Reviews
unintelligible
They ordered it on August 2 and are waiting about 2 months for delivery
i was looking at other items on webike and noticed that the item I ordered was in stock, which is strange! When I looked at the details of my order history, I wondered why "Cancellation It was shown as
Naturally, I don't remember this product being Canceled by us, and this product itself It is also marked as a non-cancelable item
I wanted to ask a question over the phone, but the only contact information is email, so I asked via email It's been a few days and I haven't heard from them … Too bad
View detail
Cosmetology is good, but ………
Installed on my friend's APRIO
Uh, yeah
It's cheap
Screw holes don't fit, the gap is quite wide
I think Ime-Chain would be a good idea
I wouldn't buy it if I were you
View detail
It is hard for the Large to open the Key shutter.
There is no problem if you just insert the key and use it normally,
Finally, it is hard to open it when closing Shutter.
It's just Cover, but the accuracy is bad.
View detail
I do not think it is made by KITACO Quality
Were you abandoned as a hard-to-see part? Carbon folds on Rear side do not match, also the division part of Center is cheating with Matte black paint on the back side, really KITACO made? Thailand outsourced article? Exhaust pipe exhaust heat function Doubtful Design. View detail
Fits: HONDA Press Cub 50, HONDA Super Cub 90, HONDA Super Cub 70, HONDA Super Cub 50, HONDA Press Cub 50, HONDA Super Cub 90, HONDA Super Cub 70, HONDA Super Cub 50
I needed some ingenuity
My CUB is Custom. Since we did not have a description of Custom impossible for product application, I bought it.
If you try to replace Knob's part interfere with the Side cover and can not be tightened. I was able to replace the handy Washer and Color in the Shaft part.
I'm glad I could use Washer and Color.
I think that the product itself became convenient because the tool for putting out the tool no longer needed.
View detail
Processing required for installation
Title As stitching is required for processing
Dry carbon so I think there are individual differences
In my case hole position of Mirror (Small processing) Attaching Side cowl (Interference part Cut of Inner 5 mm of OEM)
Bottom side of Upper (SIDE and interfering part cut by about 3 mm)
At the same time, the back Cover that comes in at the same time uses the OEM because the hole position gap and the fit are hard
The person who installs by yourself is Large strange
We recommend that you put it on Shop
I thought that it was necessary to do a pounding or a little processing, but it is not Quality that matches this Gold amount
As I mentioned earlier, I think that there are individual differences so it may be Hap
Good point It looks like R after installation is cool.
View detail
It was a cheap buy!
I was worried about it because I was not allowed to return it, but it is after all.
I want you to clearly display Screw clasp instead of Double-sided Tape. On the ground plane
I did not fit perfectly and crimped Screw a bit stronger and it cracked. This is made overseas
Is not it. The feeling of use seems to be weak at feet. It looks pretty good
It is cool.. But I regret that I should have made it OEM.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400
Only looks.
Of course it is only a product that looks like it, but before installing it, I broke the part to tighten Screw because it is soft. It seems like throwing out Gold as if price is pretty expensive but it seems to break. Moreover, Quantity : It is regrettable because it is the second set. Quantity : The 1st set thought whether I had a fault, but this time I put it in a box before installation and it was broken just by carrying it. I want you to think about the strength a little more. View detail
It is insufficient in strength.
It looks good on Plating, but... There seems to be a part with insufficient strength. Because the material is harder than the material of the OEM, due to the vibration of the Engine, the part to be stopped with + Screw will break. Engine's Bore upetc. As the vibration of Engine increases, it will be more likely to crack.
I repaired many times with instant adhesive...
View detail
Cospar good
Although it is an OEM Shape, there is no Light hole or Bracket
Screen mounting holes and Cowl mounting holes are merely open
Hole etc etc for competition vehicles. It seems to be just right as it seems to be unnecessary
View detail
It looks nice
CB400SB (NC42) Painted to Red and fitted.
Instruction Manual Exactly attached to places as raw.
STANDetc. No interference at all, accuracy is no problem.
It functions as Oil receiving without problem.
..., but the body touches the ground before the Full bank floating and falls over.
It will not be used as it is at Circuit and Pass.
I get in touch with a little Gap on the street ride.
CB400SB (Or SF) It is that the design of itself is not a premise to wear an Under Cowl.
Sorry for the high degree of perfection in appearance.
Since it can not be helped, it shifted considerably in the front direction and it stopped with Tie Wrap.
While this is grounding the Under Cowl CHALYCHALY, you can do a full bank up to the extent of footpeg rubbing.
It seems like people in a riding way that does not let you bank in appearance is good.
View detail
Wow ~!
Buy Full Exhaust SystemType.
ZrX 1200 DAEG, beetna Star 3 DFull Exhaust System.
Considerable, need for processing.
SETTING, there are 4 tubes in the water pipe.
Is it reasonable, is not it?
People who attach themselves are painting, processing, quite a tool,
Time is necessary,
Arrival, goods, BALI, and Crack were in!
It is troublesome, so it does not objection!
Even though it is tens of thousands of items, please inspect it !!
Dirt and oil stains were attached.
View detail
Fits: HONDA Grom(MSX125), HONDA Grom(MSX125)
Even though it is an exclusive product, ingenuity is necessary
I think only to remove the OEM and install it
We had to fill the space with Aluminum Collar etc..
Included Parts because it is drilled : I wanted you to put it in, so the evaluation is low.
Odd so I can fulfill the purpose
View detail
Full of scratches ...
The shape is not strongest strongest.
While careful, scraping according to the current car many times ...
The curing Tape was going, but repeating it over and over, there are scars around Tank in the fossil ...
These hands match the current car!
I want you to think about the range that can be returned.
View detail
I go riding in rain often, so I purchased it to cover the exhaust pipes from dirt. The specification is black gel coating. There are only 3 screws to mount. I felt 2 screws on top were a little hard work. Moreover, it almost interfere to the bottom of rad
I go riding in rain often, so I purchased it to cover the exhaust pipes from dirt. The specification is black gel coating. There are only 3 screws to mount. I felt 2 screws on top were a little hard work. Moreover, it almost interfere to the bottom of radiator, so I put some cushion to keep the clearance. It does prevent dirt onto the pipe as I wanted, but now when I remove the under cowl, I have to remove it together. I don't remove the under cowl that often, but I feel the condition is more complicated. I don' like it much. There are 2 stickers come with the part, I don't like their design either. View detail
Fits: YAMAHA APRIO, YAMAHA APRIO, YAMAHA APRIO
APRIO SA11J was equipped. Too, there was much BALI, and fitting was bad and some processings and repair were required of the quality as ? price. -- since it did not expect to there from the first, the price is also reasonable --
APRIO SA11J was equipped.
Too, there was much BALI, and
fitting was bad and some processings and repair were required of the quality as ? price.
-- since it did not expect to there from the first, the
price is also reasonable --
--
which was not regretted in particular -- since it is this price, to those who process it by themselves, I think that it is a Recommendation!
View detail
Although it could be satisfied with form enough, after the article arrived at it being alike, when [ it was heard beforehand that was a Cover for Normal tanks ] it attached, it was a Side cover for DOREMI Tanks.
Although it could be satisfied with form enough, after the article arrived at it being alike, when [ it was heard beforehand that was a Cover for Normal tanks ] it attached, it was a Side cover for DOREMI Tanks. View detail
Although structure is dramatically good, it does not suit a Screen, a Louver, and an Inner cowl, either. For a certain reason, about 10 mm of errors do not attach by small processing.
Although structure is dramatically good, it does not suit a Screen, a Louver, and an Inner cowl, either.
For a certain reason, about 10 mm of
errors do not attach by small processing.
View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
One cm of 8M carries out color special purchase of the measure against (it keeps by an inner side) with which making the purchase cannot balance left-hand side by the Stay of ? attachment as it is since 4L MONKEY was exchanged for the D
One cm of 8M carries out color special purchase of the measure against
(it keeps by an inner side) with which making the purchase
cannot balance left-hand side by the Stay of ?
attachment as it is since 4L MONKEY was exchanged for the Down muffler,
Kana which maintains a Balance if it puts into the car-body side of the
Stay?
View detail
Fits: YAMAHA APRIO, YAMAHA APRIO, YAMAHA APRIO
Since tabling had shifted delicately that it was pure, the crevice between some arose. But it is tolerance individually.
Since tabling had shifted delicately that it was pure, the crevice between some arose. But it is tolerance individually. View detail