Reviews
Cut is not so good
I compared it with OEM Product. Making itself is nice, but Quantity : Pair (for Left and Right) It is mandatory to rework with half finish as if being cut asymmetrically. Cut too much, or Cut finished halfway .... If you can not fix it yourself, please purchase OEM Product. View detail
The unexpected struggle
I bought it with apparent appearance. I think that it is good and cheap, because of the price, but I had to bend the Bracket when attaching it. The biggest Neck had to change Handlebar to Separate and it was useless. View detail
Fits: HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSR mini, HONDA NSR80, HONDA NSR50
Style is good!
There is no Instruction Manual and the shape of Seat rubber does not match!
It is useless unless you can process holes to a certain extent, such as drilling and cutting!
Seat shape is cool !!
View detail
Fits: HARLEY-DAVIDSON SPORTSTER Family
so-so
I did not agree a little with SIDE Ka Bar mount. But since it stopped at Bolt, it was gone. The bulge of the Side cover becomes Large more than NORMAL. I am anxious to hit your feet when I drew my feet.. I did not care about ETCCard etc in Touring etc.. There was something different in the installation Bracket, but we had it corresponded. It was the XL 1200 R 08 year, but if the year is different, Bracket is different so please check the year. View detail
We purchase ZrX1200DAEG from now
I attach BEET's MASARTR 3D Racing Type Exhaust System to this,
Please advise if Under Cowl can be equipped Ad Vise thank you..
View detail
Fits: HONDA RVF400
Worried about Damage to Cowl
I arrived on the day before the 8th tomorrow was done at Suzuka and I am glad and went to Solo touring on the next day installing.
After running for 5 hours back and forth in summer hot summer, Damage from Cowl was attached since installing, so I tried removing it
Although it is not enough to peel off the paint, it rubbed somewhat with Cowl.
If you want to attach it all the time, you must use the scratch on the side of Cowl in preparation.
Although making is not complicated, it is better to be careful when installing as there are scraps etc. in some places.
I recommend that you use the basic, painted and used, but I think that it would be OK if you just think that Black is good.
View detail
To eliminate cheap Plastic
Heat cover is Carbon so it gets dangerous
Dare to do with FRPBlack.
Because it is a place that I do not want to paint, thinking about heat
I just installed it
It took delivery time, 8 weeks
This time, I was able to install safely
Surface treatment is miscellaneous.
I polished myself.
View detail
If the windshield effect is better - - - -
AeroSpec. Purchase.
Size (height) I did not expect the windshield effect from, and I bought it with consciousness.
Well, after all, 100 km from the expressway / Helmet hits the wind more than I imagined running with h or more. My height 179 cm. If the slope of the windshield is more steep (If the height is about 5 cm after the height) I will continue to think.
Design is also Large Off, but I would like you to consider more practicality than that.
Also, as the speed increases, the whole Cowl vibrates. It is a three point screw stop on the side of the Light and the bottom, so I guess it can not be helped.
A simple Instruction Manual is attached and you can install it in less than an hour if you proceed according to it.
However, the installation position of the screw at the bottom of the Light was slightly misaligned.
I ordered Candy Ali GSX 400 E RED, but the paint color is a satisfying hue.
Most people think that they are not accessories but equipment..
It is also a reason for purchasing that I wanted to install the Cigar socket in a location that is not exposed to rain.
Cigar socket 2 series (New IngDC StationTWINSocket) On the inside Left Side (Drill holes) I installed it.. A triple thing may be impossible.
Right Side has a lot of Harness, so it will be a problem if trouble occurs, so I made it to Left Side.
It will be under the school, so it should not rain while driving.
Quantity : Pair (for Left and Right) I think that it was easier to work if I was about 1 centimeter wider.
It is ★ ★ ★ because the windshield effect is deficient for me.
View detail
Is it a price?... I am satisfied..
While OEM is expensive or out of print, I think that price is good. Cover Mall etc. And fitting etc with cutting etc.. Processing is required, but OEM same etc.. It is impossible to obtain Quality of. By all means, some gaps. Is not it the scope of compromise... View detail
I like NAKED, but ...
I like running tokotoko with basic NAKED, but as expected it is hard.
So, buy this which is not too big.
Mounting Easy.
Then changed to Aero Screen and even faster became easier.
Take-up Boltetc. Has changed to Gold.
The point of dissatisfaction is insufficient strength?. It has a feeling of fever at high speed and reinforces it with Aluminum plate on the Reverse side.
View detail
Coloring is beautiful
Purchase Red. Red made it a reliable Manufacturer because it faded easily.
Although the price is high, Anodized is hard to discolor compared to ZETA etc..
I used it to fix Shroud of RMX, but because I do not have a short Size, I cut it and used it.
Because it is an expensive item I want you to choose more like Length.
View detail
Satisfied with the brilliance of Carbon
I bought it for matching with Carbon Exhaust System.
Although it is Minus that processing is necessary at the time of installation, both workmanship and appearance are satisfied.
Since there is not much change with Side cover alone, I think that it will look more different when combined with the Inner panel.
View detail
Wonderlich : Wunderlich Front cowl "Da
Easy to install, you can do it without problems if you do while looking at Instruction Manual. Cowl's making is also solid, Fit feeling is good. Impression of RnineT changes as Large changes if installed Right easy for Custom. View detail
CF4MA's handy Rear spoiler
Once installed, it is as good as it is.
Though it may be useless if it considers low price, there are three points to worry about.
As a matter of course naturally you do not mind - -.
(1) There is BALI in an unobtrusive place.
There is quite a BALI in the detail which is not noticeable but not conspicuous,
Since it is painted from above, taking BALI
The paint will also come off.
* You can take BALI if you rub it by hand.
(2) Coarse paintings are out of sight.
It may be useless because it is a part that is unobtrusive although there is unevenness.
(3) Spoiler mounting holes are out of position.
As far as I can see, I can not imagine individual differences, but some
You may need adjustments.
Large It is work in the assumed rather than a wide adjustment.
Peeling off of paint can be dealt with by Touch pan, but there is some resistance to paint from the beginning.
Although I evaluated it dryly, I want companies to work hard because companies are striving to sell a lot of attractive products at a low price.
If you install it I think that it looks good as it is shown in the picture.
View detail
A-TECH products in general
There is Merit due to its appearance and lightness, but here I will dare to enumerate mainly Demerit.
First, A-TECH Material : It is hard to say that it is all about Carbon products, but it is difficult to wear polo.
Although it looks very good, when I purchase the Under Cowl for ZX - 14R, when I try to install it as is, a strong Stress is applied to the fixed part with Middle cowl, - - - I thought "?".
Also, because it also interferes with Body, processing by File etc. is also required.
I avoided interference with Body by partially processing by File and biting 3 mm thick Color.
People who are not resistant to such processing, even if they can not be attached "Let's process it!" I think that A-TECH products will be suitable.
(There are also cases where you can attach some pongs... )
View detail
For Seat Cowl processing
I do not like NORMAL's Seat Cowl, so I was looking for a change in shape, I felt a downhill feeling Parenthesis I decided on this Cowl. Also at the same price etc. Although it was cheap compared to the product, it was uneasy whether it was Pa LePera, but it is satisfactory with sufficient thickness. In the case of CBR I attach a Seat pedestal, but because the hole positions did not match, I extended the hole with File and installed it. Processing is not particularly difficult because it is FRP.
(note : Seat Cowl of the picture has been cut and the shape has been changed slightly)
View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey
Plating Side Cover
I bought it for MONKEY for Right Side.
After riding on a rainy day, if you do not clean it and leave it for a while, things like point rust can not be taken. We do not have to worry about resin Parts and need extraordinary cleaning.
Because there is a punch at the center in the center part, pasting Seal as it is will cause air bubbles.
View detail
Anyway, I bought it
I bought the 130 Pie Bikini cowl of the company, I purchased it 8 mm Meter
By the way, APE is Bolt, NORMAL 's Bolt use, the photo is taken, the attached
Washer wore it without using it
View detail
The surface is rough
It is Gel Coating, but it was not beautiful enough to paint as it is.
First of all, in order to fill in the fine irregularities on the surface, we have to process the surface with Pate.
Design is nice Parenthesis ♪ It is certain.
View detail
At CYGNUS X 1yp...........
Previously I was using KITACO but purchasing this item with Heador every change in Projectorization. Double-sided tape got removed so paste the 3M at home Finally installed. Result KITACO is better View detail