Reviews
Chic Design Road Comet Fairing
The Road Comet fairing was perfect in every way, it was easy to fit and looks awesome. The 2 tone paint was absolutely spot on. Communication with WeBike was also very good. View detail
I'm glad I waited.
I really like the slightly rounded design.
The paint is beautiful. The installation went without a hitch,
As you wrote, I am changing Handlebar as well.
As a final step, we modified the Reserver tank bracket. The bracket that came with the tank could not be installed, so we had to bend it backward about 30 degrees from the center of the NORMAL bracket to get a good fit without interfering with any part of the tank. (Photo)
Satisfied with the overall solid fix!
View detail
inferior goods
I ordered it because I liked the design, but when I opened the package, I was surprised to find that the surface was uneven like a used product. It's impossible to pay high gold to remake it ?? View detail
Tightened.
This one comes more firmly than the OEM Silver.
Quantity at the price at the time of purchase:Pair (for Left and Right) It was a little over 6,000 yen.
Seat and side covers must be removed for installation.
View detail
Fits: HONDA CB400SF VTEC, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR REVO, HONDA CB400SF VTEC REVO
If only it were a little deeper.
The bottom is open so you can change the Oil as it is, but if it were a little deeper in terms of design, I would give it 5 stars. View detail
Fits: BMW R nineT scrambler, BMW R nineT Pure, BMW R nineT Roadster, BMW R nineT Urban GS, BMW R nineT Urban GS
UrbanGSParis-Dakarization
The quality of the kit from UNIT garage is good, not to say Japan, and the paint and decal on the tank are also good. The finished product is a very good parenthesis and it became a different motor cycle. View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Meter visor even cooler than expected??
I purchased the ENDURANCE Meter visorLong set + installation kit for CT125.
I was a little excited when I unpacked the package because I had been planning to install this product for a long time....... The installation was easy and took only about 30 minutes without any stress, and it did not interfere with any surrounding parts.
Visor, which looked so small at first sight, now its presence is upgrading HUNTER to Wilde and I am very satisfied with it. ?? I am sorry for doubting.
Tightening is still the way to go. [Color] Smoke.
Thank you for a really good product.
View detail
It became a little Fashion.
The purpose of the parts is to make the Indicator Lamp easier to see. Of course it has that effect, but I think there is a little change in aerodynamics.
I feel strong wind pressure when I reach about 100 km/h at high speed. After installing this Visor, I felt it was reduced a little.
I recommend it to anyone who wants to do a little something better.
View detail
Exactly
No processing and It is easy to install...BALIetc. was not at all. View detail
sv650Meter Visor Screen
I installed it on my sv650. Windproof effect is so-so. I wish it was longer and wider. Looks good and I like it. View detail
Fits: KAWASAKI KH250, KAWASAKI KH400, KAWASAKI KH250, KAWASAKI KH400
Side cover grommet
Side cover It fit beautifully. View detail
A-tech single seat cowl&seat
Received my single seat cowl and seat today and I'm very impressed with the quality of the items,I've offered the cowl up the the bike and the paint is a good match, the only reason it's not getting 5 stars is the time between buying and receiving the item. View detail
I'm not that happy for the price.
It's a little bit longer. There's a dress effect where the body looks a little bigger, but there's no significant change in appearance. I'm not that happy for the price. View detail
High speed Wind protection
For high speed wind protection, not too large and good texture for OEM. View detail
Wind protection for now
It is inconspicuous and has a good OEM texture, so I put it on for now to protect against wind at high speeds. View detail
Vstrom under cowl
The product is packed well and shipped on time. There are no damage. The item is original and it is plug and play on my sv650 for added protection. Complete accessories View detail
It arrived a month early... but maybe I had high expectations...
Of all the Magical Racing products, this was the most expensive one I bought and had the highest expectations...
I really liked the room side tape inside and lots of cushioning products.
However, when assembling, the bolt holes did not line up, so I had to do some machining.
I'm so scared of taking the under cowl off again.
It may not fit as well as the original cowl, but
A few of the bolt holes were misaligned, so there was a situation where the carbon broke into small pieces during processing, but it was still too far to replace it, so I just used it.
It's not as good as a homemade cowl, but it's a product that requires some processing ㅠㅠ ------------------------------------- --------------------- Of all the Magical Racing products, it was the most expensive and had the highest expectations... I really liked the room side tape inside and Lots of cushioning products. However, when assembling, the bolt holes did not line up, so I had to do some machining. I'm so scared of taking the under cowl off again. It may not fit as well as the original cowl, but A few of the bolt holes were misaligned, so there was a situation where the carbon broke into small pieces during processing, but it was still too far to replace it, so I just used it. It's not as good as a homemade cowl, but it's a product that requires some processing. Powered by Google Translator
View detail
Fits: SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650XT
Very good OEM parts, but...
good point
Can be attached to any machine equipped with a P511 Engine.
I installed it on my current model SV650.
Although it is called "Under Cowl", there is almost no cowl part at the bottom, so it does not interfere with oil changes and other operations.
After assembly, the unit can be detached simply by removing the four Bolts on the SIDE, without compromising serviceability.
The design of the V-Engine is very good, but it has a look that compensates for the scuffiness of the underbody, which is common in V-Engines.
Cheaper than a bad Under Cowl*, less than 23,000 yen at the time of my purchase.
All of the installation brackets and instruction manuals are in quantity.:It is available in Set, and there is no need to worry when installing it.
OEM products are made with fitting in mind, so you don't have to worry about fitting.
A bad point
The product is originally designed for DL1000 V-STROM650, so it has the DL1000 V-STROM Logo on it.
I'm thinking of making a Sticker and posting it above.
From a distance or in a photo, it looks good, but at close range, there is a surprisingly large gap in the cowl, which makes it look scanty.
Even if it is a Cowl, some stores may charge a Cowl-equipped car labor fee for the work.
Instruction Manual is in English Version for some reason. (Well, if you know anything about maintenance or DIY, you don't need to read the English version to understand the contents...)
Some Bolts need to be removed with T30 when installing, so preparation of Socket, etc. is necessary.
I wrote that there is no cowl at the bottom in a good point, but it is not suitable for Circuit Running because there is no cowl at the bottom.
*Under Cowl in Circuit would have had an Oil-receiving role, but in this Cowl...
I have written a fair amount about the bad points,
Personally, I give this product almost a perfect score.
If I had to say, I would have said Cowl without Logo...
View detail
Cowl mounting holes do not fit
Paint quality is good. It makes it look like a new car! I had to force it on with Tie Wrap or re-drill the holes … I think it may have been an individual mistake, but … I drilled the holes with a Drill and installed it. If you can install it, you will be supremely satisfied. View detail
Poof, a new car!
While replacing and repairing the keyhole of my father's APRIO, which was the victim of an attempted theft, I also replaced the cowl! This is a very large cowl! The old OEM cowl was reborn as a shiny new cowl, and it feels like a new car! If you look closely, you can see that there was some dust in the cowl and the mounting holes did not fit slightly, but it is just a matter of widening the holes and doing some other simple things! The material of the Cowl is not Pe LePera, but the same level of strength as OEM! This is really a Recommendation! View detail