Reviews
Ligh Tech tail tidy
The quality of the components are excellent. Fit is also great, when you figure out how to do it! Zero instructions and resorted to YouTube tutorial from a different manufacturer. The hardest part was actually dismounting the OEM number plate holder. You need to cut the number plate light wire and reroute it. After that it was straight forward. View detail
Fits: KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650
Nice chrome parts
It had a shorter tail than the original and a Lukatsu tail brake light, so it had a sense of unity, and it was nice to have all the additional parts to attach a license plate. View detail
Genuine Pyramid Plastics Enduro Fender for 2020 MT07
A customer wanted to get an extender for their MT07 to help stop water flick from the front wheel. Having not used one of these before on any bike, I asked the customer what they preferred. They chose this one from Pyramid Plastic. Good choice from doing my own research. The fender extender was not hard to find once you put your bike details in the website and the options appear. The extender was not overly expensive and added to a few other small parts in my order, I had them all shipped via EMS. I do have more than one item per order as this does cut back on the shipping cost somewhat. The order arrived in 5 days from being shipped and was well packaged and in 100% perfect condition. The fender extender came in the Pyramid Plastic sealed packet and was wrapped in bubble wrap from Webike warehouse to keep it safe. You do have the option of using the stick pads for this fitment or better yet, just drill the fender and attach for a more secure fit. This was the route we went. The extender is made of and ABS plastic as far as I can tell and the fitment of this is absolutely spot on. The quality of the part is excellent. A nice matte finsih which does go very well with the bike anyway too. I did think there may be a slight gap once test fitting but there was no gap at all. Took a little over an hour to do the job right but the result is really good. View detail
Easy dress-up
[How is it used?
I wanted to change the look of the SUPER CUB110 (JA59) a bit, and also to have an anti-agitation effect.
Was the one you received as per Image?
Nothing of particular concern.
Was the installation difficult?
You will need a #3 Driver and a 10mm Wrench, nothing too difficult as you just need to remove the License Plate and install them together.
How was your experience with it?
It looks a bit Wilde. I'm not sure how effective it is in preventing agitation (partly because I didn't get something so blatant to begin with). Well, it makes it look more like an Off-road Motorcycle, which is better than nothing.
[Included Parts:were they on?
Nothing in particular, just Body.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Since the material is Rubber, I don't think I need to worry about it, but I thought it might hit the Fender that comes with the Motorcycle from the beginning, so I put Urethane Seat on it (2nd photo).
View detail
Price suitable
The screw holes were accurate and there are no problems with installation or appearance. View detail
Easy to install, but ???.
Installation is easy, and the design fits well with the car body without any discomfort. However, I think that the reflector should be included from the beginning since ACTIVE also manufactures a reflector. View detail
YOSHIMURA Fender Eliminator Kit
Item arrived..super fast shipping.3 days arrived.check and all item is in order.never been disappointing.highly recommend.thank you team webike.awsome job.5 ⭐ View detail
SM LINEFender MD44 installed
As per the impressions of our predecessors, the MD38/44 can be installed without any body modification.
Reasonable price and VisualUp, no complaints!
However, in my case, I have prepared the following additional components
Spacer:6.2mm ID x 15mm OD x 6mm L (qty:4)
Bolt:M6 x 30 (qty:2)
Flat Washer:M6 x 22 (qty:4)
When MD38/44 is installed, the spacer thickness should be at least 6mm to avoid interference with the car body. The outer shape may be a little larger than 15mm.
It is fastened with 4 OEMBolt, but for some reason, Quantity:I also bought Bolt because each 2pc is a different length (my used one) and when I put Space on, the shorter one doesn't reach.
When tightening from the tire side, the bolt groove on the FenderBody is large, so the washer is also large. 22mm larger than the bolt groove will cause the washer to ride up.
For your information.
View detail
After much waiting, it finally arrived!
Cool! I'm glad I put it on! ♪ (??????) ♪ View detail
Satisfied with Design
I was looking for replacement parts for OEM parts that had deteriorated over time, so I'm glad I found them.
I was concerned about the installation method, which is not shown in the picture, but Instruction Manual is included and it is easy to install. 。
Since the Tire size was increased this time, the Bracket was set to "Quantity" in the Home center.:2pc. Set(Quantity):Pair (for Left and Right) The installation position was corrected by purchasing an additional (1).
The material quality of the product and the processing of the White Gel Coat were satisfactory.
View detail
I'm satisfied
PMC-made z2TypeTailBracket Kit (sold separately)
Purchase includes installation of z2Tail
Blinker mounting position is also better than OEM.
It can be installed in the front, giving it the feel of an old car.
Enjoying OEM for a while
I was thinking of changing to z2Tail if I wanted to change my mind.
I think
View detail
Installed on SEROW250.
It was possible to install if only the protruding part connecting the OEM Fender and Headlight could be avoided (I used a nipper to cut it off). (^_^;) (e.g. "I'll be back")
FenderRear also manages not to contact the vehicle body
Compared to the OEM, it is shorter and less susceptible to wind, and I feel that it has reduced dizzying when running.
Design was also MATCH with the car body and got tired of OEMSpec.
This is a Recommendation for those who have come to the site.
View detail
As a light Fender
Purchased as a lightweight for Fender.
There is a different MODEL of the same ACERBIS, but this one separates the front and back Fenders.
I also bought it with the expectation that it would have a cooling effect since it can send VANVAN running air to the Radiator as it is, since it is shaped to have a hole in the middle when used only with the front Fender.
As a result, handling is lighter and we have no complaints about cooling.
In addition, since a back fender would have to be attached to the car if it is to be driven on dirt roads, please consider this as a proposal for use by Maine city drivers or those who can drive only on paved roads.
View detail
I put it on because I made a Fender Eliminator.
I customized it at the same time as the Fender Eliminator, so I don't know how much mud it splashed before the change, but it was probably better than the NORMAL. The back and the License Plate were just about sloppy on wet surfaces, but I don't think it splashed on my back. The RearSeat has some spots of mud on it. View detail
Wheel replacement is ….
Chain cannot be bent when removing and replacing the wheel.
Suggestions for improvement.
View detail
Well, that's okay.
When using the OEMBlinker, a dedicated Bracket is required, and the additional cost is..,
The Exclusive Bracket is also somewhat unstable in its mounting position.
Well, I guess it is worth the price.
View detail
It is a good item
I think it is a very good product, simple and easy to install.
It looks better
View detail
I think it's good that it's cosmetic.
The installation can be done by looking at the Instruction Manual, but the Blinker connection seems to be the other way around. I am glad I read your impressions. I bought some rubber string and waterproof tape at Home center to fill in the gaps. I wish I had done a little more research to see what other manufacturers were doing, but considering the cost, it was a no-brainer. I still get muddy on wet surfaces and in the rain. View detail
It's a great product.
It's a great product.
It is very easy to assemble, and it is sturdy enough that there is no risk of it falling off and being lost while driving.
The design is much better than other products, so it goes very naturally with existing car body parts.
I was worried after ordering, but I am very satisfied. ----------------------------------------- ----------------- It's a great product. It is very easy to assemble, and it is sturdy enough that there is no fear of it falling off and being lost while driving. The design is much better than other products, so it goes very naturally with existing car body parts. I was worried after ordering, but I am very satisfied. Powered by Google Translator
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
I'm not that happy for the price.
It's one of the parts for mounting the long tail. I think it can also be used for the genuine tail. It feels a little lighter compared to the genuine tail. View detail