Reviews
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Meter visor even cooler than expected??
I purchased the ENDURANCE Meter visorLong set + installation kit for CT125.
I was a little excited when I unpacked the package because I had been planning to install this product for a long time....... The installation was easy and took only about 30 minutes without any stress, and it did not interfere with any surrounding parts.
Visor, which looked so small at first sight, now its presence is upgrading HUNTER to Wilde and I am very satisfied with it. ?? I am sorry for doubting.
Tightening is still the way to go. [Color] Smoke.
Thank you for a really good product.
View detail
![[Exclusive for Race]Under Cowl Set](https://img.webike-cdn.net/catalogue/images/88795/el64126pr1_01_TS.jpg)
ENDURANCE [Exclusive for Race]Under Cowl Set
Molding quality and texture is fairly good its to be expected from fiberglass resin made. I like the fact it comes with all the mounting hardware which makes installation easy. The blue markings i made on the product are areas i need to grind or cut off due to my exhaust set up which i am very aware of before purchasing it, i knew i would be modifying it to make it fit. Product was well packaged and protected. I would advice anyone who purchase this cowl to be aware of what type of exhaust set up you have and be prepared for minor modification but if your a Do It Yourself like myself, it shouldn't be difficult to work around modifying it. On a side note you will need to paint it with the color of your choice as well. View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB
I think it was a little small!
[How is it used?
Purchased with the expectation of wind protection for city driving and short distance touring.
Was the one you received as per Image?
It was exactly what I saw in the product listing, but I wish it were a little larger in size.
Was the installation difficult?
The installation was done by downloading the installation instructions on the Net.
But the installation itself was not like living in a house.
How was your experience with it?
As you said, the wind to the chest seems to have improved, but the wind seems to come to the upper side from the bud root
I wish it had a little more height, but I wonder if there is a special incense for front calipers... I don't know, I haven't actually put it on.
[Included Parts:were they on?
Included Parts:was attached.
However, since it was attached to the Seat, the adhesive glue stuck to the Bolt and Washer, so it took a little time to take the picture.
[Was there anything that disappointed you?
The Bolt and Washer included with the Seat are installed, so this is not RoseRose II, but the items included with the Bracket were packaged in one bag, so it is not RoseRose II.
I thought that if they could have done the same, they wouldn't have lost it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Bracket is not that difficult to install, but the Bolt on the Headlight side must be held down when removing the Bracket and the Bracket must be attached to the Quantities.:I thought it would be better to Set
The left side of the body (brake lever side) has a meter in the hand, so there is a possibility that the washer may drop a little, so we need to be careful.
think
It is better to be careful and watch so that there is no gap when the washer is temporarily fixed in place.
View detail
It was easy!
It was super easy to install, which is good. It looks great and I'm looking forward to the future! View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
For BigFront carriers
I wanted to add a BigFront carrier, so I chose this one.
I used Endurance's Shield in my last car, so I know it's reliable!
View detail
Endurance half crash guard
Very pleased with the quality of this half guard, all the holes lined up and it came with all 6 spacers that go in between the body and the crasg guard. Love the look and it now gives my foot more room when riding. View detail
Installation was easier than expected!
I think this is a great product that is well made and can be ponied up. View detail
It was also installed on a commercial grom!
I was worried about being able to install it on a commercial grom, but I was able to do so after shaving a few places with File.
In my case, I modified two places to avoid the Bolt that holds the Tail lamp under the Rear Sets. (See photo)
These two locations were modified with File. Also, the keyhole to remove the Seat is hidden by the Cowl, so I removed the Wire from the key and modified the Wire to come out from under the Seat to the Rear Fender. (See photo)
Finally, in order to fasten the Over Full Exhaust System, I purchased Bolt, Spacer, etc. for the Exhaust Bracket and Bracket at Endurance, and I also purchased a Stainless Steel Band to fasten the Over Exhaust System. I also purchased a Stainless Steel Band to hold the Over Exhaust System. It took a lot of modifications, but it was like making a plastic model, which was a lot of fun for me.
P.S. Since the Tail lamp is hidden, I modified it to secure 20cm2 as required by law.
View detail
Refreshing appearance
I bought it just for the appearance. Refreshing to see it from the front.
Levels that can use Hexagonal Wrench can be installed.
View detail
Solid for the low price.
I was looking for a Meter visor for my GB350S.
The bracket is well made and can be installed without rattling.
The angle can be adjusted somewhat, so you can set the Style to your preference.
View detail
JC61 Initial Model with MuriKuri attached.
[How is it used?
Decided to modify and install this product for the JC75 to make the Grom JC61Initial Model a Race vehicle.
I looked at the picture on the product page and the Parts List for my JC61, and wondered if the holes were in the same position on the Large body. I thought so.
I thought it would be a cinch to install ….
Was the one you received as per Image?
When we actually tried fitting, we found that the hole position was slightly backward, so we had to make a bracket.
Seat Cowl for JC61 has a flat shape, whereas this product has a lowered mounting hole on the front side.
The position of the Y axis was totally Gap.
Was the installation difficult?
The mounting holes on the front side of the cowl were cut with an electric saw to a large bile, smoothed with a grinder, and a new hole was made in the cowl and a bracket was made.
It was difficult, though, because it was installed on a vehicle that did not conform.
How was your experience with it?
Since this is amateur work, I cut too much Cowl and there is a little gap between it and Seat.
It was fine for use, but looks bad upon closer inspection.
But I don't care about that during the Race, so it's OK.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If anyone is going to compete in the Mini bike race with JC61, please refer to this page (well, no one is...).
View detail
I trusted the comments section and tried to buy it, but it did not arrive at the gixxer.
I trusted the comments section and tried to buy it, but it did not arrive at the gixxer.
Don't be fooled by the falsehood that the gap between the Light and the Grom is better for the Grom.
The stay does not attach to the brake master because it interferes with it, and the bolt that comes with it is too thin, so the OEM Product is used.
I had to return it to an auction house because I had opened the package.
View detail
Not compatible with overFull titanium muffler, but acceptable.
Satisfied with Total first.
I am satisfied with the Refreshing look of the lower part of the Engine.
I think it can be installed in NORMAL condition.
Brake pedal may interfere a little. (I think it depends on the individual)
Installation was rather easy with Bracket.
Next is the Cowl Mounting Bolt. In my case, I was concerned about the directness of the bolt, so I purchased KITACO's Nylon washer separately and tightened it.
However, over, GP-PERFORMANCE Full Titaniumium Full Exhaust Muffler interferes with it, so a small modification is required. (This shape same type may interfere) Also, GCraft's "Chikki-kun" (a small, sturdy, and strong machine) also needs to be processed.
I have attached a photo for your reference.
I processed it myself with BabyGrinder, so it doesn't look great! (TT) If you have a regulation such as Race, you may need to be careful because the Exhaust System part has been cut off. I was shaving it off for the purpose of dress-up. I had expected that.
The painting was done with Holtz's Luster Erase Black and Luster Erase Clear, but it was my first attempt at painting and I hid the failed areas with Sticker. (Chuckles) I noticed some spots on the bottom coat of Black, but it was too late, so I continued on with it, but we'll see what happens. If it comes off, I will have to reapply. I'm sure you all do a good job of prepping your work, but since it was a gel coat, you shouldn't cut corners just because you think it's good.
The Spray I bought this time is used up, so I'll see how it goes and if it doesn't work, I'll probably repaint it.
The value is also there, so I would like to request that the mussels be kept after the Gel coat is painted, even if only temporarily.
I'm looking at this from a beginner's perspective, so some mistakes may be unavoidable.
I also think Large sturdy because you all don't cut corners.
After a short run at the end, the lower part of the Under Cowl was warm and the heat from the exhaust pipe was transmitted. There was a gap of more than half a finger and less than one finger, which is a little worrisome. It depends on the future.
View detail
Excellent Fit with the vehicle body
It can be attached Firmly to the BodyFrame for a secure fit. View detail
A little small, but easy to install.
I removed and installed SEdition's Bikini cowl.
I was looking for a meter visor that can be attached with Kijima's Handlebar Mount Bracket.
Other manufacturers' products sometimes interfere with each other, but I bought the Endurance because I thought it would be large and sturdy, and it was perfect.
This time, I bought the Short Type, but the Long Type (6cm longer) might have been better.
They also sell a long type ScreenSingle Body, so if I want to change it, I'll probably buy that one.
I removed the Bikini cowl and Light Cover, although I can't install the SEdition as is.
The Bolt that was used to attach the Bikini cowl can be used to secure the Light.
The Bolt that was used to install the Light Cover is left over.
I've left the bracket on in case I want to put the Bikini cowl back on in the future.
I have the impression that the effect of the screen is not so different from that of the Bikini cowl.
I think the Long Type is not enough for highways, so you can choose which one is better by Design.
View detail
Looks good to me.
[How is it used?
It's nice to cut the wind.
Was the one you received as per Image?
Street Image
Was the installation difficult?
There was no Instruction Manual, so I was a little worried.
How was your experience with it?
Custom look
[Included Parts:were they on?
It comes with Bolt and Bracket
[Was there anything that disappointed you?
I want the Instruction Manual to come with it, just a sheet of paper.
Other items that would be helpful
No Instruction Manual/Request Instruction Manual is attached.
View detail
Screw...
When I attached the head lampBracket with the attached screw from the pure Normal Thread Screw, I was worried that the screw was too short and did not go in deeply. I have to change the bolt from OEM hex to normal home center. And the most important thing is that VisorBracket is connected in the middle next to Light Cover, but Screw hits Light Cover. Even if I adjust it forcibly, when I give the Light with the clearance of Limit 1mm, it hits the hanghang. Because I had no choice, I prepared a short Screw and changed it, but Nut was the last minute, so I put a thin Rubber on the gap with Double-sided Tape. View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Looks Sporty
It looks and feels like the key to a sporty look. I think that the windproof effect is not so much because it is small. It is relatively easy to install, and if the price is a little cheaper, it is good. View detail
Heavier than expected…
I haven't installed it yet but it's heavier than I thought it would be, I haven't removed the OEM so I can't compare.
I'm hoping the fins will help with the Cylinder's heat, but I'm not sure if it will work.
Design is good
View detail
Exactly Screen for REBEL!
It is easy to install, and the effect can be felt immediately in high-speed driving!
It could be a little larger.
View detail