHOI and a tire / vacant ] ? when it is a normal tire, although the wearing itself is easy -- * -- it is four.
Carbon is as it is considerably awesome and is, since it is a place which is conspicuous unintentionally. I consider.
View detail
Since a pure blinker and a reflector are transplantable, a natural result [ be / no image ] called an external article is pleasing. Although attachment is not difficult, either, it is safe, if it is recuperated so that a crack may not be given when re
Since a pure blinker and a reflector are transplantable, a natural result [ be / no image ] called an external article is pleasing.
Although attachment is not difficult, either, it is safe, if it is recuperated so that a crack may not be given when removing a seat cowl.
since the heat guard of a muffler will become open if a photograph is seen -- processing -- or is it good to remove?
Although I have removed, there is no fault that a cowl and a tail lens melt.
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200
It attaches and is easy. There is admiration with which the front part became tight with GUTSU. Although I think if cheap to a slight degree .. It is pleased.
It attaches and is easy.
There is admiration with which the front part became tight with GUTSU.
Although I think if cheap to a slight degree ..
It is pleased.
View detail