Reviews
Vstrom under cowl
The product is packed well and shipped on time. There are no damage. The item is original and it is plug and play on my sv650 for added protection. Complete accessories View detail
Fits: SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650XT
Very good OEM parts, but...
good point
Can be attached to any machine equipped with a P511 Engine.
I installed it on my current model SV650.
Although it is called "Under Cowl", there is almost no cowl part at the bottom, so it does not interfere with oil changes and other operations.
After assembly, the unit can be detached simply by removing the four Bolts on the SIDE, without compromising serviceability.
The design of the V-Engine is very good, but it has a look that compensates for the scuffiness of the underbody, which is common in V-Engines.
Cheaper than a bad Under Cowl*, less than 23,000 yen at the time of my purchase.
All of the installation brackets and instruction manuals are in quantity.:It is available in Set, and there is no need to worry when installing it.
OEM products are made with fitting in mind, so you don't have to worry about fitting.
A bad point
The product is originally designed for DL1000 V-STROM650, so it has the DL1000 V-STROM Logo on it.
I'm thinking of making a Sticker and posting it above.
From a distance or in a photo, it looks good, but at close range, there is a surprisingly large gap in the cowl, which makes it look scanty.
Even if it is a Cowl, some stores may charge a Cowl-equipped car labor fee for the work.
Instruction Manual is in English Version for some reason. (Well, if you know anything about maintenance or DIY, you don't need to read the English version to understand the contents...)
Some Bolts need to be removed with T30 when installing, so preparation of Socket, etc. is necessary.
I wrote that there is no cowl at the bottom in a good point, but it is not suitable for Circuit Running because there is no cowl at the bottom.
*Under Cowl in Circuit would have had an Oil-receiving role, but in this Cowl...
I have written a fair amount about the bad points,
Personally, I give this product almost a perfect score.
If I had to say, I would have said Cowl without Logo...
View detail
Fits: SUZUKI Address 110, SUZUKI ADDRESS110, SUZUKI ADDRESS110, SUZUKI Address 110, SUZUKI Address 110
Replace Handlebar Cover
I had been using a Handlebar Cover, but the poor operability, including the switches, was a drawback. On the way back to work, it is nighttime and there is a mountain pass on the way, so it is necessary to switch the light switch between high and low. This product is OEM and fits well.
The conclusion is that the cold protection is there. The more Speed is on it, the better it works. It looks big. I am worried about the rigidity of the Mirror, because it is attached only at the base of the Mirror.
View detail
Good for dress-up purposes.
I installed it myself on a GSX-8S.
Two locations are co-tightened with Meter Bolt.
One of the holes needs to be drilled in the cover underneath, but I didn't want to drill a hole, so I used double-sided tape.
I drive on highways and other roads and have no problem fixing it.
View detail
Suzuki leg inner rack
Perfect quality and super easy to install
I strongly reccomend it!
View detail
Fits: SUZUKI Address 110, SUZUKI ADDRESS110, SUZUKI ADDRESS110, SUZUKI Address 110, SUZUKI Address 110
The wind protection is pretty good, so it's cool and I recommend it.
I bought the Address110 in a hurry because my commuter SPECIAL Knife's Axis Treat blew the Engine, and the Shop presented me with this one as an extra. This is good. View detail
ManufacturerWhile supplies last!
I bought this because I will be using LETS4 for commuting and I still wanted storage.
These things disappear as the car bodies are discontinued, so if you want one, get it while it's still in stock.
To install, just drill 6.5" holes in the bottom of Inner Rack and LegInner Shield of Scooter, and tighten with screw.
If you have been playing with motorcycle, it is easy, but if you have never played with motorcycle by yourself, it is better to ask at motorcycle shop.
It is large enough to hold a plastic bottle, and does not affect the position of your feet, making it convenient for long distance travel.
On the other hand, it may not be necessary for people who only need to travel 10 minutes to the station or office.
View detail
Fits: SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgmanType S Basic, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE SS
Suzuki Side Visor Order
Can you tell me if my order is still on the way, order 11/29/2020. Tracking shows that it still has not arrived in the United States. Thank you View detail
Fits: SUZUKI Address 110, SUZUKI ADDRESS110, SUZUKI ADDRESS110, SUZUKI Address 110, SUZUKI Address 110
It is larger than I expected.
It's not as large as I thought it would be. However, because of its large size, it is very effective in preventing the wind from hitting your hands directly. View detail
Fits: SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgmanType S Basic, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE SS
A useful and decorative item
Readers; I own a Burgman{USA name} 400 and wished to add some 'style' and protection for my feet and legs. Thus I bought this set. It came in very good time.It was well packaged and even had some English instructions that made sense to an English speaker/reader! Cautions first; these things LOOK like they can go on in several ways; only one is correct, so take your time and figure it out, before you make a mistake. Be sure to clean the body surface so the contact glue will hold. Measure where the brackets go, and you will 'know' from the 'feel' of it, if you are right, they really thought this one out correctly. Now the real caution; the fasteners are the common push pin/expand the center sort of fasteners. They work very well , IF you are very careful and do it PERFECT the first time. That I did not do. Here in the USA you can not go 'down to the Scooter shop on the corner of Chow and Main" and buy '40 of them for $02.00 USD' to fix your mistake. I have the Side Visors secured, and went thru the 'computer maze' of the contact page, to see if I can get more of them. They are not reusable. As to the cosmetics and such; they look very stylish on the machine. They do block much of the wind buffeting you have on your legs and feet. And better, the do not get in the way of your feet when you get on or off. SO they are a good value to the money spent, and I very much like them. View detail
70
LETS4 itself does not have much space to store It will be more convenient to install an external rear box or LegInner Plastic bottle, perfect for storing long items If it rains, it will probably collect rainwater It's a good solution to this problem
The use is very good I'm glad I bought it
You need a lot of tools, and it is better to use a drill with a center It is "Woodworking Drills I am a Steel Drill without a Center No Center So I couldn't get the center and drilled a hole in a strange place I also tried center punching, but the Center is still not in the drill itself It's better to have It's a Screw with a hexagonal head Moreover, because it is a small place, Hexagonal Wrench "Bar Type It's better to have it so you can close it properly
View detail
SUZUKI Under Cowling DL1000
Suzuki's accessories are too few parts of the aluminum alloy shield. Perhaps it has only an aesthetic effect. If the DL1000 is not equipped with this shield, the appearance is too unattractive. View detail
Fits: SUZUKI Let's 5G, SUZUKI Let's 5, SUZUKI Let's 4 Basket
OK for ADDRESS 110
I was worried about attaching to ADDRESS 110, but Left slightly interfered, but there was no problem. I ran and ran, but I did not feel the wind. It was good. View detail
Fits: SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgmanType S Basic, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE SS
Windproof effect
Running on a highway certainly had windbreak effects. Standard Equipment to Long Screen
Knuckle visor, adding Side visor to this, windbreak effect is outstanding. Footstep also fit Visor
If it puts it thinks that it has an effect also in cold wind of winter. Just keep warm in the winter so it's cold.
View detail
Fits: SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgmanType S Basic, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE SS
Easy installation
I do not know well because it is not cold seasonally yet. I feel like I'm windproof with feeling I ran.
Installation was very easy. First measure the dimensions to be contained after degreasing well, measure with the pencil, peel off the Double-sided Tape and paste it and stop at the attached Parts.
I'd like to expect that it will be a cold season and help wind protection.
View detail
Inner Rack attachment to LETS 4
Since there is no Inner Rack in LETS 4, it is something useful if attached. Plastic bottle entered.
Installation is relatively easy. (About 30 minutes)
You can do it with electric Drill, Driver, 10 mm Spanner.
View detail
Fits: SUZUKI Address 110, SUZUKI ADDRESS110, SUZUKI ADDRESS110, SUZUKI Address 110, SUZUKI Address 110
Outstanding Knuckle guard
【What made you decide the purchase?】 Design was cool and I bought it as Dress-up.
【How was it actually used?】 In fact, the wind that hits the hands and arms disappears when running, and the wind to the vicinity of the shoulder can be suppressed somewhat. I thought that it was a Dress-up parts, but it was a practical Parts. I think that the effect in the cold winter is absolutely Large.
【Was it difficult to install? (Hard parts case)】 Installation is easy to understand because the Instruction Manual is also easy to install.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Be sure to attach Bracket and then install Screen.
[Is there anything I was disappointed about?] Not.
【Hope for Manufacturer - Please tell me if there are any improvement points】 I am happy that Screws etc. can order by ordering the part ProductNo.
【Have you compared items?】 There is none
View detail
Fits: SUZUKI Address 110, SUZUKI ADDRESS110, SUZUKI ADDRESS110, SUZUKI Address 110, SUZUKI Address 110
Flowstone OEM ProductJust fit
Actually, another ShoppingSite, I ordered af Asahi Shinko made Meter visor. I installed them at the same time because both were completed. Shape of Instruction Manual - How to write - Feeling of the part It is feeling that it is made at the same place. The length of the Adapter attached to the Left Side mounting part is 38 mm Meter for Knuckle visor, but the article included in Meter visor was 42 mm.
Well 4 m Meter difference, so I used a Meter visor's thing. Washer is adhered to the Adapter, but since we sandwich two Brackets, we removed the Washer and worn it. Just remove Back Mirror, install AdapterBracket, return Mirror, just install and adjust Knuckle visor, so there is no difficulty in the work itself or time consuming.
Both Meter visor and Knuckle visor are Smoke, and the appearance is also good. The impression that I tried suddenly became cold, so the wind could be avoided, but in MeshGlove my hands are cold.
In mid-winter, the combination of Grip heater is recommended.
View detail
The fitting feeling is great but it is high ....
There is only OEM Product and the fitted feeling is the best.
Or, I want you to attach it from the beginning.
Simple Material : I think that it is expensive for Plastic items.
There is nothing dissatisfied as a thing.
View detail
Fits: SUZUKI Address V50 (4-stroke), SUZUKI Address V50 (4-stroke)
Considerably, if this product is attached, it will have a sense of togetherness and a high grade feeling will come out of it. Since also making is solid, I use my being pleased. since attachment is not so difficult a thing, either --
Considerably, if this product is attached, it will have a sense of togetherness and a high grade feeling will come out of it.
Since also making
is solid, I use my being pleased.
since
attachment is not so difficult a thing, either -- an amateur's person -- about 30 minutes -- attach and complete.
Since change of appearance can be performed rapidly, it is good!
View detail