Reviews
Under Cowl Impressions
The finish was exactly as I had expected. Installation was easy. View detail
Fits: YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250X
Refresh for the 15th year
I bought the Y's Gear exterior before it went out of print, because the Blue exterior of the early model was getting worn out. I also like that it looks like WGP 50th anniversary color. View detail
NinjaZX-10RRCarbon SeatWing
Normal, which does not fit in at all, has a Large keyhole, so it is naturally processed by File.
I have been purchasing a wide range of A-TECH Carbon products from exterior to Mirror for a long time!
Quality is commercial Material:It is No. 1 among Carbon products.
View detail
Fits: KAWASAKI KX450F, KAWASAKI KX250F, KAWASAKI KX450, KAWASAKI KX250
There are some areas that are slightly different from NORMAL.
[How is it used?
I bought a used KDX220SR a few years ago to own the last 2CycleEngine in my Motorcycle life.
The exterior was in a crumbly condition with no luster due to aging, so I checked Kawasaki OEM parts to refresh it as much as possible, but the exterior except for the light cowl was already worn out. Discontinued. Condition/Status
The paint tends to peel off easily due to the nature of the material, and when I was searching Webike's site, I found that UFO sells Side Panels! (Color:White only) Before it's sold out!" I bought it with great enthusiasm.
Did you receive the item as per the Image?
As you can see in the product introduction image, the design of the Right Side is slightly different from the Normal parts.:The Rubber chamber heat protection is installed, but the rest of the design is of NORMAL standard.
I would have preferred the same shape as the NORMAL, but there is no other choice, so I am hoping to cover it up well with exterior decaletc.
Was it difficult to install?
also There's a certain kind of product." The Bolt fixing holes are slightly gapped, slightly distorted, etc.
Fortunately, this product was lucky because it only required modification of the hole position.
How did you like it?
The gap between the Side Panel and the Rear Fender is also a bit large, but since it is made by the same UFO, it is not so much of a problem.
More than that, the KDX220SR with LusterLuster's Beauty exterior is dazzling & lovely.
Was "Included Parts:" attached?
All images shown are all that are available, Quantities on Side Panel:Pair (for Left and Right) Is Quantity:1 Set.
As mentioned above, the exhaust system on the Right Side panel&Chamber reduces the heat received by the material.:Rubber products are installed.
Were there any disappointments?
I have. It would be punitive to write that OEMs and Other Brand Products are in a state of collapse. I'm just thankful it's there." Product.
As I mentioned above, there are some individual differences that need to be corrected slightly. I can't do anything but pimp it." Please think carefully before making a purchase if you are
Personally New exterior available." I believe that there is nothing better than
Other items that would be helpful
Point and hang of installation
However, as mentioned above, there may be distortion and Bolt holes may be gapped, so temporarily attach it to the car body and correct any points that need to be corrected.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
If you are able to remove the NORMAL Side Panel, you should have no problem, as you just need to work in the reverse order.
[Notes]
As I've written extensively in the past, it's just that. Other Brand Product So, a certain amount of distortion and Gap will require the buyer to have the guts to correct and install it, and get over it with passion.
[ITEMS TO BUY TOGETHER
Shroud and Rear Fenderetc. can also be replaced for refreshment, and your motorcycle will become beautiful as if it were reborn.
[Opinions and requests to Manufacturer
I know the balance of supply and demand is tight, but could you please resell it?
Once the orders have accumulated to a certain degree." But I would appreciate it if you could help me.
View detail
สปริงชุบมาเงาดีแต่ควรให้ช่างผู้ชำนานติดตั้งให้จะดีกว่า View detail
ตัวสินค้าทำมาได้ขนาดไม่เท่ากับของเดิมติดได้ไม่ค่อยดีเพราะกาวติดให้มาน้อยจนเกินไป View detail
Fitting is outstanding!
The fitting is good and I am satisfied with Large! View detail
It matches well, but has little windbreak effect.
I thought a lot about the blaster cowl before purchasing it. I am very satisfied as it does not harm the RS design and seems to fit well with the tank line.
The paint quality is good and no special defects were found in the product.
However, since the shield is smaller than that of the Sanggik, there is no significant change in wind protection effect.
-------------------------------------------------- -------- I had a lot of concerns with Blaster Cool before purchasing. It does not harm the RS design, and it seems to fit well with the tank line. The quality of the painting is good and no special flaw was found in the product. However, the shield is smaller than the live geek, so the windproof effect does not change. Powered by Google Translator
View detail
Very satisfied.
It fits well and looks great, like a genuine product!
There is a slight interference with the manifold on the right side, so it is inconvenient to widen the gap with the included washer. It would be better if this part was corrected during the manufacturing stage and shipped.
Also, there was a slight defect in the paint, but since I purchased it overseas, it was cumbersome to exchange, so I'm just going to use it.
-------------------------------------------------- -------- It fits well and cool like a genuine product! The right mani folds are slightly interfered with, so there is a hassle to open the intervals with the enclosed washer. In addition, there was a slightly bad painting surface, but it was cumbersome to buy overseas. Powered by Google Translator
View detail
It's a small difference, but I'm very satisfied.
There doesn't seem to be a big difference in length compared to the original, but there is a noticeable difference when installed with a fenderless.
The paint quality is good, but the silver line color is slightly different compared to the genuine product.
There is a slight difference after installation, but it definitely has the effect of making the bike look bigger, so I am very satisfied. -------------------------------------------------- -------- There is no big difference in the length of the pure, but it is significantly different when it is mounted with the font. The seal quality is also good, but the silver line color is slightly different compared to the genuine product. It's a bit different from the installation, but it's definitely a bigger bike. Powered by Google Translator
View detail
It has been 2 years since I ordered it….
It has been two years since I ordered it and I still have not received it.
I am already dismayed.
I can't tell you how many times I have had delivery delays.
I know they don't care about meeting deadlines.
I thought MotorcycleBody wouldn't wait this long.
If you are planning to purchase Parts from this Manufacturer
I think you should think very carefully before ordering.
You may have a bad experience.
View detail
Fits: KAWASAKI KX450
Purchase recommended while parts are available.
[How is it used?
I purchased this product to refresh the exterior of my KDX220SR, which had become crusty due to UV rays and age-related deterioration.
Kawasaki OEM Parts already has an exterior other than light cowl. Discontinued. I was wandering around Webike's site and found this product, so I ordered it immediately! Thank you very much.
Did you receive the item as per the Image?
I heard that originally you could choose between Lime green or White, but now only White is on the lineup... I must be grateful just to be able to get the exterior of a Motorcycle that is 20 years old.
Was it difficult to install?
It is a completely simple process and is simply installed in the reverse order of the OEMShroud that was removed from the vehicle body.
How did you like it?
The design is the same, so nothing has changed in terms of functionality, but as I mentioned above, my vehicle had a crusty exterior, so it is now beautiful to look at.
It is a world of complete self-satisfaction, but I am happy just looking at my car in its Beauty exterior.
Was "Included Parts:" attached?
Quantity:Pair (for Left and Right) Side cowl of Quantity:This is a 1 Set only product, with no Included Parts:or Instruction Manual.
Were there any disappointments?
Nothing, I want a Shroud with the same design as the OEM Product." was the hope, so it is sufficient.
Other items that would be helpful
Point and hang of installation
In a sense, this product is also like OEM parts, so there is no hang or anything, but it is definitely better to temporarily assemble the product and adjust the overall adjustment before fixing it in place, just to be sure.
In my case, Side cowl, Rear Fender and Fuel Tank are Other Brand Products. I checked if the gap was not too wide, or if the distortion was not too much, etc., before fixing them in place.
[Availability and clarity of the Instruction Manual
No Instruction Manual, no, but as noted above. All you have to do is remove the same type of parts that were originally installed and install them in the same way." Therefore, an Instruction Manual will not be necessary.
[Notes]
Nothing in particular, but if it is an Other Brand Product Screw holes won't fit." As I mentioned above, this is a situation that can happen on a rather regular basis. "Temporary group." Check the individual balances carefully in the following table, and make modifications as necessary to ensure that they are installed properly.
[ITEMS TO BUY TOGETHER
Since the motorcycles themselves are more than 20 years old, sales of OEM parts as well as other brand products are about to end.
It may be a good idea to replace what you can while you can afford it! (including keeping it Stock).
[Opinions and requests to Manufacturer
As a Minor car enthusiast, I would appreciate it if you could reproduce the product from time to time, even if it is only after orders have accumulated.
View detail
Fits: KAWASAKI KX450
As expected of an OEM product, the precision is perfect.
[How is it used?
I purchased this product to refresh the exterior of my KDX220SR, which had become crusty due to UV rays and age-related deterioration.
Kawasaki OEM Parts already has an exterior other than light cowl. Discontinued. I was wandering around Webike's site and found this product, so I ordered it immediately! Thank you very much.
Did you receive the item as per the Image?
I heard that originally you could choose between Lime green or White, but now only White is on the lineup... I must be grateful just to be able to get the exterior of a Motorcycle that is 20 years old.
Was it difficult to install?
It is a completely simple process and is simply installed in the reverse order of the OEMShroud that was removed from the vehicle body.
How did you like it?
The design is the same, so nothing has changed in terms of functionality, but as I mentioned above, my vehicle had a crusty exterior, so it is now beautiful to look at.
It is a world of complete self-satisfaction, but I am happy just looking at my car in its Beauty exterior.
Was "Included Parts:" attached?
Quantity:Pair (for Left and Right) Side cowl of Quantity:This is a 1 Set only product, with no Included Parts:or Instruction Manual.
Were there any disappointments?
Nothing, I want a Shroud with the same design as the OEM Product." was the hope, so it is sufficient.
Other items that would be helpful
Point and hang of installation
In a sense, this product is also like OEM parts, so there is no hang or anything, but it is definitely better to temporarily assemble the product and adjust the overall adjustment before fixing it in place, just to be sure.
In my case, Side cowl, Rear Fender and Fuel Tank are Other Brand Products. I checked if the gap was not too wide, or if the distortion was not too much, etc., before fixing them in place.
[Availability and clarity of the Instruction Manual
No Instruction Manual, no, but as noted above. All you have to do is remove the same type of parts that were originally installed and install them in the same way." Therefore, an Instruction Manual will not be necessary.
[Notes]
Nothing in particular, but if it is an Other Brand Product Screw holes won't fit." As I mentioned above, this is a situation that can happen on a rather regular basis. "Temporary group." Check the individual balances carefully in the following table, and make modifications as necessary to ensure that they are installed properly.
[ITEMS TO BUY TOGETHER
Since the motorcycles themselves are more than 20 years old, sales of OEM parts as well as other brand products are about to end.
It may be a good idea to replace what you can while you can afford it! (including keeping it Stock).
[Opinions and requests to Manufacturer
As a Minor car enthusiast, I would appreciate it if you could reproduce the product from time to time, even if it is only after orders have accumulated.
View detail
Fits: KAWASAKI KX450
Buy while you can get it.
[How is it used?
I purchased this product to refresh the exterior of my KDX220SR, which had become crusty due to UV rays and age-related deterioration.
Kawasaki OEM Parts already has an exterior other than light cowl. Discontinued. I was wandering around Webike's site and found this product, so I ordered it immediately! Thank you very much.
Did you receive the item as per the Image?
I heard that originally you could choose between Lime green or White, but now only White is on the lineup... I must be grateful just to be able to get the exterior of a Motorcycle that is 20 years old.
Was it difficult to install?
It is a completely simple process and is simply installed in the reverse order of the OEMShroud that was removed from the vehicle body.
How did you like it?
The design is the same, so nothing has changed in terms of functionality, but as I mentioned above, my vehicle had a crusty exterior, so it is now beautiful to look at.
It is a world of complete self-satisfaction, but I am happy just looking at my car in its Beauty exterior.
Was "Included Parts:" attached?
Quantity:Pair (for Left and Right) Side cowl of Quantity:This is a 1 Set only product, with no Included Parts:or Instruction Manual.
Were there any disappointments?
Nothing, I want a Shroud with the same design as the OEM Product." was the hope, so it is sufficient.
Other items that would be helpful
Point and hang of installation
In a sense, this product is also like OEM parts, so there is no hang or anything, but it is definitely better to temporarily assemble the product and adjust the overall adjustment before fixing it in place, just to be sure.
In my case, Side cowl, Rear Fender and Fuel Tank are Other Brand Products. I checked if the gap was not too wide, or if the distortion was not too much, etc., before fixing them in place.
[Availability and clarity of the Instruction Manual
No Instruction Manual, no, but as noted above. All you have to do is remove the same type of parts that were originally installed and install them in the same way." Therefore, an Instruction Manual will not be necessary.
[Notes]
Nothing in particular, but if it is an Other Brand Product Screw holes won't fit." As I mentioned above, this is a situation that can happen on a rather regular basis. "Temporary group." Check the individual balances carefully in the following table, and make modifications as necessary to ensure that they are installed properly.
[ITEMS TO BUY TOGETHER
Since the motorcycles themselves are more than 20 years old, sales of OEM parts as well as other brand products are about to end.
It may be a good idea to replace what you can while you can afford it! (including keeping it Stock).
[Opinions and requests to Manufacturer
As a Minor car enthusiast, I would appreciate it if you could reproduce the product from time to time, even if it is only after orders have accumulated.
View detail
Not bad...
Very expensive but at least good quality. Delivery is fast thought. Happy with the purchase. View detail
I tried to be a human pillar.
I just installed it.
It is still too hot to ride.
I was sweating just installing it.
I thought this one was cooler than the Bikini cowl by the same manufacturer, which has many reviews, so I bought it even though there are no reviews of the product.
I didn't mind the SIDE design etc. and thought it was definitely better looking in person than in the Site photo.
To install, remove the light lens, and then fasten it by playing with the bolt that supports the light case?
Here, when the Bolt is tightened from the outside of the Cowl, the Cowl is slightly dented, but I think it is Spec.
Next, fasten the bolt on the back side of the Horn, which is a challenge unless you have good dexterity.
I will post photos for your reference if you are considering it.
View detail
the worst
I wanted the basic aluminum color, so I bought it because I thought it was an unpainted product. However, the quality of the product is too bad. It's like a defective product, but the manufacturer says there's no problem. I just use it because it's a hassle to return it. Please consider the purchase of unpainted products by referring to the photo View detail
good Visor
very good item Be sure to focus your comments on the product. We do not accept your post if you use same alphabet, number, or mark over 3 characters in a row. We would delete the images if you post the unrelated images to the products or motorcycles, or you post the images that do not meet a requirement of the below. Then we evaluate your post as text. HTML tags are not allowed. Reviews require prior approval before they will be displayed View detail
It can be installed without any trouble.
Texture and accuracy are not as good as they are cheap.
I can install it for the time being, but I would have preferred to keep the OEM version instead of changing it.
View detail
Exclusive, after all!
I used to install Universal Product's products, but the size and small design were not so good, but Road Comet is still a dedicated product and has an outstanding fit!
The paint job is beautiful and the rounded shape is my favorite!
If you want a Bikini cowl, it was a 3 month wait, but it is worth the wait.
View detail