Reviews
CK44 is equipped although it is CJ44 exclusive use. Although looks are the highest, in order to attach with a Belt cover by a Tapping screw, it is a fault that a hole opens to the Belt cover. It will interfere, if there are only
CK44 is equipped although it is CJ44 exclusive use.
Although
looks are the highest, in order to attach with a Belt cover by a Tapping screw, it is a fault that a hole opens to the
Belt cover.
It will interfere, if there are only about 2~3-mm skimmers with the Tire in a wearing state, they become in
and do not take out a Center correctly again.
Since
redo is not effective, either, it must be said that difficulty is quite high.
-- as [ interfere / at the time of a Bottom / with the Tire-house upper part / again ] --
-- by which a Wound goes into a side face instantly.
true and looks are perfect. -- It is unsatisfactory in respect of accuracy.
View detail
"Since the fender of Inazuma 400 had a crack, I was charmed by the name of carbon and purchased. It is carbon truly!! It is light!!! I thought it but since the normal fender was also resin, it was light enough. The difference in this weight cannot have b
"Since the fender of Inazuma 400 had a crack, I was charmed by the name of carbon and purchased. It is carbon truly!! It is light!!! I thought it but since the normal fender was also resin, it was light enough. The difference in this weight cannot have been felt in my power of insensitivity. If only a fender is black with the car body of silver although I actually equipped, I felt that color is not suited. Since the normal fender was also applied together and was cleaned at the time of all the paint application, it became useless." View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Since the stainless fenderless kit of the other company (Wi) was broken one year and several months afterward, I purchased. The number was blown away and it was terrible! This FRP is Kijima and it is perfect bolt on! Attachment is very easy! Since I wante
Since the stainless fenderless kit of the other company (Wi) was broken one year and several months afterward, I purchased. The number was blown away and it was terrible! This FRP is Kijima and it is perfect bolt on! Attachment is very easy! Since I wanted the fender, it was just right. However, it may be a genuine seat setting, it is long for the semi-double of Daytona! (although it depends on preferences)! I cover my cheeks with the arm band like a punk, since it is unavoidable! View detail
A pure long Fender was not pleasing and it attached the Fender less kit. Although the smartness of appearance had no complaint, it especially attached and attachment took time by favor with a description hard to see. Those who do not have confidence
A pure long Fender was not pleasing and it attached the Fender less kit.
Although the smartness of
appearance had no complaint, it especially attached and attachment took time by favor with a description hard to see.
Those who do not have confidence in
attachment had better leave it to a PRO.
View detail
If it is made cheap, I think that it is good. Attaching by attachment explanation is improper. processing and a device are required.
If it is made cheap, I think that it is good.
Attaching by
attachment explanation is improper.
processing and a device are required.
View detail
[webike Monitor] About attachment, it was easy. It is a Rubber in order that there may merely be no waterproofing performance. The circumference of rear one which necessity used [ the x Refreshing ] as the hole of wiring with the Silicon et
[webike Monitor] About
attachment, it was easy.
It is a Rubber in order that there may merely be no waterproofing performance. The circumference of rear one which necessity used [ the x
Refreshing ] as the hole of wiring with the Silicon etc. in processing is O.
View detail
Fits: SUZUKI BANDIT1250F, SUZUKI BANDIT1250S, SUZUKI BANDIT1250
"Although it is mentioned as for Bandit1250, it can also be equipped to a 1200 oil-quenching final. (1200FEs are also suiting in the description.) Since it is only for the ABS model, 06 models of a non final seem to be useless. I think that attachment wou
"Although it is mentioned as for Bandit1250, it can also be equipped to a 1200 oil-quenching final. (1200FEs are also suiting in the description.) Since it is only for the ABS model, 06 models of a non final seem to be useless. I think that attachment would be satisfactorily possible if a rear cowl can all be taken into pieces. When attached as it is as it may be a bad accuracy, the gap was made between rear cowls and the push pin was not able to be attached. Although two boxes for accessory cases are attached and if it is attached, space becomes narrow, it is better not to attach. Since the bottom of a seat can be used much more widely than a genuin if you do so, it is very good. Although appearance is felt refreshed as a photograph, it does not change dramatically since a number LGT uses a genuine. Since a fender becomes luster, it gets easy to take dirt. " View detail
Black gel specification is purchased. Especially in my case, it was exactly even if it did not process a fitting hole. The exchange to a 140 size tire is foreseen and purchased. Although it is stylish and perfect, cable tie fixation has resist
Black gel specification is purchased.
Especially in my case, it was exactly even if it did not process a fitting hole.
The exchange to a 140 size tire is foreseen and purchased.
Although it is stylish and perfect, cable tie fixation has resistance too.
View detail
The stubbies of the standard could be used, and that was right and it chose the product here. Form is the same as that of a standard, except that the bottom (back) serves as short form a little. About attachment and removal, since this time was th
The stubbies of the standard could be used, and that was right and it chose the product here.
Form is the same as that of a standard, except that the bottom (back) serves as short form a little.
About attachment and removal, since this time was the 2nd time, it was able to carry out to the smooth.
Even if it does not remove a wheel, it can do, but in order to prevent attaching a crack to a fender, we recommend you to recuperate ourselves on the tape for packing, etc.
Although it thought that the accuracy of a product was not quite satisfactory, there is no screw hole processing and it has attached somehow.
This point is a minus point.
View detail
Fits: HONDA APE100, HONDA APE50
It is unavoidable that compare that it is pure, and a wound enters also for attaching also for using a down fender at RIA since it is ? whether hard it will be divided if it bends forcibly? Since it was special plating, I wanted to attach finely.
It is unavoidable that compare that it is pure, and a wound enters also for attaching also for using a down fender at RIA since it is ? whether hard it will be divided if it bends forcibly? Since it was special plating, I wanted to attach finely. View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100
If a fender does not break since it is the right-and-left independence attached easily, it is good, but if the amount of money is held down, I will think a recommend.
If a fender does not break since it is the right-and-left independence attached easily, it is good, but if the amount of money is held down, I will think a recommend. View detail
It is the form of an attached chain case as to why this product was chosen in the rear fender for B-KING currently sold by the manufacturer of [Webike-monitor] some. The first half part of a pure chain case becomes very obstructive in the case of pre-
It is the form of an attached chain case as to why this product was chosen in the rear fender for B-KING currently sold by the manufacturer of [Webike-monitor] some.
The first half part of a pure chain case becomes very obstructive in the case of pre-road adjustment of a rear shock.
nao products do not have the portion drastically.
One step of surface result condition falls compared with the Ma O cull or A-TOCH, it has Poti Poti like air bubbles, or has a surge, or a clear has unevenness, and it cannot say it as an uncanny good result.
Moreover, the location of the screw hole of a chain case is bad, and remade the hole in another location which was parallel about 1 cm.
Since it was not just going to be visible from outside, it was good, but when it was a more conspicuous part, it had just been going to return the goods.
If a rear wheel is not removed, I will think that wearing of a chain case portion is difficult.
Since the tip of the fender is round as the picture, in the height of 190/55 (75W*) of the michelin pilot roads 3, I think that it is difficult to hang a tire warmer.
* The body load of 200/50 tire of normal is 75W, and since it is 73W, even if 190/50 with lower height wears 190/50 and has a certain trouble (I think that a problem does not arise probably since the hayabusa of a brother vehicle is 190/50), it becomes self-responsibility.
There is also a place which refuses exchange depending on a tire shop.
View detail
Fits: HONDA CB400SF Spec-III, HONDA CB400SF Revo
A model will be equipped in CB400SB Revo2011. The circumference of rear one was felt quite refreshed. With the description saved in a DIY group. It can equip only by a fundamental tool. Although the texture of details is ..., it is a level
A model will be equipped in CB400SB Revo2011.
The circumference of rear one was felt quite refreshed.
With the description saved in a DIY group.
It can equip only by a fundamental tool.
Although the texture of details is ..., it is a level which is not worried since it is not a visible place.
View detail
Although an order for [Webike-monitor] twill was placed, the portion into which a number LGT shines just was a plain weave. Although it is specification, I wanted you to make it into twill also there. A one [ be / the first time / this / that it a
Although an order for [Webike-monitor] twill was placed, the portion into which a number LGT shines just was a plain weave.
Although it is specification, I wanted you to make it into twill also there.
A one [ be / the first time / this / that it attaches to two A4 sizes (one substance), and a figure says two like this with the description in which an explanatory note is very simple at about six lines ] was able to regard the attachment description as slightly unkind.
I think that back felt the result very refreshed and it became smart.
View detail
Since it did not care for a pure fender, it exchanged. By having exchanged, a rear tire is emphasized, a stainless plate also shines and it is the highest. ~ which becomes easy to clean the flesh side of a fender. if the road of a demerit is w
Since it did not care for a pure fender, it exchanged.
By having exchanged, a rear tire is emphasized, a stainless plate also shines and it is the highest.
~ which becomes easy to clean the flesh side of a fender.
if the road of a demerit is wet, mud will splash, but since a rainy day does not ride, it is perfect -- it is .
A passive reflector can also use a pure style as it is, and regards it as their being good goods since an automobile inspection is also correspondence.
Although it had a close game for attachment ...
View detail
Since the dirt of the rear suspension circumference was severe at VTR250, this fender was attached. The delivered article is slightly uncertain lightly... Although it and an outside surface were glossy as it is, it attached, after the inner surface ou
Since the dirt of the rear suspension circumference was severe at VTR250, this fender was attached.
The delivered article is slightly uncertain lightly... Although it and an outside surface were glossy as it is, it attached, after the inner surface outside surface painted the clear lacquer just to make sure several times.
Attachment is very easy.
However, although a hole is made in a normal chain guard, ... is also solid after attachment, and hesitation also OKs appearance to it for a moment! The dirt of the important Sas circumference was also eased.
(It does not become dirt zero) If the merit and dirt of appearance ease at this price, I will consider a conclusion as it is better to attach.
a manufacturer's inner fender of this about is pure from the first, and I want you to attach it
View detail
The appearance after attachment is dramatically good. However, the accuracy of FRP was bad and it took pains over attachment dramatically. Moreover, since the hole for wiring of a blinker was not open, it was troublesome. Therefore, they are t
The appearance after attachment is dramatically good.
However, the accuracy of FRP was bad and it took pains over attachment dramatically.
Moreover, since the hole for wiring of a blinker was not open, it was troublesome.
Therefore, they are three stars.
View detail
It attached to a friend's ninja. I think that it is very good since appearance is very smart since it is made of carbon and FRP, and visibility is also finely [ LED ] and brightly high. attachment is merely messy -- it is troublesome. Although
It attached to a friend's ninja.
I think that it is very good since appearance is very smart since it is made of carbon and FRP, and visibility is also finely [ LED ] and brightly high.
attachment is merely messy -- it is troublesome.
Although the description is attached, it is unkind to the extent that it is not called a beginner notice, and since the hole has shifted, processing is required.
Moreover, although it tends to become it is suitable and disagreeable, since it is troublesome by natural ones which are, such as a wiring diagram, it is [ being sushi and ] more troublesome also in that of failure to break down.
If it does not carry out with an idea slowly, I will think that it is useless.
It is troublesome that at least it attaches this.
View detail
Fits: DUCATI MONSTER S4Rs [Monster]., DUCATI MONSTER S4R [Monster]., DUCATI monster s2r1000 [monster]., DUCATI MONSTER S2R [Monster]., DUCATI MONSTER S4Rs [Monster]., DUCATI MONSTER S4R [Monster]., DUCATI monster s2r1000 [monster]., DUCATI MONSTER S2R [Monster].
Attachment required processing. Except the more detailed one to maintenance, I consider that it is better to ask SHOP. Form and texture are wonderful.
Attachment required processing.
Except the more detailed one to maintenance, I consider that it is better to ask SHOP.
Form and texture are wonderful.
View detail
When it arrives, it is light anyhow! It gives the impression of the real carbon ! truly. However, if it is going to equip with whether there was any deviation dimensionally as it is, when clearance with tire (pilot power) left-hand side passes a gap v
When it arrives, it is light anyhow! It gives the impression of the real carbon ! truly.
However, if it is going to equip with whether there was any deviation dimensionally as it is, when clearance with tire (pilot power) left-hand side passes a gap very narrowly, it will have contacted.
Since it is unavoidable, it is used cutting left-hand side 1?.
There is an effect in the preventable contamination of the rear suspension of an aim.
Since there will incidentally be sound if a nail is stepped on, he notices immediately!
View detail