Reviews
Design is fine, but ...
We like the design and use AERO Type.
My MONKEY125 is overdriven and travels about 20,000 km per year.
The car is 99% on road, so it is not running in a place with severe vibration, nor is it experiencing abnormal body vibration due to breakdowns, etc.
In fact, this is the third one I have purchased, because after 10,000 km or so, the area around the mounting point is cracking.
1pc. eye near the mounting Quant.:Pair (for Left and Right) The second time, the Right Side crack was quite large when viewed from the front and was repaired once, but as a result, the cracks expanded and became larger and larger.
Therefore, this time RType was purchased as Repair Parts because it is cheaper, and the original AEROScreen was transplanted.
I would like to see a little more durability, because I can't easily cheat on my MONKEY125 with another Bikini cowl, as it has become the identity of my MONKEY125.
I think it would be good for owners who are not over-driven like me, so if you like the design, you may purchase it.
View detail
I've changed my mind
The cowl is a bit on the large side, but its unbalance might be good. 。 You may have your preferences, but I'm ok with this. View detail
Satisfied
About quality and texture->The screen can be attached and detached quickly and easily, so it can be use as needed. About the feeling of use->fits very well
Difficulty of installation->very easy to install Cost performance and comparison with other products->The price is reasonable compared to other products
About shipping and packaging->Shipping was fast and packaged carefully.
Any concerns, cautions, or advice when purchasing->Satisfied so much installed on CB1100EX. It fits very well. The quick-release bolt design allows you to attach and detach very quickly, so you can go without a screen and quickly install and leave on tour ------------------------- --------------------------------- Installed in CB1100EX. It fits very well. QuickLee's type bolt design allows you to remove it very quickly, so you can install it quickly during the tour. Powered by Google Translator
View detail
difficult to install
Very difficult to install.
M6-10Cap screw is not possible.
It hits the Light and scratches it.
The bolt is too short and hard to assemble. you should give up cap screw and use Hexagon Bolt M6-15. you will have to go to Home center to buy it.
View detail
Great cowl
I have had this cowl on my Z900rs for about 3 seasons now and it has been perfect and looks great. I have been super happy with the purchase and would buy it again. The only reason it didn't get 5 stars is because it was a little to tight to mount and needed to elongate the holes a little with a dremel to get it to fit, I talked to a couple other people with the same cowl who needed to do the same thing. It was a simple fix and its been fantastic other than that. View detail
Fits: Others , HONDA CB400SF, HONDA CB-1, HONDA CB750, HONDA CB400FOUR, HONDA HORNET250, HONDA HORNET600, HONDA HORNET900, HONDA VTR250, HONDA VRX400, HONDA CB1300SF, HONDA CB400SS, HONDA JADE, HONDA X4, HONDA CB1100, YAMAHA XJR400R, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA RENAISSA, YAMAHA R1-Z
Good looks, good wind protection.
I bought it because the wind of high-speed driving was hard in zr-7 (NAKED).
I think there is a preference for each person, but personally, NAKED and Bikini cowl were absolute NG for the purpose of seeing.
However, I want to avoid the wind, and I hate Meter visor more than Bikini cowl.
Among them, I found this one that can be sold with the painting done.
If you specify OEM Color, you will receive a quality that you would expect from an OEM Product.
As for the installation, it is quite tight as shown in the description, and there is a feeling of forcing it, but once it is put on, it is finished as if it had been attached by OEM.
And when I get on the highway, it's completely different when I have this, the wind doesn't hit my stomach and it's very easy, and by the way, the Tank Bag doesn't catch the wind and it's stable.
In general, Large was the right purchase, if you have the opportunity to ride the highway, it is worth considering the introduction.
(But I like it better when it's not there.
View detail
Mounting on 2020
The 2020 has a different headlight position so the supplied bracket will not fit. The outer diameter is also different, so the Exactly will not fit.
However, Cowl itself has a good design and a beautiful paint job.
I didn't use the Fork Cramp that came with the kit, but used the 41mm Fork Cramp from DAYTONA, and because the screw hole is for M10, I also used the M10→M8Adapter from POSH.
Screw was attached with M8x35 of Cowl attachment, but because it is Limit, it seems that the length of 40mm is better.
View detail
It doesn't fit in 2020.
I bought it believing it because Manufacturer answered that it fits to 2020 in a certain Site.
On the 2020, the headlight is a little deeper than the LED, so the space between the headlight and cowl is about 30mm.
I will try to work it out through Bracket.
View detail
I am satisfied
It's beautifully made.
The water drainage hole in the hollow of the mounting part shows how careful it is.
Maybe it's because it's lower in height, but it's a little more comfortable because the wind that used to hit me right in the chin with the OEM is gone!
View detail
Bikini cowl mounting
There is a lot of gap between Cowl and Headlight, maybe it doesn't fit New ModelREBEL. View detail
subtle
The old model headlights are no problem to put on, but when I put on the New Model headlights, I had to stop them with a clasp because they didn't fit. The quality of the color is very good. View detail
The Z900RS becomes better parenthesis
This is the second Impression
I had a hard time installing it because the product was quite narrow (see previous Impressions) (Please do so) Therefore, the included Spacer was not needed
I've been wearing it for a few months now, and my biggest concern is that the static electricity causes dust to stick to it (because it's winter) (Maybe)
。
Secondly, it is difficult to evaluate because it is not possible to compare the finish of other similar products, but the surface is not smooth enough I guess
Finally, since this product is Plain, it is Cutting The sheet is attached
View detail
So-so?
Parenthesis better?
And as others have written, you'll have to pull hard to get it on
The color was good, but the paint was not as good, with some flaking and scratches
Not much wind protection
View detail
The Z900RS becomes better parenthesis
Less expensive than a certain Manufacturer's Bikini cowl, but Brake To make the Bracket and CandyToneBrown for fluidTank relocation I bought it because I like the thoughtfulness of the hardships of
The product I received was able to faithfully reproduce the OEM colors as described, but the Small Scratches (1 (mm×1mm, I think it's in the process of painting because it's not dented when touched) One place and a scratch There was one spot (1mm×1cm) (it's not noticeable, so I don't mind it)
Installation is a slightly different process than the instruction manual (not specific to the Z900RS) (which you'll understand soon enough) There was a problem, but I was able to make it Smooth for the most part Only, it took time to install, Cowl for the width of the Headlight fixed Bolt was narrow and needed to be widened considerably (which took some time)
As you can see in the picture, the gap between the Brake fluidTank and its Hose becomes quite narrow and (Adjustment is required to prevent contact between the two
Also, I'm almost in contact with Blinker (not enough to push Blinker down (Although not)
After installation, I drove on the highway, but the effect of AERO Type is different from before installation The wind was very light up to the point where it became calm from the chest upwards, but as you'd expect from a hundred kilometers..
I know it's a long story, but I wasn't really expecting the windproof effect so much as it was cool I'm glad I bought it
View detail
Cost performance is ◎
The paint is also finished in Beauty. It may seem so because Coating is done from the top (^_^;)
Just Stem Steel Emblem interfere and it does not attach ... ヽ (? д;;) A
I think I'll install it somehow.
Screen is [Color] Smoke and Size is Type R. There is almost no windbreak effect. We do not recommend if we expect windproof effect.
I am satisfied because it is Dress-up purpose.
View detail
Okay
Equipped in BoltCafe. Fork is 41 Φ
Between Fork and Mounting Hardware according to Instruction Manual
When the Rubber board was scissors and the washing Scissors had opened, it became state,
Attached Bolt can not be installed short.
Because I was stuck in a direction sandwiching the Rubber board honestly,
Purchased Bolt of 50 mm long separately
Because the hole through which Bolt passes is also somewhat curved
Also buy Nylon Lock Nut as a measure to relax.
In the case of Cafe, since the Speedometer is in front,
Visor angle is slightly vertical. It is not even anxious to say.
Throttle Wire and Brake hose interfere.
Tapingetc as a measure against friction. Eliminate with.
BoltCafe exclusive items are too expensive, but it can be said that high speed wind is tight.
Fantastic bending and excellent effect. I was able to imatinate a little
View detail
I installed in the XL 1200 C SPORTSTER 1200
Small It is a shark, but the rectification effect is high. While running, it interrupts the wind at the chest.
2010 XL 1200 XL 1200 C Matching to SPORTSTER 1200 and Balance is also good.
Installation was also easy with Instruction Manual so it was easy to install. It's OK to install for a change of pace.
View detail
Image changes and windbreak effect is enough
First of all, if you have Hexagonal Wrench, Spanner, Phillips Screwdriver it will be completed in about 30 minutes.
As for the clamp for installation, it is tough to use the Rubber board as written by other people, so it may be better to paste the protective Seal etc inside to make the work easier when adjusting the position during installation.
Because I did not have Protect Seat, I pasted the Seat of Carbon Style for the time being.
After installation, I tried to raise Speed ??from 60 km to over 100 km in trial run, but in the abdomen - Wind pressure to the chest was almost unchanged so we can expect a sufficient wind protection effect.
It is not so much Large Size so it is not a hindrance to vision and the appearance is also changed so it is recommended.
In other Manufacturer there are other parts for installation with Visor, but I think that this product is all set and conscientious because it is this price.
Of course I am solidly making it.
Regarding parts such as Bolt, we are concerned about rusting in the future, but we will consider it at that time.
Anyway it was a good shopping (^^)
(Sumimasen elsewhere purchase)
View detail
Fits: Others , HONDA CB400SF, HONDA CB-1, SUZUKI GSX400, SUZUKI BANDIT250, SUZUKI GSX1400, SUZUKI INAZUMA400, KAWASAKI W650, KAWASAKI ZRX1200, KAWASAKI ZRX1100-2, KAWASAKI ZR-7, KAWASAKI BALIUS2, SUZUKI ST250, SUZUKI VOLTY, KAWASAKI ZRX-2, KAWASAKI W400, KAWASAKI W800, KAWASAKI BALIUS, YAMAHA RENAISSA, YAMAHA R1-Z
Bikini cowl by far the best recommended!
I was wearing it in the 2004 model GSX 1400 that I was riding the previous time.
Compared to other Bikini cowlManufacturer, World Walk of impression one step behind in popularity is impression,
The price is very conscientious to the quality of the product, personally it is by far the most recommended Items.
If you contact the model of the car body and Color code, we will apply it to nearly OEM compatible paint!
* I'm sorry, I bought from World Walk's official HP so I could specify OEM Color,
Is it possible to designate OEM Color when ordering from Webike?
Installation will be fixed together with Headlight Bracket.
Since there are only two Bolt fixation points, it can not deny that there is some rattling as it is called Universal Product.
Also, depending on the model, there is a possibility that Cowl and Meter part interfere.
In fact GSX 1400, Cowl was pushed by wind pressure, the Meter part was hit by hanghang.
However, such a thing is a story that can be done by curing with Cushion Tape, there is no problem on practical use.
Durability was also wonderful, I used it for 3 years, but there were no cracks etc..
Although rubbing with Bike Cover caused some rubbing scratches, it was not limited to this product.
Windshield effect is also high, Touring dramatically became.
For this product, a dedicated Decal is prepared as an option, and if you contact the year and color code there, OEM (As close as possible to) You can purchase Color's one.
Because there are so many kinds of Decal, I think that it is also attractive that you can design your own one-off design.
Those who have anxiety in that they are cheap to scorch compared to other Bikini cowls, this is not that they are cheap at Pachimono.
Quality that I am convinced that it is becoming cheaper by corporate effort.
If you are considering buying Bikini cowl, I'd definitely recommend this item!
View detail
Fits: Others , HONDA CB400SF, HONDA CB-1, SUZUKI GSX400, SUZUKI BANDIT250, SUZUKI GSX1400, SUZUKI INAZUMA400, KAWASAKI W650, KAWASAKI ZRX1200, KAWASAKI ZRX1100-2, KAWASAKI ZR-7, KAWASAKI BALIUS2, SUZUKI ST250, SUZUKI VOLTY, KAWASAKI ZRX-2, KAWASAKI W400, KAWASAKI W800, KAWASAKI BALIUS, YAMAHA RENAISSA, YAMAHA R1-Z
I was struggling to install but I am satisfied.
DS-01 typeR
When installing Quantity : Pair (for Left and Right) Width was cramped.
XJR1300 (2002 year) I want a width of about 5 mm more in.
Nut side (?) I tried to cut it down with a File, but I spread it with two people and installed it somehow.
Painting OEM color (Silver 3) Satisfied with the beautiful painting of.
The windshield effect is also comfortable on the expressway as the wind does not hit the face from below.
It was saved with Cushion material sandwiched between Meter and Screen.
View detail