Reviews
They are bigger than I thought...but they do look good. Not bad! I wish it had a bit more angle closer to parallel to the ground. It is now at 4 o'clock position. I also wish the color (black) was more closer to the Body Color.
They are bigger than I thought...but they do look good. Not bad! I wish it had a bit more angle closer to parallel to the ground. It is now at 4 o'clock position. I also wish the color (black) was more closer to the Body Color. View detail
Fits: HONDA PCX150, HONDA PCX125 [JF28] Early model, HONDA PCX125 [JF28] Late model, HONDA PCX125 [JF28] Early model, HONDA PCX125 [JF28] Late model
Easy to fit. Had to use some rubber and foam to reduce vibration at certain RPM as I did not want to drill the upper fairing during fitting. Greatly improves the look of the scooter front end. Finish is good and colour matches well with oem panels. Ve
Easy to fit. Had to use some rubber and foam to reduce vibration at certain RPM as I did not want to drill the upper fairing during fitting. Greatly improves the look of the scooter front end. Finish is good and colour matches well with oem panels. Very impressed by this part at this price. Recommended to anyone wanting to improve the look of their PCX View detail
I purchased this part just to change the look. I have U.S YOSHIMURA's full exhaust, and there is a interference between this new cowl and the pipe, so I cut off that portion of cowl and installed. You need extra careful if you have change
I purchased this part just to change the look.
I have U.S YOSHIMURA's full exhaust, and there is a interference between this new cowl and the pipe, so I cut off that portion of cowl and installed.
You need extra careful if you have changed exhaust pipes.
( the installation is very easy.)
This is a small thing, but I was little surprised that there is a hole and plug to drain water.
Of course FRP/ White need to be painted.
View detail
It purchased to TZR 3MA 89 models.Although it might be an unavoidable thing which is been a handmade article and which accumulates, compared with brand-name parts, it was thought too that structure was coarse. The position of the hole where
It purchased to TZR 3MA 89 models.Although it might be an unavoidable thing which is been a
handmade article and which accumulates, compared with brand-name parts, it was thought too that structure was coarse.
The position of the hole where
(1) Silencer passes along the point worried concretely has shifted.There is a linear dent on
(2) Cowl surface in some places (refer to picture).It is distorted on the Level which the form of the whole
(3) Cowl looks at and understands by the eye, and is right-and-left asymmetry.The hole for Cowl attachment by the side of
(4) front is located to an edge in the last place, and it is likely to be divided even if it sees to layman's appraisal.There are only four
(5) Cowl fitting parts, and they are slightly uneasy.It is.If all are the broader-minded ones, it may not be worrisome, but since I am a Type which cannot sleep night also, either when I am nervous and am worried, I am putting in and using the hand in the made range.
Although only bad points were written, I appreciate that I am having the Cowl of front vehicles made for 20 years or more.
View detail
nice bikini cowl, but the screw turns rust after the rain. it vibrate when runs into hump or uneven road. delivery can say very fast, packing in good condition
nice bikini cowl, but the screw turns rust after the rain. it vibrate when runs into hump or uneven road. delivery can say very fast, packing in good condition View detail
Although the Top box was attached, it was wavering by how, whether it takes with a Style, or practicality is taken.It referred to predecessors' Impression, and this was purchased in order to attach the Carrier of KITAKO to PCX by itself.Exchange was easy
Although the Top box was attached, it was wavering by how, whether it takes with a Style, or practicality is taken.It referred to predecessors' Impression, and this was purchased in order to attach the Carrier of KITAKO to PCX by itself.Exchange was easy when it did.Although the Screw position of a car body and a Carrier was correct, I think that a system is touch that attachment is possible bad barely, and the hole position of a Carrier and a Cover broke right in the middle in the hole where it is smaller to process it by oneself (probably).The crevice between the
holes was filled up with "Bath Coke."If a Top box is not pleasing since there is a pure Cover, it can return to the first Style at any time.
View detail
Bolts are examined in a Home center, and it is early positively, and is easy and I think that it is certain rather than attaching by oneself.
Bolts are examined in a Home center, and it is early positively, and is easy and I think that it is certain rather than attaching by oneself. View detail
Compared with a Normal-tail Curl, the difference in the die length of a Curl can be felt clear. It is regrettable that there is however no cuff in that it is a product made from FRP and a Curl.
Compared with a Normal-tail Curl, the difference in the die length of a Curl can be felt clear.
It is regrettable that there is however no cuff in that it is a product made from FRP and a Curl.
View detail
It purchased, in order to attach the 130phi general-purpose Bikini cowl of the company. Two are purchased although there were 6 mm and 8 mm. It has attached somehow in the direction of 6 mm. Although it was also the Bikini
It purchased, in order to attach the 130phi general-purpose Bikini cowl of the company.
Two are purchased although there were 6 mm and 8 mm.
It has attached somehow in the direction of 6 mm.
Although it was also the
Bikini cowl, since the instruction manual was not attached, it wavered in attachment a little.
View detail
[Webike Monitor] It is the impression to which the whole Undercowl (Carbon) wearing of wish became tight. Since it is the elegance corresponding to pure Exhaust pipe, attachment is satisfactory. quality is not so high.
[Webike Monitor] It is the impression to which the whole Undercowl (Carbon) wearing
of
wish became tight.
Since it is the elegance corresponding to
pure Exhaust pipe, attachment is satisfactory.
quality is not so high.
The
Carbon has some Gaps.
It is a grade which is not known unless it sees near
*.
Be below careful of those of whom
purchase is done.
description description [cautions]
book products are premised on paint application.
Please be sure to attach to a main part, after painting.
-- if it is in a state as it is -- discoloration -- it deteriorates and becomes a cause of breakage.
I thought that it remained as it is and could use.
Since it is unavoidable, a Urethane Clear is purchased separately.
if so written to
description-of-item Page --
-- Also purchased the CLEAR Spray simultaneously...
-- it is regrettable at unexpected expenses.
View detail
It purchased in order to attach the general-purpose Bikini cowl of the company. It was not attached to the APE 50 in the ordinary way of attaching. Even if it did not attach a Washer with wide width, since a Bikini cowl did not enter, dire
It purchased in order to attach the general-purpose Bikini cowl of the company.
It was not attached to the
APE 50 in the ordinary way of attaching.
Even if it did not attach a Washer with wide
width, since a Bikini cowl did not enter, direction of the
Bolt was made reverse and attached forcibly.
View detail
Unsatisfactorily, seemingly contact will be bad, and does not stick by management of wiring, or it does not attach. I thought whether to have been the texture of there there, since it is called Class B article as it is in explanation. There wa
Unsatisfactorily, seemingly contact will be bad, and does not stick by management of wiring, or it does not attach.
I thought whether to have been the texture of there there, since it is called Class B article as it is in
explanation.
There was a
dent.
It is the semantic satisfaction which corresponded perfectly to
, however initial failure!
View detail
Fits: KAWASAKI GPZ900R NINJA
It thought whether Mr. MARVELOUS was a Bolt on, and purchased. Although the car body and a Screen are unprocessed and being attached, the Inner cowl does not suit too whether it is the fate of an external Parts at all ... Since the product of
It thought whether Mr. MARVELOUS was a Bolt on, and purchased.
Although the
car body and a Screen are unprocessed and being attached, the
Inner cowl does not suit too whether it is the fate of an external Parts at all ...
Since the product of
other company did not suit, it purchased this time, but it was the same.
It is regrettable because the
Design is good.
In the direction in which
Inner attachment is not, it is recommended.
View detail
It was used when equipping with the company's Bikini cowl. When saying from the conclusion, since it was unprocessed and equipped, there was no problem. The Size of , however a special shape portion was somewhat large, and unless it extended the
It was used when equipping with the company's Bikini cowl.
When saying from the
conclusion, since it was unprocessed and equipped, there was no problem.
The Size of
, however a special shape portion was somewhat large, and unless it extended the Bikini cowl right and left, it was not able to equip.
although it is conscientious since the Parts which the mind of the
rubber washer etc. heard was a Set -- as comment -- honesty -- it is delicate.
It is used being businesslike in since it is
general-purpose article now.
View detail
The = Plating or Carbon in which it becomes good parenthesizing a Motorcycle (privately). Although it is , it is rust that I want you to take care by one Plating (^_^;) Since rust will occur from there if it gets damaged since it is a Heel when the d
The = Plating or Carbon in which it becomes good parenthesizing a Motorcycle (privately).
Although it is
, it is rust that I want you to take care by one Plating (^_^;) Since rust will occur from there if it gets damaged since it is a Heel when the direction which carried out the Tandem is a woman, since it is the
Plating fan cover, it is attention.
I am dreadful of it, and although the Plating is not attached, I would like to attach it to ↓↓ individual target!! Since the
Carbon is expensive (;'Д`)
View detail
Fits: KAWASAKI D Tracker, SUZUKI 250SB
Although a Style is good, the purer one is thick and intensity has it. I think that it is good for the part which carries out a weight saving.
Although a Style is good, the purer one is thick and intensity has it.
I think that it is good for the part which carries out a weight saving.
View detail
Fits: Others , HONDA CB400SF, HONDA CB-1, SUZUKI GSX400, SUZUKI BANDIT250, SUZUKI GSX1400, SUZUKI INAZUMA400, KAWASAKI W650, KAWASAKI ZRX1200, KAWASAKI ZRX1100-2, KAWASAKI ZR-7, KAWASAKI BALIUS2, SUZUKI ST250, SUZUKI VOLTY, KAWASAKI ZRX-2, KAWASAKI W400, KAWASAKI W800, KAWASAKI BALIUS, YAMAHA RENAISSA, YAMAHA R1-Z
A Design is the highest. Dissatisfied point ... Say that attachment attaches to a Headlight cover by two points. Shakiness is a little worrisome. Since the Horn in the SIDE of a Cowl and the portion (portion from the screw-thread end o
A Design is the highest.
Dissatisfied point ... Say that attachment attaches to a Headlight cover by two points.
Shakiness is a little worrisome.
Since the Horn in the SIDE of a Cowl and the portion (portion from the screw-thread end of a Screen to the 3rd) between Screen parts are thin again, it vibrates with a bull bull during a run.
I think that it will be the highest if even these two points do not exist.
View detail
Fits: KAWASAKI D Tracker, SUZUKI 250SB
The structure of genuine is more solid. Since I think that it is good considering a price, I'm not dissatisfied. I think the protection of a rubber should be attached to the attaching part of a screw.
The structure of genuine is more solid. Since I think that it is good considering a price, I'm not dissatisfied. I think the protection of a rubber should be attached to the attaching part of a screw. View detail
Only Upper Cowls were exchanged as it is pure. since it interferes with the Upper Inner Cowl and a Side cowl -- processing -- it is indispensable. Although it is the fate of a externa
Only Upper Cowls were exchanged as it is pure.
since it interferes with the
Upper Inner Cowl and a Side cowl -- processing -- it is indispensable.
Although it is the fate of a
external Cowl, since a crevice is made considerably among Cowls, cautions are required.
Although
wearing is delayed considerably, looks are as expected and it has satisfied them.
View detail
It is appropriation to ER-6n (2010 models). Since it was full compatible, attachment was completed satisfactorily at all. Although there is a rubber for fixation to a tank in normal, if it attaches as it is since there is nothing to this product,
It is appropriation to ER-6n (2010 models).
Since it was full compatible, attachment was completed satisfactorily at all.
Although there is a rubber for fixation to a tank in normal, if it attaches as it is since there is nothing to this product, he will interfere with a tank and I will be earnestly stained with a crack.
.
.
View detail