Reviews
Each person has his/her own preference.
I prefer it without the Bikini cowl, but I finally installed it because I could not stand the wind pressure when driving at high speeds.
I chose this product because I thought that if I was going to put it on, it should be a proper one, not a Universal or something like that.
As expected of an exclusive product, the color and fit are perfect.
And the Style after installation is not bad. I guess it's a matter of taste, but I thought this was the way to go.
The windproof effect is quite good. The area below the chest and shoulders is almost free from wind, so high speed driving is possible.
It became easier. However, the wind is now concentrated near my face, so it depends on the Jacket I am wearing.
Wind Cutting noise has become louder.
I wish it had One point, Line, etc. because the colors are monochromatic.
View detail
It's still good!
Installed on a 2023 SpeedTWIN1200.
I had no choice but to purchase a 2019 MODEL Bikini cowl, as there were none available on the market that corresponded to the 2023 model year.
The quality and style of the product after installation are satisfactory, although additional work is required to cut out some parts for installation due to the different year. However, I am satisfied with the quality and the style after installation.
View detail
CHIC DESIGN Road Comet Head cowl
About quality and texture Soild plastic made with the cowl itself and the wind shield About the feeling of use Looks great as I bought the Diablo black paint. The paint is similar as my yellow ball SE version I'm able to fit my Doremi Z2 signal lights. Difficulty of installation Less then 20 mins. Easy to install. I do not need to change my brake bracket as I'm already using Galespeed brake pump. Cost performance and comparison with other products. Great price with painting. Plastic is soild too for the price. About shipping and packaging Shipping is expensive as the item is big but it comes with its own box well wrap. Any concerns, cautions, or advice when purchasing. The top wind screen will be a bit vibranting if traveling in high speed. But bearable and stable enough. I went to a decal shop to install the similar design as the brand to save a bit of cost. Not perfect but still looks great View detail
I tried to be a human pillar.
I just installed it.
It is still too hot to ride.
I was sweating just installing it.
I thought this one was cooler than the Bikini cowl by the same manufacturer, which has many reviews, so I bought it even though there are no reviews of the product.
I didn't mind the SIDE design etc. and thought it was definitely better looking in person than in the Site photo.
To install, remove the light lens, and then fasten it by playing with the bolt that supports the light case?
Here, when the Bolt is tightened from the outside of the Cowl, the Cowl is slightly dented, but I think it is Spec.
Next, fasten the bolt on the back side of the Horn, which is a challenge unless you have good dexterity.
I will post photos for your reference if you are considering it.
View detail
It was not bad.
The Instruction Manual was a little confusing, but I managed to put it on.
Luggage Hook and Fender holes did not match and had to be cut out with File.
The finish is perfect.
I like it.
View detail
It is solidly built
Installation is also a simple matter of replacing the Headlight Bolt with the supplied Bolt and installing the Bracket next to the Horn to make it fit.
The position of the reserve tank was changed to a universal bracket because the handlebar had been replaced with a BEET taper handlebar and the included bracket would have come in contact with the cowl.
Cowl has no complaints at all, the paint is in good condition.
No rattling and no chatter noise at high speeds.
However, there is some tampering from wind pressure, but it is acceptable.
View detail
Road Comet
I ordered one for my Z900RS and it took me 4 months to get it, the design is perfect but some of the details are a little rough, which is a little disappointing. I made it by myself. The windproof effect is limited, but it makes a LARGE difference. I am looking forward to long touring in summer. View detail
I think Quality is great!
I bought it on the spur of the moment because only Surfacer paint was in stock.
As expected from a manufacturer famous for its Bikini cowl, the quality is good. I was able to put it on easily and efficiently.
Since there is no bracket where the screen extends, I was worried that it might flap at high speeds, but it was no problem at around 100 km/h.
I didn't have any problems using it, but I removed it because I preferred a round shape with more rounded corners, so I thought something was different.
View detail
CHIC DESIGN Masker Load
It fits perfectly.
There is no difference between the paint and the body color, and there is no sense of discomfort.
As for aerodynamic issues after installation, I haven't driven on the highway.
I don't know the effect, but I think the wind hitting the Helmet is less.
Total and it is a very good product.
View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel300, HONDA Rebel300
Masker Load
The Exclusive Bracket must be tightened from the Blinker side to fit the Nut hole, and the Slot cable does not need to be tightened.
The Screen installation Bolt was not included.
View detail
High quality of paint
I thought it would take three months, but it arrived in a little over two months!
I don't think you'd be able to tell that the paint is so beautiful that it's called an OEM Product!
I can't test the wind protection effect because of the SeasonOff, but I'm satisfied with the quality and large change after waiting two months.
Since I have a BEET with Handle, I have replaced the Master Tank Bracket with an external Universal Bracket instead of Included Parts to ensure clearance.
View detail
Large satisfied ??
Naked-style is a favorite, and customization is done so as not to break the style of NORMAL as much as possible, and for a while, it was running with Screen only about the windshield.
However, when I went out on a long touring trip, I couldn't stand the pain in my butt anymore and introduced the High seat. Then I started to feel somewhat poorly around the Light and decided to buy a Bikini cowl. There were many options, but I liked the CHIC DESIGN cowl so I decided to buy one made by CHIC DESIGN and after much debate, I decided to buy this one because it has 20% more wind protection.
The moment I received the Corrugated cardboard box at home and opened it, I was smitten. It is well built and the best part is that the paint job is perfect. It was relatively easy to install and took less than an hour to complete. The only problem I had was that it interfered with the original emblem.
The key is the wind protection performance, but on the highway, I think that the way the wind passes through is smoother than before the installation, but I do not feel the benefit when driving down the road. I don't think you should expect too much in terms of performance. However, the style is perfect and it is a great product with no wobble, if you have a z900rs and you are considering a Bikini cowl, this is a real recommendation.
View detail
It looks like an OEM cowl.
It took me a little bit of time to install it, including going to buy it due to lack of tools, but I'm very happy with it after installation. I love the color and shape. No wobbling while driving! View detail
I'm generally happy with it.
The long tail cowl of the Z900RS has been sold by many companies, but the homage to the air-cooled Z is CHIC DESIGNTail has an OEM extension type of SMARTLong I love it and bought it.
・Design
It has a sharp shape and design that accentuates its length, which is not the case with the ZStyle of other companies.
Quality
FRP Cowl Fitting with little distortion. There are a few holes in the Gap, but it is acceptable, as well as some ugly parts in terms of wiring and design The OEM paint job is not as good as the color. Good quality without Gap.
?attachment
First, note that the instruction manual is pretty About.
Normal bolt, Bracket, License Plate Light and many others are used. In order to do so, we want to be careful about changes from CustomSpec.
No special tools are needed to install the Loader Hook, and there is no need for any special tools to fit the Loader Hook. It was necessary to widen the hole.
With some skill, there are no difficulties.
Complaints
OEM diversions are common.
Even if you install the kit, the hole of BodyWiring start-up is not hidden. I've blocked it up with a few, but I want consideration.
The License Plate Light would have been better if it was a slim LED instead of an OEM appropriation.
You can't choose a reflector because the reflector bracket is integrated.
General Comment
It has some difficulties, but overall it is a good part with good balance. Expensive, but I do not regret the purchase.
It is my personal opinion that the RS looks sharper and bigger than the thicker long tail of other companies. I am satisfied with the results.
If you don't swing to Retro, this is the Tail cowl kit from Recommendation.
View detail
It's a pimp!
SIDEBolt and Bowl bottom bolts are also installed without any error It's done I'll report back later on the performance as I'll be riding it in earnest Costumes are still a bit high! View detail
I am satisfied
It feels so natural that it's hard to tell if it's an OEM product
The coloration was not uncomfortable
There is no jumpy noise or interference with other parts
It vibrates fine when idling, and when passing over a rough road surface, it's a good thing that it's a burr
That's what it's all about, isn't it? (Lol)
Nervous people may be concerned
This is the effect of high speed driving, but there is also a slight difference between having it and not having it
I don't think you should expect much, but I'm sure it will be a little easier because it will reduce the wind hitting your Body I think
Anyway, I'm very happy with the way it looks
View detail
liked it
The Cowl arrived last summer, but I didn't have time to wear it, so I finally did
Parenthesis is pretty good
In the case of BEET's Handlebar, however, you can use Bracket and Nut And you'll have to buy a Bolt and do some Small work to get it on
Brake fluid messed up!
View detail
Very good
I've been thinking about it for a long time and I'm glad I put it on The dimensions are fine
It went on easily The color was not different from MotorcycleBody
View detail
Wow that's cool
Bolt On for all installations
An Instruction Manual with illustrations is also included, and that's it! Even with my lack of knowledge, I was able to install it in about 2 hours
It is important to note that the removal of the Master Cylinder Bracket will result in an 8mm To remove the Hexagon Bolt, you need a Socket or Spanner for the 8mm Quantity:2pc. Set required (I'll make the rounds.)
I only had one Tools Set, so I had to run to buy a Spanner Did …
The treatment of the surface visible from the rider's side needs to be done a little better considering the Gold amount of the product
Also, the SparkRingBlack is a monochromatic paint job and doesn't come with a Decal I wish this one was included too, considering the gold amount
The installation itself is solid with no jumpy sound as it is fixed by screw at three points on the side and bottom It is
Is the wind protection effect not that much different than when you don't have it on? It's about
I'm not sure if it's a good idea to get down on the Motorcycle or not I think it's an Items that enjoy the change in look and feel
As others have said, the ForkEmblem holds the underside of the Bikini Cowl in place It seems to interfere with the Bracket
I've tried
dr.zRACING's ForkEmblem could not be installed
View detail
Fairing
Beautiful design and fit. Easy to instal. Well made. Color is not quite right. Too dark on the brown and the orange has too much red in it. Top portion where screen is attached vibrates a bit at 110kph. I am still happy with it and prepared to overlook these slight issues. View detail