Reviews
Fits: KTM XC-F 250, KTM SX-F 450, KTM SX-F 250, KTM SX-F 350, KTM SX 150, KTM SX 125, KTM XC-F 350, KTM XC-F 450
To replace Exterior Set
If the exterior cracks, it can cause unexpected injuries in the event of a fall, etc., so we replace them on a regular basis.
I like it because the quality is the same level as OEM parts, but it is much cheaper than OEM parts.
View detail
Poly sports exterior
The hole to insert the washer is generally small. I went to Smooth for installation. View detail
The quality is still different.
I have previously purchased a cheaper CHINA Exterior Kit. The quality and texture has improved a lot recently, but there are still some problems with the mold or the finish, such as bali, sagging, and deformed holes.
Poly sports' Exterior Kit has none of these problems. The exterior kit is beautifully finished in all areas and can be installed without any worries at all.
I am not too concerned about weather resistance for Motocrosser use, but what about TRAIL?
The Decal Kit will be applied immediately after installation, but it looks fine in terms of texture.
It is not surprising since the company also undertakes OEM for Manufacturer, but from User's point of view, the price is low and it is very helpful.
The fitment is listed as CRF450RX, but CRF250RX is also common, so it is used as is.
View detail
Fits: BETA RR 4T 480, BETA RR 4T 430, BETA RR 4T 350, BETA RR 4T 390, BETA RR 2T 300, BETA RR 2T 125, BETA RR 2T 200, BETA RR 2T 250
Exterior is expendable.
I purchased this product to replace a skinny exterior that was used on Race. Since it is a vehicle specific product, the installation went smoothly and the fit was perfect.
Since the exterior is Plain, it is recommended to purchase Decal and paste it.
Depending on the strength of the Decal to be purchased, the exterior itself may be strengthened.
It is better to wash the exterior with Sponge detergent before attaching Decal. (If it's new, it will be oily.)
I've bought it 4 or 5 times now and it's a great product.
View detail
The product is a good one, but ….
The two POLISPORT attached StickerLarge cards were not included. Did they get pulled out?
The delivery time is also the worst.
View detail
Fits: HONDA CRF 450R, HONDA CRF 250R
It was a great deal.
I was looking for a color change, and I found an exact product and bought it immediately.
The Fork Guard was also included and was a really good value for the money.
View detail
Exterior Kit
I am disappointed with the price increase. I used to be able to buy it for $2,000. (T_T) View detail
Quality is good
Used in 2016 YZ250F.
New new for 2023.
This is my second purchase.
This time it was on Sale for 12970 yen.
It is attractive to be able to get them at this price compared to OEMs.
However, the delivery time took about two months due to the current situation.
If Fork Guard Plastic is also included, full marks.
EachPart is individually packaged.
I stuck Decal on it as soon as it arrived... ♪
View detail
Fits: YAMAHA YZ450F, YAMAHA YZ250F
Cheap and reliable
I purchased this as a practice exterior.
It is a good product with excellent cost performance.
OEM at the same price, Quantity:Pair (for Left and Right) You can only buy about Number Seal Cowl.
View detail
For MY2023YZ125X
I purchased this for my new MY2023YZ125X.
Considering the reSaleValue, the new exterior was immediately replaced with this exterior.
Installation was completed in a straightforward manner with no modifications.
I thought Polisport had a slightly larger margin of error than ACERBIS, but it is no longer comparable.
The price is also lower, so if you are not picky, this one should be sufficient.
View detail
Rear Fender requires Cut
Rear Fender needs longer Cut than OEM.
Cut with Nipperetc., prepare the cut section with Belt Thunderetc., and melt the white discoloration with Heat Gun or Burner to restore the color.
The parts to be cut are made in an easy-to-understand manner, so there is no problem, but some people may find it quite time-consuming.
View detail
Fits: KTM 150EXC, KTM 250EXC, KTM 300EXC, KTM 250EXC-F, KTM 350EXC-F, KTM 450EXC-F, KTM 500EXC-F
Full Cowl
The product was more precise than expected, but I gave it 4 stars because there were some BALI and small wounds, and air could easily enter the product when the decal was attached. Other than that, I thought the level of precision of installation was high for an Other Brand Product. The price is quite cheap, and I think this gold price is the lowest price for a full kit. View detail
Fits: GASGAS EC350F, GASGAS EC250F, GASGAS EC300, GASGAS EC250
Sticks as well as OEMs.
Shape and mounting hole position are the same as OEM.
Durability is a little harder resin than OEM, so it is easy to crack.
View detail
ได้ของตรงตามที่สั่ง รอของไม่นาน View detail
Fits: BETA RR 250, BETA RR 300, BETA RR 350, BETA RR 400, BETA RR 450
Cheap and reviving
The fitting is good and for the price it is a good product, although some parts are a bit crudely made.
Decal Kit can also be applied normally and has the effect of improving the appearance.
View detail
BETA RR2T
Purchased because the exterior of my BETARR2T was scratched up.
Rear area is the same shape as 13~, and SIDE, shroud, and front area are the same shape after 20 years.
View detail
Fits: HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA TE150, HUSQVARNA TE250, HUSQVARNA TE300, HUSQVARNA TX125
Exterior Set Replacement
I always play with Enduro and Hill climb in the forest road touring and course.
Especially on hill climbs, you'll be turning your motorcycle over and dragging it around, which can quickly hurt your bike. Especially the exterior.
It's been about a year since I started riding, and the shroud is cracked and the side cover is damaged, so I replaced it.
I was able to install the Bolt On securely.
This kind of Kit is called Quantity:It was sold in Set, and I changed it cheaply, so it was very helpful.
View detail
ได้ของครบทุกชิ้นครับแถมราคาถูกอีก View detail
Fits: GASGAS MC450F, GASGAS MC250F, GASGAS MC125
erroneous product
This is the part number for the Exterior Kit for the Gasgas MC, but only the Rear Fender arrived for the EC.
If it's for MC, there should be no protrusion for tail lamp installation, but the one I received is the shape for EC with protrusion for tail lamp installation.
The air cleaner box for EC has a hole for penetrating, and the hole must be blocked to use it without the tail lamp.
I can't return it because I stuck Decal on it right after arrival. I'm reviewing it to alert other buyers.
View detail
Fits: YAMAHA YZ 250F, YAMAHA YZ 450F
Inexpensive and very good.
I have no problems with the quality, and the price is very reasonable for a new graphic.
You can't go wrong searching by product number, though.
Sometimes the product images are of old and new vehicles or slightly different, which makes me slightly nervous.
Front Fork Guard is not included in the package, so if you need it, you need to prepare it separately.
View detail