Reviews
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Flexible angles
I was looking for something with an adjustable angle and came across this Fender lessKit.
This was my first time replacing it myself, but I was able to install it without any problems!
I tried to install it, but it stood out because the body is black and the kit is silver, so I painted it black and reinstalled it.
I am satisfied with the product, but if I had to say something, I would say that the License Plate Light is a bit large and assertive.
The angle of the Number can be adjusted, but not the back petals.
(I fix it at less than 40-Degrees inside the regulations)
I use the Nano Blinker, so I have not used the included Blinker sTaperts. I was satisfied with the product for such flexibility!
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
The Fender Eliminator offers a degree of freedom unmatched by other companies.
Blinker, reflector, and all other parts can be removed and reassembled to suit your specs!
However, it is a bit heavy and the screws are not reliable.
View detail
Sporty impression and Rear is Refreshing.
Mounted on z900rs.
The price is higher than others, but I would seriously recommend it.
The texture is different. Since this is an expensive motorcycle, I think it is right to install a suitable product without lowering the value of the motorcycle.
However, I think the design is more along the lines of Sporty than old car style.
One concern was that the variable angle of the Number fixing pedestal might not pass vehicle inspections. There was a concern that the variable angle of the Number fixing pedestal may not pass vehicle inspections. Please check with Dealeretc. for details.
View detail
Aluminum texture is awesome!
The thick aluminum texture has volume. The angle of the Number can be easily adjusted later. View detail
Very handsome short tail bracket
The workmanship is very good, the angle can be adjusted freely, the license plate can be straight up without punching holes, that is, the domestic yellow card is slightly larger but does not affect the use. Because I don't ride a bike in rainy days, and I don't worry about the problem of throwing mud, anyway, it's just handsome enough. Suggestion: It would be better if the parts where the red reflective blocks are installed can be designed to be longer (about 4cm longer) and have a larger adjustable range. -------------------------------------------------- -------- The workmanship is very good, and the angle can be adjusted freely. You can go straight without punching. It is a little bigger in the country in China but does not affect the use. Because you do n 't ride a bike on rainy days, and you are not worried about the problem of dumping mud. Anyway, you are handsome enough. Suggestion: If it can be designed longer (about 4cm longer), it can be designed with the parts of the red blocks. Powered by Google Translator View detail
yzfr7Fender Eliminator
Material:It is Aluminum and lightweight. It is nice to be able to change the angle of the Number because of legal regulations. Screw lock was used for mounting each part, but since there is a possibility that the screws may loosen due to vibration, each part is fixed with strong adhesive. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
good product
It is a very nice product with good texture and adjustable Number angle and Blinker position.
Bullet Terminal processing is required because the product arrives at the Bullet Terminal.
The License Plate Light can be installed without damaging the wiring on the Both Sides of the car if the wiring on the Fender side is cut and modified.
Since there is no +− notation on the attached License Plate Light, we recommend that you work after confirming +− with Inspection Tester.
(I made a mistake after checking with Inspection Tester and connected the wrong way around and skipped Fuse.)
This is not related to the product, but OEM Fenders are tightened very strongly, so it is recommended to prepare a sturdy tool that is easy to apply force to make the work smoother.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
GOOD Design
I think it is GOOD Design.
Regarding installation, note that the OEM parts are used, although it may not be mentioned in the Instruction Manual.
Installation is recommended to prevent the possibility of falling while driving.
View detail
Fits well with Normal tail. Each part is carefully made, no rattling at all.
Even the Blinker's appearance was adjustable, and the appearance of Balance and quality was very high ^_^. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
good
The large hole at the opening of the Wiring hole from the outside was filled with Cemedine Pate.
As for the wiring of Number etc., I cut the wiring of the OEM License Lamp of the Fender side in the middle, processed it to the Bullet terminal terminal, connected it to the Coupler wiring of the Fender side, and connected it to the Coupler wiring of the car Both Sides as it is. I connected it to the CouplerWiring of the car Both Sides.
The PlusPoint is the ability to adjust the Number angle and Blinker overhang width.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
The angle of the License Plate and the overhang width of the Blinker are adjustable.
It is good that the angle of the License Plate and the overhang width of the Blinker can be adjusted.
It's aluminum, so it's very lightweight, but you may need to pay attention to the strength.
Because the Wiring of the License Plate Light has become Coupler, the Fender side CouplerWiring of the OEM License Lamp is cut on the way, and it processes it into the Bullet Type Terminal, and it connects it with LED of SNIPER. Connected with SNIPER's LED. And I connected it to the Coupler of the car Both Sides. (The hassle of this process made it Minus1 for ease of installation)
I also used Cemedine Pate to fill the large openings in the wiring holes.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
The angle of the License Plate and the overhang width of the Blinker are adjustable.
It is good that the angle of the License Plate and the overhang width of the Blinker can be adjusted.
It's aluminum, so it's very lightweight, but you may need to pay attention to the strength.
Because the Wiring of the License Plate Light has become Coupler, the Fender side CouplerWiring of the OEM License Lamp is cut on the way, and it processes it into the Bullet Type Terminal, and it connects it with LED of SNIPER. Connected with SNIPER's LED. And I connected it to the Coupler of the car Both Sides. (The hassle of this process made it Minus1 for ease of installation)
I also used Cemedine Pate to fill the large openings in the wiring holes.
I was so focused on the installation that I didn't take any pictures, so I'll upload them later.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Fender Eliminator Kit
I decided to use SNIPER's Fender Eliminator Kit because the Number angle and Blinker position (width) can be easily changed.
The quality is great and the assembly was easy so it didn't take too long to install.
The wiring for the license lamp needs to be modified because of the bullet terminal, but I didn't want to cut the harness on the car body, so I prepared a connector separately and installed it.
Because the body color is black, the Fender Eliminator Kit stands out for better or worse.
Recommended
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Cool!:Polishing's Aluminum parts are the best.
Material:It is composed of aluminum parts of Polishing and is cool. 800g weight reduction by Fender Eliminator because OEM Fender is thoughtful.
Garbage comes in from there because a hole in the back of this model is left open for wiring. I made a part with resin and sealed it.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
It's so well made that I'd give it a rating of 4 stars.
SNIPER's Fender Eliminator has a very nice texture and allows you to change the angle of the License Plate and the width of the Blinker's overhang. There is no waterproofing of the mouth, so you need to waterproof your mouth by yourself. You can see how to install it and how to make it waterproof in this video on You Tube. (Thrillman) Than View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
ZX-25RSNIPERFender less kid
Texture
The cleanliness of this cut-out is very nice.
It's beautiful.
It can be installed nicely without any modification.
I would especially recommend it.
The number angle can be adjusted widely.
The width of the Blinker is wide enough to adjust.
Of course, Reflector and License Plate Light are kid-ized from the beginning, not Option.
(I've seen other companies' products with this option, so I've made a point of mentioning it.
Mounting
If you have installed a Fender less in the past, you should have no problem.
If you're new to the installation, I think it's better to leave it to the shop to put the Wiring together nicely.
Notes on this product
It has more Bolt points than other companies' Fender less. The reason for this is because we are able to make the adjustments that I wrote in the recommendation.
For that reason, I think it's best to periodically tighten the Bolts.
so-called "Backwards peta. You can't adjust to the angle of the It's illegal to begin with, the back petal is illegal.
The Number angle can be adjusted to quite an excruciating angle, but don't use it in a bad way.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
It wouldn't be difficult if I knew some electrical stuff...
SNIPER products Lever, B/S, and Fender Eliminator are now three items with a unified SNIPER product line.
There was no detailed Installation Manual available for either product.
This product allows you to adjust the angle of the License Plate, the position of the License Plate Light, and in the case of the OEMBlinker, the width of the License Plate, which is ultimately tricky.
In addition, because License Plate Light is not compatible with OEM Coupler, it must be converted to Bullet Terminal etc., it is difficult to understand the Plus minus of the vehicle body without Inspection Tester.
(At the very least, I'd like to see an explanation of which is the Black White Plus of the Wiring of the License Plate Light on the Fender Eliminator side.
I installed a KIJIMA Nano Blinker to match my Fender Eliminator.
Although it is also in the general comment, since there is no lid etc. on the part which pulls Wiring into the body of the car, a hole of 2cm square will be left, so I processed and attached a 2mm thick rubber sheet.
The angle of the License Plate can be adjusted so that it is backwards. It's also possible, but it would be illegal, so it's best to be careful.
View detail