Reviews
Fits: HONDA FUSION [Fusion]., HONDA FUSION SE, HONDA FUSION X, HONDA FUSION [Fusion] XX, HONDA FUSION [Fusion]., HONDA FUSION SE, HONDA FUSION X, HONDA FUSION [Fusion] XX
most parts dont fit
The undercowl fenders do not fit without any custom fabrication, i had to use a dremel to make some parts fit. And one fender peice came with broken plastic. Would NOT recommend. View detail
Garbage too much grass.
The body is wrapped with PetitPetit, and the cushion is laid firmly, but when you open it, you see the wound.
Is this the fault of the carrier or the manufacturer…?
I was so dismayed by the workmanship that I wondered if I would be embarrassed as a PRO if I had been in this situation at the manufacturing company stage.
There is no Instruction Manual and I don't know how to attach it.
Also, although I can understand a slight error in handmade, the hole position is gapped 15mm from the center, and I am not sure if it can fit in there or not.
Garbage or Garbage? Are your eyes knothole? Are you ashamed of yourselves as PROs? It's a bit like a scam!
View detail
Delayed delivery time and time again.
It has been almost 2 years since I ordered. How many times have we had delays in delivery?
If I had been told from the beginning that the delivery time would be two years, I would not have asked for it.
If they say it will be delayed a month or two, then we wait a little longer. This is a repetitive process that has continued until now.
Once again, I would like to know the delivery date = the date when we can be sure of the supply.
View detail
Don't touch it out of curiosity.
Mounted on NINJA2 Helmet 50RR.
The wall thickness is considerably thinner than that of the OEM, but the stiffness and strength are not hampered by this.
However, I would recommend that only those who are capable of machining Carbon should purchase this product, as there is a hell of heavy machining waiting for some products.
I mean, it's so much more difficult to process than FRP that I can say to anyone, I don't recommend it.
View detail
Poor quality
Shape Design is fine. Paint is rough and muddy, FRP is 5 times rougher than I expected. I would rather buy a more expensive one. I want to return it. I'm not complaining about the color or anything, I just wish they would have at least made the paint smooth. I am sorry. View detail
Service manual required if you want to install it yourself….
I am a beginner of Custom, but when I bought it to install it by myself, I found that the contents of the Instruction Manual is almost the same as the Service Manual, and I think the level of difficulty is high. By the way, the manual costs about 15,000 yen.
I wish you'd say it first, Hon.
View detail
Material:What is the quality of FRP products?
I purchased the Under Cowl Tray for my ZX-10R and it arrived today!
When I opened the item, I saw a long scratch ・・・・・ and the uncolored part looked like a scratch.
Even assuming painting, I think it will inevitably look different in areas where light passes through and where it doesn't, but Material:What is the quality of FRP products like?
I'm a little disappointed.
View detail
It has been 2 years since I ordered it….
It has been two years since I ordered it and I still have not received it.
I am already dismayed.
I can't tell you how many times I have had delivery delays.
I know they don't care about meeting deadlines.
I thought MotorcycleBody wouldn't wait this long.
If you are planning to purchase Parts from this Manufacturer
I think you should think very carefully before ordering.
You may have a bad experience.
View detail
the worst
I wanted the basic aluminum color, so I bought it because I thought it was an unpainted product. However, the quality of the product is too bad. It's like a defective product, but the manufacturer says there's no problem. I just use it because it's a hassle to return it. Please consider the purchase of unpainted products by referring to the photo View detail
It can be installed without any trouble.
Texture and accuracy are not as good as they are cheap.
I can install it for the time being, but I would have preferred to keep the OEM version instead of changing it.
View detail
Left Side indentation.
There is a dent on the Left Side and when I requested a replacement, I was told that the dent was for Light adjustment since the mold was taken from an OEMCowl.
Light cannot be adjusted with a recess! Light adjustment is not done with a recess, but with a hole through which the Driver is inserted. I would like to see a clean hole or a flattened hole.
Clear on Carbon is also wavy and drooping!
Please deliver a better product since we are paying a high Gold amount for this product.
View detail
It is a very messy and awful product.
This is a very crudely made product. The surface treatment seems to be Gel Coat Spec. but it was applied by brush, and there are parts where the Gel Coat is unevenly applied and not applied. I am not sure if the Pillion Bar and Tail cowlBody mounting screw holes will fit. It will probably need to be reworked. View detail
The product is a good one, but ….
The two POLISPORT attached StickerLarge cards were not included. Did they get pulled out?
The delivery time is also the worst.
View detail
Paint was peeling.
I bought MORIWAKI parts because I didn't want to buy inexpensive CHINA parts and have the paint on the bracket peeled off, but there was a 15mm paint peel on the left side of the bracket. It is huge. It was not invisible when I inspected the product. I lost a lot of money. View detail
Accuracy is quite poor.
Fitting is good on one side, but the other side is the worst fitted, and no matter how much double-sided tape is used to reinforce it, the surface is not in contact with the car body side, so it peels right off.
The carbon is not flexible enough to be used as a sticking point, and it fell twice while running.
The delivery time was quite long and the delivery schedule was postponed twice, so I can only say that I am disappointed.
View detail
I've been waiting a year. I don't need it anymore.
One year too long. I don't need it anymore.
Return Gold.
View detail
Compatible car models:Although it says "ALL MODEL", it is not compatible with JA60.
Applicable model:CROSSCUB110, although I ordered it because it was marked as ALL MODEL. (JA60) The space under the Meter is too narrow to fit. View detail
Quality not commensurate with price
To be honest, I can't say that the QUALITY is commensurate with the price.
The Screw holes do not match and the Bolt that comes with it is obviously too short.
The screw holes were not aligned, so I installed it forcibly, and the Crack was easily inserted.
Well, it is a handmade product, so accuracy may not be a problem, but I thought I would never buy A-TECH's parts again.
View detail
Difference from OEM Color
I purchased this for my SE, but the yellow color is different from the OEM color, which is a darker yellow. View detail
_TS.jpg)
Purchased Black Gel but has deep scratches.
Buy Black Gel
I understand that Black Gel is a prerequisite for painting, and I can understand abrasions, small scratches, etc., but I'm not sure.
There were deep scratches on the Pate fill Level.
I thought it was defective and inquired about it.
They told me that the manufacturing mold was damaged and that I would receive the same one even if I exchanged it.
It seems to be a good product.
If you are good at Cowl processing and can handle Level Cowl from Pate embedding, it is good because it is less expensive than other products.
View detail